1. 김도환 (1999.8) 강상판의 종리브와 강상판 용접 연결부의 응력분포 (Stress distribution of longitudinal rib to deck plate welded joint in orthotropic steel decks)
2. 김호배 (2000.2) 차량하중을 받는 장대레일 궤도의 온도 좌굴해석 (Thermal buckling analysis of continuos welded rail track under vehicle load)
3. 박진호 (2000.2) 풍하중을 받는 사장교에 대한 동조질량감쇠기의 설계 (Design of tuned mass damper for the cable-stayed bridge under windload)
4. 이동혁 (2000.2) 슬립을 고려한 강합성보의 장기거동분석 (Long-term behavior of composite continuous beams with flexible shear connectors)
5. 최항용 (2000.2) 강상판교 슬릿부의 피로 거동에 대한 다이아프램의 영향 (The effect of diaphram inside trough rib on fatigue behavior of slit in orthotropic steel decks)
6. 김동준 (2000.8) 그라운딩 처리에 따른 하중 비전달형 필렛용접부의 피로특성 (Effect of grinding on fatigue characteristics of non load-carrying Fillet welded joint)
7. 고상은 (2001.2) 프리스트레스트 강합성보의 장기거동해석 (Long-term behaviour of prestressed composite beams)
8. 김기남 (2001.2) 장스팬 파형강판 구조의 거동분석 및 단면력 해석에 관한 연구 ((A) study on the behaviour and force analysis of long-span corrugated steel plate arch structures)
9. 김태휘 (2001.2) 강상판교 현장연결부의 정적거동에 대한 연구 (A study of static behavior of field splice joint in orthotropic steel decks)
10. 이준구 (2001.2) 균열닫힘모델에 근거한 균열성장해석 (A crack growth analysis based on a crack closure model)
11. 유 훈 (2001.8) 강상자형교의 설계자동화 및 통합화를 위한 전후처리 시스템 개발 (A development of pre/post processor for automated and integrated design system of steel-box girder bridges)
12. 이동원 (2001.8) 국부좌굴을 고려한 직교 보강판의 좌굴강도해석 (Buckling strength analysis of orthogonally stiffened steel plates including local buckling)
13. 하정훈 2001.8) 면외 거셋형 고강도강(posten80)의 피로특성에 관한 연구 (A study on characteristics of fatigue in high strength steel(POSTEN80) with out-of plane gusset)
14. 김세권 (2002.2) 강상판교 현장연결부의 정적 및 피로거동 (Static and fatigue behavior of field splice joints in orthotropic steel decks)
15. 김용식 (2002.2) 유효접선탄성계수법을 이용한 사장교의 극한좌굴강도 해석 (Buckling analysis of cable-stayed steel bridges using effective tangent modulus method)
16. 오용술 (2002.2) 피로손상이 발생한 강철도교 바닥판 시스템의 응력평가와 보수 및 보강에 관한 연구 (A study on the stress estimation and repair of fatigue damage in the floor system of steel railway bridges)
17. 유호현 (2002.2) 장스팬 파형강판 구조물의 해석 및 설계방법에 관한 연구 (Development of design method for long-span corrugated plate structures)
18. 나옥빈 (2002.8) 콘크리트 충전강판의 해석 및 설계 (Structural characteristics of arch bridges using concrete-filled steel arch ribs)
19. 김현준 (2003.2) 유효접선탄성계수법을 이용한 강사장교의 좌굴해석 (Buckling analysis of cable-stayed steel bridges using effective tangent modulus method)
20. 나호성 (2003.2) 국부좌굴을 고려한 직교 보강판의 좌굴강도 (Buckling strength of orthogonally stiffened steel plates including local buckling)
21. 이기영 (2003.2) 에너지법을 이용한 사장교의 비선형 해석과 내하력 (Nonlinear analysis and load-carrying capacity of cable-stayed bridge using energy method)
22. 이순열 (2003.2) 강바닥판 횡리브 상세브의 정적 및 피로거동에 대한 연구 ((A) study of static and fatigue behavior of crossbeam details in orthotropic steel decks)
23. 윤희두 (2003.8) 콘크리트 충전 파형강판 구조물의 시공단계별 단면력 해석 (Evaluation of member forces in enased-concrete corrugated steel plate structures during construction stages)
24. 안우성 (2004.2) 시간이해해석을 이용한 강철도교 세로보의 피로수명예측 (Prediction of the Fatigue Life for Stringers of Steel Railway Bridges Using Time History Analysis)
25. 최진우 (2004.2) U형 보강재로 보강된 직교 보강판의 국부좌굴 강도 (Local Buckling Strength of Orthogonally Stiffened Steel Plate With U-shaped Stiffeners)
26. 김남기 (2004.8) 외부긴장재로 보강된 강합성보의 휨 거동 해석 (Anaysis for flexural behavior of the externally prestressed composite beams)
27. 홍석주 (2004.8) 강사장교 거더와 주탑의 내하율 산정에 관한 연구 (Evaluation of Rating Factor in Girders and Towers of Steel Cable-Stayed Bridges)
28. 공금배 (2005.2) 강바닥판 횡리브와 종리브 연결부의 피로 거동에 관한 연구 (Fatigue behaviour of U-rib and crossbeam joint in orthotropic steel decks)
29. 김대성 (2005.2) 고강도강 교량부재의 설계좌굴강도에 관한 연구 ((A) study on design buckling strength of bridge members made of high strengh steel)
30. 박응우 (2005.2) 원통형 정착구를 사용하고 외부 긴장재로 보강된 강재보의 거동 (Behavior of steel beam strengthened with external tendons using cylindrical anchorage)
31. 신민수 (2005.2) 고강도강 적용시 교량의 합리화 설계의 가능성 (Possibility of rational design of bridges in using high strength steel)
32. 이승재 (2005.2) 초장대 강사장교의 설계를 위한 매개변수 해석 (Parametric Studies for Design of Super Long Span Cable-Stayed Bridges)
33. 이자호 (2005.2) 혼합모드 하중하에서의 강바닥판의 파괴조건 및 피로균열진전거동 (Fracture criterion and fatigue crack growth behavior of orthotropic deck plates under mixed mode loading)
34. 하동현 (2005.2) 비탄성 좌굴해석을 적용한 사장교의 내하력 평가 (Evaluation of load-carrying capacity of cable-stayed bridges using inelastic buckling analysis)
35. 전호탁 (2005.8) 외부긴장재로 보강된 연속 강합성보의 휨거동 해석 (Analysis of Flexural Behavior for Continuous Compostie Girders by External Post-Tensioning)
36. 최문성 (2005.8) 파형강판 구조물의 이음부 압축강도와 휨강도에 대한 평가 (Evaluation of Compressive Seam Strength and Flexural Strength of Corrugated Structural Plates)
37. 강원혁 (2006.2) 외부긴장을 이용한 연속 강합성교의 보강에 관한 연구 (Strengthening of contimuous composite bridges by external post-tensioning)
38. 박진웅 (2006.2) 하중저항계수율을 이용한 강합성교량의 내하율 산정에 관한 연구 (Evaluation of rating factor in steel girder bridges by using LRFR)
39. 유동민 (2006.2) 외부 긴장재를 이용한 기존 강합성교량의 내하력 향상에 관한 연구 ((A) study on the improvement of load carrying capacity for existing steel-composite bridges with external tendons)
40. 장이석 (2006.2) 강사장교 내하율 평가 (Evaluation of rating factor in steel cable-stayed bridges)
41. 조용우 (2006.2) 장지간 지중강판 박스구조물의 휨모멘트 계수식 제안 (Coefficients of moment equations for long-span soil-metal box structures)
42. 이범수 (2006.8) 하중저항계수평가법을 이용한 강사장교 거더와 주탑의 내하율 산정에 관한 연구 (Evaluation of Rating Factor in Girders and Towers of Steel Cable-Stayed Bridges using Load and Resistance Factor Rating)
43. 김은지 (2007.2) 외부 긴장재를 이용한 연속 강합성교의 내하력 향상에 관한 연구 (A study on the improvement of load cerrying capacity for continuous composite bridges with external tendons)
44. 이종연 (2007.2) 외부 긴장재를 이용한 강합성교의 보강 설계에 관한 연구 (A Study on Strengthening Method of Steel Composite Bridges using External Post-Tensioning)
45. 정구상 (2007.2) 외부 긴장재를 이용한 강합성보의 보강에 관한 실험적 연구 (An Experimental Study on the Strengthening of Steel-Composite Beams with External Tendons)
46. 문은경 (2007.8) 장지간 지중강판 박스 구조물의 이방성 구조해석에 관한 연구 (A Study of Anisotropic Analysis for Long-Span Soil-Metal Box Structures)
47. 신재인 (2007.8) 수정된 탄성좌굴해석을 적용한 강-프레임 부재의 유효좌굴길이 계수선정 (Evaluation of effective length factors for steel-frames using modified elastic buckling analysis)
48. 고정훈 (2008.2) 내진설계 스펙트럼에 부합하는 목표 PSD함수 작성 (Generation of Target Power Spectral Density Function using design response spectrum)
49. 김성연 (2008.2) 수정된 시스템좌굴해석을 적용한 강-프레임 부재의 비탄성 유효좌굴길이계수 산정 (Evaluation of Inelastic Effective Length Factors for Multi-story Steel Frames Using Modified System Buckling Analysis)
50. 이진호 (2008.2) 외부 긴장재로 보강된 강합성교의 횡-비틀림 좌굴 (Lateral Torsional Buckling of Steel-concrete Composite Bridges Strengthened by Exteral Tendons)
51. 최덕일 (2008.2) 외부 긴장재로 보강된 연속 강합성교의 증가 프리스트레스력을 사용한 내하율 산정 (Determination of Rating Factor with Increment of Tendon Force for Continuous Steel-concrete Composite Bridges Strengthened by External Tendons)
52. 최우람 (2008.2) 장지간 파형강판 박스형 구조물의 3차원 구조해석모델 개발 (Development of Three Dimensional Structure Model for Long-Span Corrugated Box Structures)
53. 김성원 (2009.2) 분절 채널형 하로교의 해석모델 개발 (Development of Analysis Model of Segmental Channel Through Bridges)
54. 이광원 (2009.2) U-채널형 교량의 측보에 대한 차량충돌 시뮬레이션 (Impact Simulation of Vehicle Collision with Edge Girders of U-Channel Bridge)
55. 이윤석 (2009.2) 가상축력을 적용한 3차원 부재의 유효좌굴길이계수 산정 (Evaluation of Effective Length Factors for 3-D Frames Using Modified Fictitious Axial Force)
56. 이철규 (2009.2) 조립식 프리캐스트 U-형 채널교량의 폭원적용범위 확장에 대한 연구 (Study on Expanding Applicable Range of Width in Precast U-Channel Bridge)
57. 황규태 (2009.8) 파형강판 구조물의 최적단면 설계에 관한 연구 (Study on optimal design of corrugated steel plate structures)
58. 송수호 (2010.2) 가상축력계수를 적용한 시스템좌굴해석으로 강-프레임 부재의 비탄성 유효좌굴길이계수 산정 (Evaluation of inelastic effective length factors for steel frames by system buckling analysis using virtual load factor)
59. 김승경 (2011.2) 사장현수교 초기형상에 관한 연구 (Study on initial shape finding of cable-stayed suspension bridges)
60. 김용한 (2011.2) 캔틸레버형 압전 에너지 하비스터를 이용한 교량 무선 계측 센서의 전원 공급 (Power supply of wireless monitoring sensor in bridges using cantilever piezoelectric energy harvester)
61. 김 흠 (2011.2) 처짐이론을 이용한 자정식 현수교의 해석 (Analysis of self-anchored suspension bridges using deflection theory)
62. 나준수 (2011.2) 세그멘탈 채널형 콘크리트 하로교의 긴장재 긴장순서에 따른 비틀림 안정성과 정적 및 동적 거동 분석 연구 (Torsional stability during tension stages and static and dynamic behavior of segmental channel concrete through bridges)
63. 이지엽 (2011.2) 등가 케이블 강성을 이용한 다경간 현수교의 해석 (Analysis of multi-span suspension bridges using equivalent cable stiffness)
64. 이효석 (2011.2) 케이블 교량에 적용 가능한 압전 에너지 하비스터 개발 (Development of oiezoelectric energy harvester for cable-supperted bridges)
65. 김두봉 (2011.8) 설계활하중을 고려한 사장교 거동에 관한 연구 ((A) study on the behavior of cable-stayed bridges for design live load)
66. 김우경 (2012.2) 부가질량의 영향을 받는 해상풍력발전 구조물의 지진해석에 관한 연구 ((A) study of the seismic analysis of offshore wind turbine structure considering added mass)
67. 김철홍 (2012.2) 단결정 압전 세라믹을 이용한 고효율 진동형 에너지 하비스터 제작 및 성능 실험 (Production and performance experiment of high efficient vibration energy harvesters using single crystal ceramic)
68. 나용현 (2012.2) 진동-충격 영향을 고려한 켄틸레버형 에너지 하비스터의 비선형 동특성 (Nonlinear dynamic characteristics of cantilever-type energy harvester considering vibro-impact effect)
69. 안기철 (2012.2) 교량-열차 상호작용을 고려한 강합성 상자형교 및 I형 거더교의 사용성 및 지진시 주행안전성에 대한 연구 ((A) study on serviceability and driving safety of steel box girder bridge and I-girder bridge considering bridge-train interaction)
70. 최윤호 (2012.2) 강구조물을 이용한 해상풍력발전 구조물의 진동 및 내진해석에 관한 연구 ((A) study on vibration and seismic analyses of offshore wind turbine steel structures)
71. 권용민 (2012.8) 5경간 현수교의 극한거동 해석 (Analysis of umtimate behaviors of five span suspension bridge)
72. 김철민 (2012.8) 해상 쟈켓구조물 극한상태 분석에 관한 연구 ((A) study on the ultimate state analysis of offshore jacket structure)
73. 신동현 (2012.8) 차량하중 재하위치를 고려한 현수교의 신뢰성 해석 (Reliability analysis of suspension bridge under vehicle load location)
74. 고영찬 (2013.2) 감소된 단면을 가진 해저 파이프라인의 좌굴 거동 (Buckling Behavior of Subsea Pipelines of Reduced Cross Section)
75. 김혜인 (2013.2) 도해법을 이용한 사장교의 초기평형상태 해석 (Analysis of Initial Equilibrium State for Cable-Stayed Bridged Using Graphic Statics)
76. 정회범 (2013.2) 병렬로 연결된 압전 하비스팅을 이용한 무선 센서의 구조물 계측 (Structural Monitoring with Wireless Sensor using Parallel Connected Piezoelectric Harvesting)
77. 지동현 (2013.2) 보강재를 적용한 고강도강재의 극한거동에 관한 연구 (Study on the ultimate behavior of high performance steel for bridge with stiffeners)
78. 김동근 (2013.8) 밀폐된 콘크리트 튜브의 긴장력 변화에 따른 기밀성 평가 (Air-tightness Evaluation of Sealed Concrete Tube due to a Change of Pre-stressing Force)
79. 이상목 (2014.2) A Study on Applicability of Inelastic Buckling Analysis for Estimation of Ultimate Strength of Steel Cable-Stayed Suspension Bridges (강사장현수교의 극한강도 평가를 위한 비탄성 좌굴해석의 적용성에 관한 연구)
80. 전용진 (2016.2) A Study on the Optimization of Gauge Expansion and Tongue Rail Profile for Improvement of Running Performance of High-Speed Railway Turnouts (고속철도용 분기기의 주행성능 향상을 위한 궤간 및 텅레일 단면 최적화)
81. 민경인 (2016.8) Interaction Equations for Composite I-Girders Under Combined Axial Compression and Positive Moment (조합된 압축력과 정모멘트를 받는 강합성 I-거더의 상관식)
82. 한종훈 (2016.8) A Study on Joint Strength of Reinforcing Plate for Corrugated Steel Plate (파형강판 보강판 이음부 강도에 관한 연구)
83. 김민주 (2018.2) Optimum Design of Simply Supported Plate Girder Bridge (단경간 플레이트 거더교의 최적단면설계)
84. 조찬우 (2019.2) Application of Rolled H-Shape Steel Beam for Short Span Bridges (단경간 교량을 위한 압연 H형강의 적용)
85. 박선규 (2021.8) Dynamic stability of a single span high-speed railway bridge with seismic and moving loads (지진과 이동하중을 받는 단경간 고속 철도교량의 동적 안정성)
86. 최인용 (2022.2) Evaluation of Structural Soundness Through Mock-up during Fill-up Stages for a Near-surface Disposal Facility Vault (표층처분시설 처분고의 목업테스트를 통한 구조 건성성 평가)
87. 이혁진 (2024.2) Structural safety assessment of remote-automated formwork system using time-history analysis (원격·자동화 거푸집 시스템의 시간이력 해석에 따른 구조적 안정성 분석)
88. 김수호(2026.2) 고강도 철근콘크리트 추진관의 외압시험 및 FEM 기반 안전율 평가와 매설조건 적용성에 관한 연구 (External Pressure Testing and FEM-Based Safety Factor Evaluation of High-Strength Reinforced Concrete Jacking Pipes: Implications for Buried Installation Condition)