The dunker spot is defined as the low post.
Generally, the dunker should align on the left side of the floor to keep the right side open for drives, but they can work on both sides.
Dunkers may work both sides of the floor, but generally only when they move on drives or if they are a post scoring threat.
How does a player get to the dunker spot?
Our team starts out in 41 alignment with a designated dunker.
Through role definition, a player cuts from the perimeter while in 50 alignment and seals in the post, holding in the dunker spot for a period of time (seals can come off of basket cuts, pick and roll cuts, slips on screens, etc.).
Dunkers can post up, react to drives, and screen perimeter players.
Dunkers can stay in the post for the duration of the possession or can back screen their way out to the perimeter in the middle of a possession.
When the ball is passed to the post, the passer should Laker cut.
The rest of the offense should fill the vacated spots.
Passers can elect to bypass the Laker cut if the post has a distinct advantage on the pass.
The dunker can flash to the high post if it's open.
The dunker can back screen their way out of the post.
After the screen, they should pop.
The dunker can flare screen on the perimeter.
They read the cut and react (2nd cut) according to our screen rules.
The dunker can set pin screens along the lane lines for cutters.
The dunker should seal in the post after the screen.
If the ball is driven from either corner below the dunker, they should make an I-cut.
If the ball is driven from the strong side over the dunker, they should make a "short cut" to space the floor.
If the ball is driven from the slot, the dunker should "sneak" to the opposite side of the floor.
Another example of a sneak cut off a slot drive.
The only exception to the sneak cut on a slot drive is if the ball is driven away from the dunker.
In this case, the dunker holds.