Publications

6.1. Books:

1.1.1        Metal Additive Manufacturing: Principles, Techniques and Applications, Editors: R. Rajasekar, A. Mostafaei, C. Mogana Priya, P. Sathish Kumar, 1st edition, Wiley-Scrivener (2025).

1.2  Book chapters:

6.2.6. M. Mariani, N. Lecis, A. Mostafaei, Chapter 13: Binder jetting-based metal printing, Solid-State Metal Additive Manufacturing Processes, Mechanical Properties, and Applications. Wiley-VCH GmbH, of Boschstr. 12, 69469 Weinheim, Germany, 2024. Link

6.2.5. B.J. Paudel, A.C. To, A. Mostafaei, Chapter 15: Principles of Solid-State Sintering, Solid-State Metal Additive Manufacturing Processes, Mechanical Properties, and Applications. Wiley-VCH GmbH, of Boschstr. 12, 69469 Weinheim, Germany, 2024. Link

6.2.4. A.M. Elliott, C.L. Cramer, P. Nandwana, M. Chmielus, A. Mostafaei, “Binder Jet – Metals”, Encyclopedia of Materials: Metals and Alloys, Elsevier, pp. 120-133, 2022. Link

6.2.3. A. Mostafaei, A. Heidarzadeh, D. Brabazon, “Production of Metal Matrix Composites Via Additive Manufacturing”, Encyclopedia of Materials: Composites, Elsevier, pp. 605-614, 2021. Link

6.2.2. A. Mostafaei, J.V. Gordon, A.D. Rollett, “Additive Manufacturing of Cobalt Alloys”, ASM Handbook, Vol. 24, Additive Manufacturing Processes, 2020. Link

6.2.1. Z. Wu, S.R. Yarasi, A. Mostafaei, A.D. Rollett, Powder Characterization for Metal Additive Manufacturing, ASM Handbook, Vol. 24, Additive Manufacturing Processes, 2020. Link

1.3  Journal papers:

6.3.89. A. De Nardi, A. Mohammadzdeh, A. Mostafaei, JM Torralba, Laser powder bed fusion of a novel CoNi-based high entropy superalloy, Materials & Design, (2025) Accepted.

6.3.88. M. Mehdizade, H. Keshavarz, F. Marashi-Najafi, M. Tayebi, A. Mostafaei, A.R. Eivani, A Comprehensive Review of Microstructure and Mechanical Properties of Friction Stir Processed Magnesium Alloys and Composites, Journal of Magnetism and Alloys, (2025) Accepted.

6.3.87. M. Vafaei, Z. Deng, D. Jiang, F. Ning, A. Mostafaei, Anisotropic shrinkage of binder jetted components: Simulation and in-situ experimental measurement for validation, JOM, (2025) Accepted.

6.3.86. M. Khademitab @, A. Mostafaei, Structure-property relationships of sintered and differently heat-treated binder jet printed 17-4 PH stainless steel, Materials Characterization, (2025) Accepted.

6.3.85. M. Khademitab @, I-T. Ho, E. Jenssen *, M. Heim, A.J. Gradi Jr, C. Beamer, T. Kunda, A. Mostafaei, Effects of powder recycling, binder deposition, and HIP treatment on structure-property relationships in binder jetted 316L stainless steel, Materials Today Communications, 48 (2025) 113432. Link

6.3.84. M. Asherloo @, Y. Lee, C. Beamer, V.M. Miller, A. Mostafaei, Unravelling the impact of pressure and hold time in post-process heat treatments on microstructure and hardness evolution in laser powder bed fusion Alloy 718, Progress in Additive Manufacturing, (2025) Link.

6.3.83. J. Mohammadi @, A.R. Riahi, A. Mostafaei, Refined microstructure and mechanical properties in wire arc additive manufacturing of 17–4PH: Effect of heat treatment, Materials Today Communications, 47 (2025) 113011. Link

6.3.82. Z. Wu, A.D. Rollett, A. Mostafaei, Fatigue Behavior of Low-Cost, Non-Spherical Ti-6Al-4V Powder Processed via Laser Powder Bed Fusion, International Journal of Advanced Manufacturing Technology, 137 (2025) 5177–5183. Link

6.3.81. J.M. Torralba, A. Meza, V. Sivagnana, A. Mostafaei, A. Mohammadzadeh, From High-Entropy Alloys to Alloys with High Entropy: A New Paradigm in Materials Science and Engineering for Advancing Sustainable Metallurgy, Current Opinion in Solid State & Materials Science, 36 (2025) 101221. Link

6.3.80. V. Salarvand, F. Ahmadian, M. Torabpour, O. Mehrabi, H. Sohrabpoor, M. Rezayat, M. Hossein Abidi, A. Mostafaei, D. Brabazon, Analysis of Microstructure, Mechanical Properties and Corrosion Resistance of Dissimilar Weld Joints Between 304 Stainless Steel and Inconel 600 Manufactured by Gas Tungsten Arc Welding, International Journal of Pressure Vessels and Piping, 212B (2024) 105356 Link.

6.3.79. M Asherloo @, M Sampath Ramadurai @, M Heim, D Nelson, M Paliwal, I Ghamarian, AD Rollett, A Mostafaei, Powder-process-structure-property relationships of laser powder bed fusion non-spherical Ti-6Al-4V powder through experimental and analytical studies of fatigue performance, Additive Manufacturing, 95 (2024) 104534 Link.

6.3.78. P. Akbari, M. Zamani, A. Mostafaei, Machine Learning Predictions of Spatter Behavior in LPBF Additive Manufacturing, Materialia, 38 (2024) 102268 Link.

6.3.77. I. Dashtgerd @, A. Cahoon @, N. Rasouli, M. Hemmati, M. Khademitab @, S.M. Saghaian, S.E. Saghaian, M. Vaicik, M. Daly, A. Mostafaei, Fabrication of porous Ni-Ti shape memory alloy via binder jet additive manufacturing and solid-state sintering, Materials Today Communications, 41 (2024) 110633 Link.

6.3.76. P. Akbari, M. Zamani, A. Mostafaei, Machine Learning Prediction of Mechanical Properties in Metal Additive Manufacturing, Additive Manufacturing, 91 (2024) 104320 Link.

6.3.75. M. Jamalkhani @, M. Dorula @, E. Roberts @, A. Mostafaei, Densification kinetics, microstructural evolution and mechanical properties of isothermally sintered binder jetted 316L stainless steel, Journal of Manufacturing Processes, 125 (2024) 267-282 Link.

6.3.74. M Jamalkhani @, M Khademitab @, I Dashtgerd @, A. Cassese, C. Beamer, A. Mostafaei, Hot isostatic pressing of differently sintered binder jetted 316L stainless steel: microstructure evolution and mechanical properties, Materials Today Communications, 40 (2024) 109529 Link.

6.3.73. A. Mohammadzdeh, A. De Nardi, F. Omidbakhsh, D. Garbiec, A. Fardan, E. Hryha, A. Mostafaei, J. M. Torralba, A novel alloy design approach in developing CoNi-based high entropy superalloy using thermodynamical calculations and spark plasma sintering, Materials Science and Engineering A, 909 (2024) 146841 Link.

6.3.72. M. Jamalkhani @, Z. Deng, D. Sossong @, I. Dashtgerd @, G. Martiska, A. Mostafaei, In-situ monitoring of sintering and analytical modeling of densification and shrinkage in binder jetted 316L stainless steel, Materialia, 36 (2024) 102131. Link

6.3.71. J. Mohammadi @, I. Dashtgerd @, S. An *, B. Trinh @, A. Mostafaei, A.R. Riahi, Microstructure and Mechanical Properties of 17-4 PH Stainless Steel Fabricated by Gas Metal Wire Arc Additive Manufacturing, Materials Today Communications, 39 (2024) 108985. Link

6.3.70. M Khademitab @, M Jamalkhani @, K Bishaj *, E Jenssen *, M Asherloo @, M Heim, D Nelson, NM. O’Dowd, A. Mostafaei, Does Selective Shell Printing Advance Binder Jetting Additive Manufacturing? Powder Technology, 441 (2024) 119812. Link

6.3.69. M Dorula *, M Khademitab @, M Jamalkhani @, A. Mostafaei, Location-dependency of green density and dimension variation in binder jetted parts, The International Journal of Advanced Manufacturing Technology, 132 (2024) 2853-2861. Link

6.3.68. M Khademitab @, P Rodriguez de Vecchis, P Staszel *, MK Vaicik, M. Chmielus, A. Mostafaei, Structure-property relationships of differently heat-treated binder jet printed Co-Cr-Mo biomaterial, Materials Today Communications, 38 (2024) 107716. Link

6.3.67. J Mohammadi, I Dashtgerd, AR Riahi, A. Mostafaei, Pulsed gas metal arc additive manufacturing of low-carbon steel: Microstructure observations and mechanical properties, Materials Today Communications, 38 (2024) 107637. Link

6.3.66. MH Delpazir @, M Asherloo @, S Nasiri Khalil Abad, A Thompson @, V Guma @, SD Bagi @, K Kumar Sreenivas *, M Paliwal, J Terry, AD Rollett, A. Mostafaei, Microstructure and corrosion behavior of differently heat-treated Ti-6Al-4V alloy processed by laser powder bed fusion of hydride-dehydride powder, Corrosion Science, 224 (2023) 111495. Link

6.3.65. P. Rodriguez De Vecchis, A. Mostafaei, M Chmielus, Densification kinetics and microstructural evolution of binder jet printed and sintered porous Ni-Mn-Ga magnetic shape-memory alloys, Acta Materialia, 260 (2023) 119323. Link

6.3.64. M Asherloo @, Z Wu, JEC Sabisch, I Ghamarian, AD Rollett, A Mostafaei, Variant selection in laser powder bed fusion of non-spherical Ti-6Al-4V powder, Journal of Materials Science & Technology 147 (2023) 56-67. Link

6.3.63. M. Jamalkhani @, B. Nathan @, M. Heim, D. Nelson, A. Mostafaei, Fatigue behavior of vacuum-sintered binder jetted fine 316L stainless steel powder, Materials Science and Engineering A, 873 (2023) 144937. Link

6.3.62. A. Mostafaei, S.R. Ghiaasiaan, I-T. Ho @, S. Strayer, K-C. Chang, N. Shamsaei, S. Shao, S. Paul, A-C. Yeh, S. Tin, A.C. To, “Additive Manufacturing of Nickel-based superalloys: A state-of-the-art review on process-structure-defect-property relationship”, Progress in Materials Science, 136 (2023) 101108. Link

6.3.61. A. Babaei-Dehkordi, M. Soltanieh, M. Mirjalili, M. Asherloo @, A. Mostafaei, “Understanding Interfacial Reactions in Ti–Ni Diffusion Couple”, Materials, 16 (2023) 2267. Link

6.3.60. M. Asherloo @, J. Hwang *, R. Leroux, Z. Wu, K. Fezzaa, M. Paliwal, A.D. Rollett, A. Mostafaei, Understanding process-microstructure-property relationships in laser powder bed fusion of non-spherical Ti-6Al-4V powder, Materials Characterization, 198 (2023) 112757. Link

6.3.59. R. Jiang, Z. Ren, J. Aroh, A. Mostafaei, B. Gould, T. Sun, A.D. Rollett, “Quantifying equiaxed versus epitaxial solidification in laser melting of CMSX-4 single crystal superalloy”, Metallurgical and Materials Transaction A, 54 (2023) 808-822. Link

6.3.58. V. Salarvand, M. Abedini Mohammadi, A. Yousefifar, M. Saghafi Yazdi, A. Mostafaei, “Facile hydrothermal synthesis of combined MoSe2PS nanostructures on nickel foam with superior electrocatalytic properties for hydrogen evolution reaction”, International Journal of Hydrogen Energy, 48 (2023) 10038-10050. Link

6.3.57. M. Asherloo @, Z. Wu, J.E.C. Sabisch, I. Ghamarian, A.D. Rollett, A. Mostafaei, “Variant selection in laser powder bed fusion of non-spherical Ti-6Al-4V powder” Journal of Materials Science & Technology, 147 (2023) 56-67. Link

6.3.56. V. Salarvand, M. Abedini Mohammadi, F. Ahmadian, F. Rajabi Kouchi, M. Saghafi Yazdi, A. Mostafaei, “In-situ hydrothermal synthesis of NiCo (X) Se compound on nickel foam for efficient performance of water splitting reaction in alkaline media”, Journal of Electroanalytical Chemistry, 926 (2022) 116929. Link

6.3.55. A. Babaei-Dehkordi, M. Soltanieh, M. Mirjalili, A. Mostafaei, “Quantitative analysis of diffusion kinetics of intermetallic formation in Ni–Ti system”, Journal of Materials Research and Technology, 20 (2022) 4545-4555. Link

6.3.54. A.R. Farmani, M.A. Salmeh, Z. Golkar, A. Moeinzadeh, F. Farid Ghiasi, S. Zamani Amirabad, M.H. Shoormeij, F. Mahdavinezhad, S. Momeni, F. Moradbeygi, J. Ai, J.G. Hardy, A. Mostafaei, “Li-Doped Bioactive Ceramics: Promising Biomaterials for Tissue Engineering and Regenerative Medicine”, Journal of Functional Biomaterials, 13 (2022) 162. Link

6.3.53. M. Jamalkhani @, M. Asherloo, @ O. Gurlekce @, I-T. Ho @, M. Heim, D. Nelson, A. Mostafaei, “Deciphering microstructure-defect-property relationships of vacuum-sintered binder jetted fine 316L austenitic stainless steel powder”, Additive Manufacturing, 59 (2022) 103133. Link

6.3.52. M. Asherloo @, Z. Wu, M. Heim, D. Nelson, M. Marucci, M. Paliwal, A.D. Rollett, A. Mostafaei, “Fatigue performance of laser powder bed fusion hydride-dehydride Ti-6Al-4V powder” Additive Manufacturing, 59 (2022) 103117. Link

6.3.51. M. Asherloo @, Z. Wu, M.H. Delpazir @, E. Ghebreiesus *, S. Fryzlewicz *, R. Jiang, B. Gould, M. Heim, D. Nelson, M. Marucci, M. Paliwal, A.D. Rollett, A. Mostafaei, “Laser-beam powder bed fusion of cost-effective non-spherical hydride-dehydride Ti-6Al-4V alloy”, Additive Manufacturing, 56 (2022) 102875. Link

6.3.50. Y. Behnamian, E. Aghaie, L. Serate, Z, Tolentino, H. Niazi, A. Mostafaei, Synthesis, characterization, and photocatalytic activity of CuAl2O4-Ag nanocomposite for water treatment, Ceramics International, 48 (2022) 27988-27994. Link

6.3.49. A. Acierno, A. Mostafaei, J. Toman, K. Kimes, M. Boin, R. Wimpory, V. Laitinen, A. Saren, K. Ullakko, M. Chmielus, “Characterizing Changes in Grain Growth, Mechanical Properties, and Transformation Properties in Differently Sintered and Annealed Binder-Jet 3D Printed 14M Ni-Mn-Ga Magnetic Shape Memory Alloys”, Metals, 12 (2022) 724. Link

6.3.48. V. Salarvand, H. Sohrabpoor, M.A. Mohammadi, M. Nazari, R. Raghavendra, A. Mostafaei, D. Brabazon, Microstructure and corrosion evaluation of as built and heat-treated 316L stainless steel manufactured by laser powder bed fusion, Journal of Materials Research and Technology, 18 (2022) 4104-4113. Link

6.3.47. A. Mostafaei, C. Zhao, Y. He, S.R. Ghiaasiaan, B. Shi, S. Shao, N. Shamsaei, Z. Wu, N. Khouraytem, T. Sun, J. Pauza, J.V. Gordon, B. Webler, N.D. Parab, M. Asherloo @, Q. Guo, L. Chen, A.D. Rollett, “Defects and anomalies in powder bed fusion metal additive manufacturing”, Current Opinion in Solid State and Materials Science, 26 (2022) 100974. Link

6.3.46. Y. Behnamian, D. Serate; E. Aghaie; R. Zahiri; Z. Tolentino; H. Niazi; A. Mostafaei, “Tribological behavior of ZK60 magnesium matrix composite reinforced by hybrid MWCNTs/B4C prepared by stir casting method”, Tribology International, 165 (2022) 107299. Link

6.3.45. Z. Wu, M. Asherloo @, R. Jiang, M.H. Delpazir @, A. Sivakumar, M. Paliwal, J. Capone, B. Gould, A.D. Rollett, A. Mostafaei, “Study of Printability and Porosity Formation in Laser Powder Bed Fusion Built Hydride-Dehydride (HDH) Ti-6Al-4V”, Additive Manufacturing, 47 (2021) 102323. Link

6.3.44. C. Zheng, A. Mostafaei, P. Rodriguez de Vecchis, I. Nettleship, M. Chmielus, “Microstructure evolution for isothermal sintering of binder jet 3D printed alloy 625 above and below the solidus temperature”, Additive Manufacturing, 47 (2021) 102276. Link

6.3.43. E. Stevens, K. Kimes, D. Salazar, A. Mostafaei, R. Rodriguez, A. Acierno, P. Lázpita, V. Chernenko, M. Chmielus, “Mastering a 1.2 K hysteresis for martensitic para-ferromagnetic partial transformation in Ni-Mn(Cu)-Ga magnetocaloric material via binder jet 3D printing”, Additive Manufacturing, 37 (2020) 101560. Link

6.3.42. R. Jiang, L. Monteil, K. Kimes, A. Mostafaei, M. Chmielus, “Influence of powder type and binder saturation on binder jet 3D–printed and sintered Inconel 625 samples”, The International Journal of Advanced Manufacturing Technology, 116 (2021) 3827-3838. Link

6.3.41. A. Mostafaei, P. Rodriguez De Vecchis, K.A. Kimes, D. Elhassid, M. Chmielus, “Effect of print processing parameters on microstructure and resulting properties of sinter-HIP binder-jet 3D-printed WC-Co composites”, Additive Manufacturing, 46 (2021) 102128. Link

6.3.40. A. Mostafaei, A.M. Elliott, J.E. Barnes, F. Li, W. Tan, C.L. Cramer, P. Nandwana, M. Chmielus, “Binder jet 3D printing – process parameters, materials, properties, modeling and challenges”, Progress in Materials Science, 119 (2021) 100707. Link

6.3.39. A. Heidarzadeh, S. Mironov, R. Kaibyshev, G. Cam, A. Simar, A. Gerlich, F. Khodabakhshi, A. Mostafaei, D.P. Field, J.D. Robson, A. Deschamps, P.J. Withers, “Friction stir welding/processing of metals and alloys: A comprehensive review on microstructural evolution”, Progress in Materials Science, 117 (2020) 100752. Link

6.3.38. A. Mohammadzadeh, M. Khoshghadam-Pireyousefan, B. Shokrianfard-Ravasjan, M. Azadbeh, H. Rashedi, M. Dibazar, A. Mostafaei, “Synergetic photocatalytic effect of high purity ZnO pod shaped nanostructures with H2O2 for methylene blue dye degradation”, Journal of Alloys and Compounds, 845 (2020) 156333. Link

6.3.37. M. Badr, A. Mohammadzadeh, J. Khalil-Allafi, M. Khoshghadam-Pireyousefan, A. Mostafaei, “In-situ formation of TiN-TiO2 composite layer on TiNi shape memory alloy via fluidized bed reaction”, Ceramic International, 46 (2020) 21097-21106. Link

6.3.36. S. Nasiri Khalil Abad, J. Moghaddam, M. Mozammel, A. Mostafaei, M. Chmielus, “Highly porous, flexible and robust cellulose acetate/Au/ZnO hybrid plasmonic photocatalyst”, Applied Surface Science, 526 (2020) 146237. Link

6.3.35. R. Jiang, A. Mostafaei, Z. Wu, A. Choi, P-W. Guan, M. Chmielus, A.D. Rollett, “Effect of heat treatment on microstructural evolution and hardness heterogeneity in laser powder bed fusion of Inconel 718”, Additive Manufacturing, 35 (2020) 101282. Link

6.3.34. P. Nosrati, M. Khoshghadam-Pireyousefan, A. Mohammadzadeh, M. Azadbeh, M. Hayati, A. Mostafaei, “One -step synthesis of the high purity ZnO micro/nanostructures from pure Zn and pre-alloyed brass powders by vapor phase transport method”, Ceramic International, 46 (2020) 11689-11697. Link

6.3.33. A. Mostafaei, P. Rodriguez De Vecchis, M.J. Buckenmeyer, S.R. Wasule, B.N. Brown, M. Chmielus, “Microstructural evolution and resulting properties of binder jet 3D printed Stellite 6”, Materials Science & Engineering C, 102 (2019) 276-288. Link

6.3.32. R. Jiang, A. Mostafaei, J. Pauza, C. Kantzos, A.D. Rollett, “Varied heat treatments and properties of laser powder bed printed Inconel 718”, Materials Science & Engineering A, 755 (2019) 170-180. Link

6.3.31. A. Mostafaei, P. Rodriguez De Vecchis, I. Nettleship, M. Chmielus, “Effect of powder size distribution on densification and microstructural evolution of binder-jet 3D-printed alloy 625”, Materials & Design, 162 (2019) 375-383. Link

6.3.30. S. Nasiri Khalil Abad, J. Moghaddam, M. Mozammel, A. Mostafaei, M. Chmielus, “Growth mechanism and charge transport properties of hybrid Au/ZnO nanoprisms”, Journal of Alloys and Compounds, 777 (2019) 1386-1395. Link

6.3.29. A. Mostafaei, S.H.V.R. Neelapu, C. Kisailus, L.M. Nath, T.D.B. Jacobs, M. Chmielus, “Characterizing surface finish and fatigue behavior in binder jet 3D printed alloy 625”, Additive Manufacturing, 24 (2018) 200-209. Link

6.3.28. A. Mostafaei, P. Rodriguez De Vecchis, E.L. Stevens, M. Chmielus, “Sintering regimes and resulting microstructure and properties of binder jet 3D printed Ni-Mn-Ga magnetic shape memory alloys”, Acta Materialia, 154 (2018) 355-364. Link

6.3.27. A. Mostafaei, C. Hilla, E. L. Stevens, K. A. Kimes, P. Nandwana, A.M. Elliott, M. Chmielus, “Characterization of differently atomized nickel-based alloy 625 powders”, Powder Technology, 333 (2018) 180-192. Link

6.3.26. A. Mostafaei, E.L. Stevens, J.J. Ference, D.A. Schmidt, M. Chmielus, “Binder jetting of a complex-shaped metal partial denture framework”, Additive Manufacturing, 21 (2018) 63-68. Link

6.3.25. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Shalchi Amirkhiz, J. Li, Y. Zeng, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, J.L. Luo, “Characterization of oxide layer and micro-crack initiation in alloy 316L stainless steel after 20000 h exposure to supercritical water at 500 °C”, Materials Characterization, 131 (2017) 532-543. Link

6.3.24. A. Mostafaei, K.A. Kimes, E.L. Stevens, J. Toman, Y.L. Krimer, K. Ullakko, M. Chmielus, “Microstructural evolution and magnetic properties of binder jet additive manufactured Ni-Mn-Ga magnetic shape memory alloy foam”, Acta Materialia, 131 (2017) 482-490. Link

6.3.23. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Zahiri, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, J.L. Luo, “Corrosion behavior of alloy 316L stainless steel after exposure to supercritical water at 500 °C for 20000 h”, Journal of Supercritical Fluids, 127 (2017) 191-199. Link

6.3.22. A. Mostafaei, E.T. Hughes, C. Hilla, E.L. Stevens, M. Chmielus, “Data on the densification during sintering of binder jet printed samples made from water- and gas-atomized alloy 625 powders”, Data in Brief, 10 (2017) 116-121. Link

6.3.21. A. Mostafaei, J. Toman, E.L. Stevens, E.T. Hughes, Y.L. Krimer, M. Chmielus, “Microstructural evolution and mechanical properties of differently heat-treated binder jet printed samples from gas- and water-atomized alloy 625 powders”, Acta Materialia, 124 (2017) 280-289. Link

6.3.20. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Shalchi Amirkhiz, J. Li, R. Zahiri, E. Aghaie, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, J.L. Luo, “Internal oxidation and crack susceptibility of alloy 310S stainless steel after long term exposure to supercritical water at 500 °C”. Journal of Supercritical Fluids, 120 (2017) 161-172. Link

6.3.19. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Shalchi Amirkhiz, M. Chmielus, W. Zheng, D. Guzonas, W. Chen, J.L. Luo, “A comparative study on the oxidation of austenitic alloys 304 and 304-oxide dispersion strengthened steel in supercritical water at 650 °C”, Journal of Supercritical Fluids, 119 (2017) 245–260. Link

6.3.18. A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, M. Chmielus, “Brief data overview of differently heat-treated binder jet printed samples made from argon atomized alloy 625 powder”, Data in Brief, 9 (2016) 556-562. Link

6.3.17. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Shalchi Amirkhiz, D. Serate, W. Zheng, D. Guzonas, M. Chmielus, W. Chen, J.L. Luo, “Characterization of oxide scales grown on alloy 310S stainless steel after long term exposure to supercritical water at 500 °C”, Materials Characterization, 120 (2016) 273-284. Link

6.3.16. A. Mostafaei, Y. Behnamian, Y.L. Krimer, E.L. Stevens, J.L. Luo, M. Chmielus, “Effect of solutionizing and aging on the microstructure and mechanical properties of powder bed binder jet printed alloy 625 nickel-based superalloy”, Materials & Design, 111 (2016) 482-491. Link

6.3.15. A. Mostafaei, E.L. Stevens, E.T. Hughes, S.D. Biery, C. Hilla, M. Chmielus, “Powder bed binder jet printed alloy 625: densification, microstructure and mechanical properties”, Materials & Design, 108 (2016) 126-135. Link

6.3.14. Y. Behnamian, A. Mostafaei, A. Kohandehghan, B. Shalchi Amirkhiz, D. Serate, Y. Sun, S. Liu, E. Aghaie, Y. Zeng, M. Chmielus, W. Zheng, D. Guzonas, W. Chen, J.L. Luo, “A comparative study of oxide scales grown on stainless steel and nickel-based superalloys in ultra-high temperature supercritical water at 800 °C”. Corrosion Science, 106 (2016) 188-207. Link

6.3.13. M. Shirinzadeh-Dastgiri, J. Mohammadi, Y. Behnamian, A. Eghlimi, A. Mostafaei, “Metallurgical investigations and corrosion behavior of failed weld joint in AISI 1518 low carbon steel pipeline”, Engineering Failure Analysis, 53 (2015) 78-96. Link

6.3.12. J. Mohammadi, Y. Behnamian, A. Mostafaei, A.P. Gerlich, “Tool geometry, rotation and travel speeds effects on the properties of dissimilar magnesium/aluminum friction stir welded lap joints”, Materials & Design, 75 (2015) 95–112. Link

6.3.11. J. Mohammadi, Y. Behnamian, A. Mostafaei, H. Izadi, T. Saeid, A.H. Kokabi, A.P. Gerlich, “Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations”, Materials Characterization, 101, (2015) 189–207. Link

6.3.10. D. Kianersi, A. Mostafaei, J. Mohammadi, “Effect of Welding Current and Time on the Microstructure, Mechanical Characterizations, and Fracture Studies of Resistance Spot Welding Joints of AISI 316L Austenitic Stainless Steel”, Metallurgical and Materials Transactions A, 45 (2014) 4423-4442. Link

6.3.9. D. Kianersi, A. Mostafaei, A.A. Amadeh, “Resistance spot welding joints of AISI 316L austenitic stainless-steel sheets: Phase transformations, mechanical properties and microstructure characterizations”, Materials & Design, 61 (2014) 251-263. Link

6.3.8. F. Nasirpouri, A. Mostafaei, L. Fathyounes, R. Jafari, “Assessment of localized corrosion in carbon steel tube grade AISI 1045 used in output oil–gas separator vessel of desalination unit in oil refinery industry”, Engineering Failure Analysis, 40 (2014) 75-88. Link

6.3.7. A. Mostafaei, F. Nasirpouri, “Epoxy/polyaniline-ZnO nanorods hybrid nanocomposite coatings: Synthesis, characterization and corrosion protection performance of conducting paints”, Progress in organic coatings, 77 (2014), 146-159. Link

6.3.6. A. Mostafaei, F. Nasirpouri, “Preparation and characterization of a novel conductive nanocomposite blended with epoxy coating for antifouling and antibacterial applications”, Journal of Coatings Technology and Research, 10 (2013) 679-694. Link

6.3.5. A. Mostafaei, F. Nasirpouri, “Electrochemical study of epoxy coating containing novel conductive nanocomposite comprising polyaniline-ZnO nanorods on low carbon steel”, Corrosion Engineering Science and Technology, 48 (2013) 513-524. Link

6.3.4. A. Babaei-dehkordi, J. Moghaddam, A. Mostafaei, “An optimization study on the leaching of zinc cathode melting furnace slag in ammonium chloride by Taguchi design and synthesis of ZnO nanorods via precipitation methods”, Materials Research Bulletin, 48 (2013) 4235–4247. Link

6.3.3. A. Mostafaei, S. M. Peighambari, F. Nasirpouri, “Failure analysis of monel packing in atmospheric distillation tower under the service in the presence of corrosive gases”, Engineering Failure Analysis, 28 (2013) 241-251. Link

6.3.2. F. Daneshvar-Fatah, A. Mostafaei, R. Hosseinzadeh-Taghani, F. Nasirpouri, “Caustic corrosion in a Boiler waterside tube: Root Cause and mechanism”, Engineering Failure Analysis, 28 (2013) 69-77. Link

6.3.1. A. Mostafaei, A. Zolriasatein, “Synthesis and characterization of conducting polyaniline nanocomposites containing ZnO nanorods”, Progress in Natural Science: Materials International, 22 (2012) 273-280. Link