Publications

以下論文均以國立成功大學教授名義發表 (2015.2起)

111. Y. W. Tseng, F. Y. Hung* and T. S. Lui. Microstructure, Mechanical and High-Temperature Electrical Properties of Cyanide-Free Au-Coated Ag Wire (ACA). Materials Transactions, 56(3), 441-444, 2015. doi:10.2320/matertrans.M2014383

112. T. H. Liu, F. Y. Hung*, T. S. Lui and K. J. Chen. Preparation of Cu2Sn3S7 Thin-Film Using a Three-Step Bake-Sulfurization-Sintering Process and Film Characterization. Journal of Nanomaterials, 969783, 2015. doi:10.1155/2015/969783

113. Y. W. Tseng, F. Y. Hung* and T. S. Lui. Microstructure, Tensile and Electrical Properties of Gold-Coated Silver Bonding Wire. Microelectronics Reliability, 55(3-4), 608-612, 2015. doi:10.1016/j.microrel.2015.01.008

114. C. H. Wu, F. Y. Hung*, T. S. Lui and L. H. Chen. Electrochemical Performance of Ag Doped Al0.6Si0.4/Al Thin Film Anodes. Surface Engineering, 31(3), 173-178, 2015. doi:10.1179/1743294414Y.0000000314

115. Y. W. Tseng, F. Y. Hung*, T. S. Lui and S. J. Chang. Structural and Raman Properties of Silver-Doped ZnO Nanorod Arrays using Electrically Induced Crystallization Process. Materials Research Bulletin, 64, 274-278, 2015. doi:10.1016/j.materresbull.2014.12.053

116. D. J. Lin, F. Y. Hung*, T. S. Lui and M. L. Yeh. Heat Treatment Mechanism and Biodegradable Characteristics of ZAX1330 Mg Alloy. Materials Science & Engineering C-Materials for Biological Applications, 51, 300-308, 2015. doi:10.1016/j.msec.2015.03.004

117. Y. W. Tseng, F. Y. Hung*, T. S. Lui, M. Y. Chen and H. W. Hsueh. Effect of Annealing on the Microstructure and Bonding Interface Properties of Ag-2Pd Alloy Wire. Microelectronics Reliability, 55(8), 1256-1261, 2015. doi:10.1016/j.microrel.2015.05.012

118. D. J. Lin, F. Y. Hung*, M. L. Yeh and T. S. Lui. Microstructure-Modified Biodegradable Magnesium Alloy for Promoting Cytocompatibility and Wound Healing in Vitro. Journal of Materials Science-Materials in Medicine, 26(10), 248, 2015. doi:10.1007/s10856-015-5572-6

119. K. J. Chen, F. Y. Hung*, T. S. Lui, L. H. Chen and Y. W. Chen. A Study of Green Sn-xZn Photovoltaic Ribbons for Solar Cell Application. Solar Energy Materials and Solar Cells, 143, 561-566, 2015. doi:10.1016/j.solmat.2015.08.007

120. Y. W. Tseng, F. Y. Hung* and T. S. Lui. Thermoelectric Mechanism and Interface Characteristics of Cyanide-Free Nanogold-Coated Silver Wire. Journal of Electronic Materials, 45(1), 624-630, 2016. doi:10.1007/s11664-015-4161-2

121. D. J. Lin, F. Y. Hung*, S. Jakfar and M. L. Yeh. Tailored Coating Chemistry and Interfacial Properties for Construction of Bioactive Ceramic Coatings on Magnesium Biomaterial. Materials & Design, 89, 235-244, 2016. doi:10.1016/j.matdes.2015.09.144

122. C. Y. Chen, F. Y. Hung*, T. S. Lui and L. H. Chen. Microstructures and Mechanical Properties of Austempering SUS440 Steel Thin Plates. Metals, 6(2), 11, 35, 2016. doi:10.3390/met6020035

123. C. W. Lin, F. Y. Hung*, T. S. Lui and L. H. Chen. Structural Characteristics and Particle Erosion Resistance of SIMA-Processed Al-Mg-Si Alloy. Materials Transactions, 57(2), 135-142, 2016. doi:10.2320/matertrans.M2015300

124. C. W. Lin, F. Y. Hung*, T. S. Lui and L. H. Chen. High-Temperature Deformation Resistance and Forming Behavior of Two-Step SIMA-Processed 6066 Alloy. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 659, 143-157, 2016. doi:10.1016/j.msea.2016.02.041

125. C. W. Lin, F. Y. Hung*, T. S. Lui and L. H. Chen. Microstructure Evolution and High-Temperature Compressibility of Modified Two-Step Strain-Induced Melt Activation-Processed Al-Mg-Si Aluminum Alloy. Metals, 6(5), 113, 2016. doi:10.3390/met6050113

126. C. W. Lin, F. Y. Hung* and T. S. Lui. High-Temperature Compressive Resistance and Mechanical Properties Improvement of Strain-Induced Melt Activation-Processed Al-Mg-Si Aluminum Alloy. Metals, 6(8), 183, 2016. doi:10.3390/met6080183

127. K. J. Chen, F. Y. Hung*, T. S. Lui and C. H. Tseng. Decrease in Hydrogen Embrittlement Susceptibility of 10B21 Screws by Bake Aging. Metals, 6(9), 211, 2016. doi:10.3390/met6090211

128. H. C. Chen, F. Y. Hung*, T. S. Lui and L. H. Chen. Effects of Friction Stir Process and Stabilization Heat Treatment on Tensile Characteristics and Punch-Shear Properties of AZ61 Alloy. Materials Transactions, 58(1), 6-10, 2017. doi:10.2320/matertrans.M2015391

129. Y. T. Chen, F. Y. Hung*, T. S. Lui and J. Z. Hong. Microstructures and Charge-Discharging Properties of Selective Laser Sintering Applied to the Anode of Magnesium Matrix. Materials Transactions, 58(4), 525-529, 2017. doi:10.2320/matertrans.M2016415

130. H. W. Hsueh, F. Y. Hung* and T. S. Lui. A Study on Electromigration-Inducing Intergranular Fracture of Fine Silver Alloy Wires. Applied Physics Letters, 110(3), 031902, 2017. doi:10.1063/1.4974154

131. D. J. Lin, F. Y. Hung*, M. L. Yeh, H. P. Lee and T. S. Lui. Correlation between Anti-Corrosion Performance and Optical Reflectance of Nano Fluoride Film on Biodegradable Mg-Zn-Zr Alloy: a Non-Destructive Evaluation Approach. International Journal of Electrochemical Science, 12(5), 3614-3634, 2017. doi:10.20964/2017.05.24

132. F. Y. Hung*, T. S. Lui, K. M. Chu and Y. W. Tseng. Aluminium Wires Have the Free Air Balls (FABs): Electronic Flame-Off, Fracture Strength, Electrical Properties, and Bonding Characteristics of Nano Zn Film Al-Si Bonding Wires. Metals, 7(5), 152, 2017. doi:10.3390/met7050152

133. C. Y. Chang, F. Y. Hung* and T. S. Lui. Mechanical and Electrical Properties of Palladium-Coated Copper Wires with Flash Gold. Journal of Electronic Materials, 46(7), 4384-4391, 2017. doi:10.1007/s11664-017-5355-6

134. Y. L. Chang, F. Y. Hung* and T. S. Lui*. Enhancing the Tensile Yield Strength of A6082 Aluminum Alloy with Rapid Heat Solutionizing. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 702, 438-445, 2017. doi:10.1016/j.msea.2017.07.021

135. D. J. Lin, F. Y. Hung*, M. L. Yeh, H. P. Lee and T. S. Lui. Development of a Novel Micro-Textured Surface using Duplex Surface Modification for Biomedical Mg Alloy Applications. Materials Letters, 206, 9-12, 2017. doi:10.1016/j.matlet.2017.06.047

136. D. J. Lin, F. Y. Hung, H. J. Liu and M. L. Yeh*. Dynamic Corrosion and Material Characteristics of Mg-Zn-Zr Mini-Tubes: The Influence of Microstructures and Extrusion Parameters. Advanced Engineering Materials, 19(11), 1700159, 2017. doi:10.1002/adem.201700159

137. D. J. Lin, F. Y. Hung*, H. P. Lee and M. L. Yeh*. Development of a Novel Degradation-Controlled Magnesium-Based Regeneration Membrane for Future Guided Bone Regeneration (GBR) Therapy. Metals, 7(11), 481, 2017. doi:10.3390/met7110481

138. C. W. Lin, F. Y. Hung* and T. S. Lui. Microstructure Evolution and Microstructural Characteristics of Al-Mg-Si Aluminum Alloys Fabricated by a Modified Strain-Induced Melting Activation Process. Metals, 8(1), 3, 2018. doi:10.3390/met8010003

139. Y. T. Chen, F. Y. Hung*, T. S. Lui and H. P. Tan. Microstructure and High Temperature Charge-Discharge Characteristics of 3D Additive Manufacturing Produced Mg-Ni Anode. Materials Transactions, 59(4), 685-689, 2018. doi:10.2320/matertrans.M2017348

140. Y. T. Chen, F. Y. Hung* and T. S. Lui. The Charge-Discharge Characteristics and Diffusion Mechanism of Ti-Si-Al Thin Film Anode using an Electrically Induced Crystallization Process. Journal of Applied Physics, 123(14), 145303, 2018. doi:10.1063/1.5016474

141. K. J. Chen, F. Y. Hung*, T. S. Lui and C. H. Tseng, Effects of Tempered Microstructure and Hydrogen Concentration on Hydrogen-Induced Embrittlement Susceptibility of 10B21 Screws at Low Temperature, Materials Transactions, 59(7), 1124-1129, 2018. doi:10.2320/matertrans.M2017342

142. Y. L. Chang, F. Y. Hung* and T. S. Lui, Enhancement of the Young's Modulus through Infrared Heat Treatment: A Study of the Microstructure and the Mass Effect of Real Body 6082 Aluminum Forgings, Metals, 8(4), 239, 2018. doi:10.3390/met8040239

143. Y. L. Chang, F. Y. Hung* and T. S. Lui, Enhancement of Mechanical Properties of Hot-Forged 6082 Suspension Parts via Rapid IR Heat Treatment, Metals, 8(7), 501, 2018. doi:10.3390/met8070501

144. C. W. Lin, F. Y. Hung*, T. S. Lui and D. J. Huang, Study on Characteristics of Interfacial Microstructure and Electrical Current Mechanism in Sn-xZn/Al Photovoltaic Modules, Solar Energy, 170, 840-848, 2018. doi:10.1016/j.solener.2018.06.002

145. M. H. Ku, F. Y. Hung*, T. S. Lui and J. J. Lai, Enhanced Formability and Accelerated Precipitation Behavior of 7075 Al Alloy Extruded Rod by High Temperature Aging, Metals, 8(8), 648, 2018. doi:10.3390/met8080648

146. K. J. Chen, F. Y. Hung*, T. S. Lui and W. Y. Lin, Effects of Static Heat and Dynamic Current on Al/Zn∙Cu/Sn Solder/Ag Interfaces of Sn Photovoltaic Al-Ribbon Modules, Materials, 11(9), 1642, 2018. doi:10.3390/ma11091642

147. K. J. Chen, F. Y. Hung*, T. S. Lui and L. Hsu, Studies of Interfacial Microstructures and Series Resistance on Electroplated and Hot-Dipped Sn-xCu Photovoltaic Modules, Journal of Electronic Materials, 47(10), 6028-6035, 2018. doi:10.1007/s11664-018-6483-3

148. Y. L. Chang, F. Y. Hung* and T. S. Lui, Study of Microstructure and Tensile Properties of Infrared-Heat-Treated Cast-Forged 6082 Aluminum Alloy, Journal of Materials Research and Technology, 8(1), 173-179, 2019. doi:10.1016/j.jmrt.2017.10.004

149. K. J. Chen, F. Y. Hung, T. S. Lui and Y. R. Shih, Wear Inducing Phase Transformation of Plasma Transfer Arc Coated Tools During Friction Stir Welding with Al Alloy, Journal of Engineering, 2019, 2019. doi:10.1155/2019/6413608

150. M. H. Ku, F. Y. Hung and T. S. Lui*, Embrittlement Due to Excess Heat Input into Friction Stir Processed 7075 Alloy, Materials, 12(2), 227, 2019. doi:10.3390/ma12020227

151. C. W. Lin, K. J. Chen, F. Y. Hung*, T. S. Lui and H. P. Chen, Impact of Solid-Solution Treatment on Microstructural Characteristics and Formability of Rotary-Swaged 2024 Alloy Tubes, Journal of Materials Research and Technology, 8(3), 3137-3148, 2019. doi:10.1016/j.jmrt.2018.12.029

152. M. H. Ku, F. Y. Hung and T. S. Lui*, Examination of the High Tensile Ductility Improvement in an as-Solutionized AA7075 Alloy with the Aid of a Friction Stir Process, Metals, 9(2), 196, 2019. doi:10.3390/met9020196

153. M. H. Ku, F. Y. Hung* and T. S. Lui, The Effect of Hyper-Rotation on the Weibull Distribution of Tensile Properties in a Friction Stirred AA7075 Aluminum Alloy, Materials Chemistry and Physics, 226, 290-295, 2019. doi:10.1016/j.matchemphys.2018.12.085

154. J. R. Zhao, F. Y. Hung*, T. S. Lui and Y. L. Wu, The Relationship of Fracture Mechanism between High Temperature Tensile Mechanical Properties and Particle Erosion Resistance of Selective Laser Melting Ti-6Al-4V Alloy, Metals, 9(5), 501, 2019. doi:10.3390/met9050501

155. J. R. Zhao, F. Y. Hung* and T. S. Lui, Particle Erosion Induced Phase Transformation of Different Matrix Microstructures of Powder Bed Fusion Ti-6Al-4V Alloy Flakes, Metals, 9(7), 730, 2019. doi:10.3390/met9070730

156. K. J. Chen, F. Y. Hung* and C. Y. Chang, A Study of the Sulfidation Behavior on Palladium-Coated Copper Wire with a Flash-Gold Layer (PCA) after Wire Bonding, Electronics, 8(7), 792, 2019. doi:10.3390/electronics8070792

157. C. W. Lin, K. J. Chen, F. Y. Hung, T. S. Lui and H. P. Chen, Impact of Solid-Solution Treatment on Microstructural Characteristics and Formability of Rotary-Swaged 2024 Alloy Tubes, Journal of Materials Research and Technology, 8(3), 3137-3148, 2019. doi:10.1016/j.jmrt.2018.12.029

158. Y. T. Chen, F. Y. Hung* and J. C. Syu, Biodegradable Implantation Material: Mechanical Properties and Surface Corrosion Mechanism of Mg-1Ca-0.5Zr Alloy, Metals, 9(8), 857, 2019. doi:10.3390/met9080857

159. Y. H. Wu, F. Y. Hung*, T. S. Lui and K. J. Chen, Study of Wire Bonding Reliability of Ag-Pd-Au Alloy Wire with Flash-Gold after Chlorination and Sulfidation, Microelectronics Reliability, 99, 186-196, 2019. doi:10.1016/j.microrel.2019.05.014

160. C. C. Ho, K. J. Chen, F. Y. Hung* and T. S. Lui, Study of Electrical Fatigue Test in Gold-Coated Siliver-4 Wt.% Palladium Bonding Wire, Microelectronics Reliability, 103, 113502, 2019. doi:10.1016/j.microrel.2019.113502

161. K. J. Chen, F. Y. Hung*, T. S. Lui and L. Hsu, Low Conductivity Decay of Sn-0.7Cu-0.2Zn Photovoltaic Ribbons for Solar Cell Application, Micromachines, 10(8), 550, 2019. doi:10.3390/mi10080550

162. T. H. Liu, F. Y. Hung, T. Chien and K. J. Chen, Opto-Electromagnetic Properties of Carbon-Doped Zinc-Oxide Prepared using Electrically Induced Crystallization and Ion Implantation Process for Gas Sensor Application, Journal of Materials Science: Materials in Electronics, 31(1), 144-153, 2020. doi:10.1007/s10854-019-02325-6

163. Y. T. Chen, F. Y. Hung, Y. L. Lin and C. Y. Lin, Biodegradation ZK50 Magnesium Alloy Compression Screws: Mechanical Properties, Biodegradable Characteristics and Implant Test, Journal of Orthopaedic Science, 25(6), 1107-1115, 2020. doi:10.1016/j.jos.2020.01.018

164. J. R. Zhao, F. Y. Hung and T. S. Lui, Erosion Resistance and Particle Erosion-Induced Tensile Embrittlement of 3d-Selective Laser Melting Inconel 718 Superalloy, Metals, 10(1), 21, 2020. doi:10.3390/met10010021

165. Y. L. Chang, F. Y. Hung and T. S. Lui, A New Infrared Heat Treatment on Hot Forging 7075 Aluminum Alloy: Microstructure and Mechanical Properties, Materials, 13(5), 1177, 2020. doi:10.3390/ma13051177

166. J. R. Zhao, F. Y. Hung and T. S. Lui, Microstructure and Tensile Fracture Behavior of Three-Stage Heat Treated Inconel 718 Alloy Produced via Laser Powder Bed Fusion Process, Journal of Materials Research and Technology, 9(3), 3357-3367, 2020. doi:10.1016/j.jmrt.2020.01.030

167. B. D. Wu and F. Y. Hung, Wedge Bonding Technologies: Microstructure, Mechanical Properties and Electrical Properties of Fine Al–Zn–Si Alloy Wire, Journal of Materials Science: Materials in Electronics, 31(12), 9270-9283, 2020. doi:10.1007/s10854-020-03467-8

168. K. J. Chen, F. Y. Hung, T. S. Lui and C. L. Tsai, Improving the Applicability of Wear-Resistant Al–10si–0.5 Mg Alloy Obtained through Selective Laser Melting with T6 Treatment in High-Temperature, and High-Wear Environments, Journal of Materials Research and Technology, 9(4), 9242-9252, 2020. doi:10.1016/j.jmrt.2020.06.078

169. T. H. Liu, F. Y. Hung, C. H. Chen and K. J. Chen, Microstructure, Optical, Electrical, and Magnetic Properties of ZnO/CuO Thin Films Prepared using Two-Stage Magnetron Sputtering and Diffusion Doping Process, Journal of Materials Science: Materials in Electronics, 31(5), 4017-4026, 2020. doi:10.1007/s10854-020-02949-z

170. T. H. Liu, F. Y. Hung and K. J. Chen, Interface Behavior and Electrical Properties of Zn–Sn–Cu (Ctz) Stacking Layer Films with Thermal Diffusion and Electrically Induced Crystallization, Journal of Materials Research and Technology, 9(6), 15547-15554, 2020. doi:10.1016/j.jmrt.2020.10.106

171. K. J. Chen, Y. H. Fang and F. Y. Hung, Novel Photovoltaic Ribbon Technology: Interfacial Behavior of In–50sn Alloy Ribbon without Metal Matrix under Electrothermal Effects and Chlorine Corrosion, Materials Today Communications, 26, 101865, 2021. doi:10.1016/j.mtcomm.2020.101865

172. T. H. Liu, F. Y. Hung, C. H. Chen and K. J. Chen, Optical, Microstructure, and Electromagnetic Properties of (1− X) ZnO− X CuO Powders Prepared Using Two-Stage Sintering and Direct Synthesis, JOM, 73(3), 815-822, 2021. doi:10.1007/s11837-020-04532-7

173. J. R. Zhao, F. Y. Hung and B. J. Chen, Effects of Heat Treatment on a Novel Continuous Casting Direct Rolling 6056 Aluminum Alloy: Cold Rolling Characteristics and Tensile Fracture Properties, Journal of Materials Research and Technology, 11, 535-547, 2021. doi:10.1016/j.jmrt.2021.01.037

174. J. R. Zhao, F. Y. Hung, C. S. Lu and I. C. Lai, Comparison of Laser Powder Bed Fusion and Cast Inconel 713 Alloy in Terms of Their Microstructure, Mechanical Properties, and Fatigue Life, Advanced Engineering Materials, 2001366, 2021. doi:10.1002/adem.202001366

175. K. C. Chang, J. R. Zhao and F. Y. Hung, Effects of Hyper-High-Temperature Solid-Solution Treatment on Microstructure Evolution and Nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc Alloy Manufactured by Selective Laser Melting, Journal of Alloys and Compounds, 160781, 2021. doi:10.1016/j.jallcom.2021.160781

176. B. D. Wu and F. Y. Hung, Effect of Electrification and Chlorination on the Microstructure and Electrical Properties of Fine Al Wires, Microelectronics Reliability, 124, 114234, 2021. doi:10.1016/j.microrel.2021.114234

177. K. C. Chang, J. R. Zhao and F. Y. Hung, Effects of Hyper-High-Temperature Solid-Solution Treatment on Microstructure Evolution and Nanoprecipitation of the Al-Ni-Cu-Fe-Zr-Sc Alloy Manufactured by Selective Laser Melting, Journal of Alloys and Compounds, 883, 160781, 2021. doi:10.1016/j.jallcom.2021.160781

178. B. C. Huang and F. Y. Hung, Al2O3 Particle Erosion Induced Phase Transformation: Structure, Mechanical Property, and Impact Toughness of an SLM Al-10si-Mg Alloy, Nanomaterials, 11(8), 2131, 2021. doi:10.3390/nano11082131

179. L. Y. Lee, K. C. Chang, J. R. Zhao and F. Y. Hung, The Effects of Al3 (Sc, Zr) Precipitation Phase on Selective Laser Melting Al-Mg-Sc-Zr Alloy: Microstructure, Mechanical Properties and Fatigue Resistance, 2021. doi:10.21203/rs.3.rs-421669/v1