97學年度
王文龍 Wang, Wen-Long
奈米科技暨微系統工程研究所
通電機制對ZnO-In/Ag-ZnO薄膜顯微組織與光電特性之影響
An Investigation on Microstructure and Opto-electrical Characteristics of ZnO-In/Ag-ZnO Thin Films Using the Electrical Current Mechanism
98學年度
陳冠仁 博士 Chen, Kuan-Jen, Ph.D
微電子工程研究所 (共同指導)
溶膠-凝膠法合成摻雜氧化鋅奈米線薄膜之結晶機制與光電特性研究
The crystallized mechanism and optoelectronic properties of sol-gel synthesized doped ZnO nanowires thin film
陳彥廷 Chen, Yen-Ting
奈米科技暨微系統工程研究所
InGaZnO薄膜組織與界面機制及光電特性研究
Microstructure, Interface Crystallized Mechanism and Optoelectronic Characteristics of InGaZnO Thin Films
薛皓文 Hsueh, Hao-Wen
材料科學及工程學系 (共同指導)
退火溫度對23μm銀導線打線接合之再結晶及拉伸性質效應探討
Effect of Annealing Temperature on Recrystallization and Tensile Properties of Wire Bonding 23μm Silver Wires
99學年度
胡展碩 博士 Hu, Zhan-Shuo, Ph.D
光電科學與工程研究所
奈米銀基系統特性及應用於氧化鋅和氮化鎵奈米材料之研究
Characteristization of nano metal silver-based system andapplied in ZnO and GaN nanomaterials
曾譯葦 Tseng, Yi-Wei
奈米科技暨微系統工程研究所
低溫氧化鋅奈米結構通電固態摻雜機制與光電特性研究
Electrical Induced Crystallization Mechanism and Optoelectronic Properties of ZnO Nanostructures using Low-Temperature Solution Method
蕭人瑄 Hsiao, Jen-Hsuan
奈米科技暨微系統工程研究所
鋰離子二次電池鎂-鎳-碳負極材料微觀組織與充放電特性研究
A Study on Microstructures and Charge-Discharge Characteristics of Mg-Ni-C Anode Materials for Lithium-Ion Rechargeable Batteries
100學年度
薛漢鼎 博士 Hsueh, Han-Ting, Ph.D
奈米科技暨微系統工程研究所
矽、氧化銅及氧化鋅奈米線之成長及奈米線感測元件製作
Growth of Si, CuO and ZnO nanowires and the fabrication of nanowire sensors
劉泰翔 Liu, Tai-Hsiang
奈米科技暨微系統工程研究所
Cu2ZnSnS4xSe4(1-x) 粉末合成機制及光電特性和熱蒸鍍界面應用研究
The Synthesis Mechanism, Optoelectronic Properties and Thermal-evaporated Interface Characteristic of Cu2ZnSnS4xSe4(1-x) Powder
101學年度
蕭彤宣 Hsiao, Tung-Hsuan
銀添加對鋰離子二次電池鎂合金負極材料充放電特性與界面分析之研究
Effect of Adding Ag on Charge-Discharge Characteristics and Interface Analysis of Mg Alloy Anode Materials for Lithium-Ion Rechargeable Batteries
楊凱元 Yang, Kai-Yuan
鋁鎵表面被覆改質錳酸鋰粉末之結晶化與高低溫充放電機制
The crystallization and the charge-discharge mechanism of high-low temperatures for Al/Ga-coated LiMn2O4 powder systems
陳正宏 Chen, Cheng-Hung
氧化銅/氧化鋅奈米粉末-薄膜之顯微結構與光電磁特性研究
The microstructure and optoelectro-magnetic properties of CuO/ZnO (CuZnO) nanoparticles (thin film) systems
陳冠霖 Chen, Kuan-Ling
摻雜(錳；鎳)過渡金屬氧化鋅薄膜之結晶機制與光電磁特性
Crystallization and Optoelectro-Magnetic Properties of ZnO Thin Film by Doping (Mn; Ni) Transition Metals
劉旭偉 Liu, Xu-Wei
Ti-22V-4Al合金薄片顯微組織與拉伸機械性質及顆粒沖蝕磨耗特性研究
A Study on the Microstructures, the Tensile Mechanical Properties and Erosion Characteristics of Ti-22V-4Al Alloy Plates
102學年度
吳昭漢 博士 Wu, Chao-Han, Ph.D
鋰電池用AlxSiyAg1-(x+y)薄膜負極之後熱處理效應及其充放電特性研究
Effect of thermal post-treatment on the charge-discharge characteristics of AlxSiyAg1-(x+y) thin film anodes for Li-ion batteries
蘇昱豪 Su, Yu-Hao
熱擴散微細鍍鈀銅導線之組織特性及放電結球機制探討
Microstructures and Electric Flame-Off (EFO) Mechanism of Fine Palladium Coated Copper Wires (PCC) with Thermal Diffusion
簡濤 Chien, Tao
利用擴散製程摻雜碳與鐵對氧化鋅薄膜光電磁特性之影響
Effects of Diffusion Process Fe/C Doped on Optoelectro-magnetic Properties of ZnO Thin Film
莊琮貿 Chuang, Tsung-Mao
Sn-xNi和SAC105合金應用於光伏模組之界面微觀組織特性及通電機制研究
Interfacial Microstructures and Electrical Mechanism of Sn-xNi and SAC105 Alloys for Photovoltaic Module
103學年度
鄭傑勻 Cheng, Chieh-Yun
濺鍍金之銅導線成球性及打線接合可靠度研究
Free Air Ball (FAB) Characteristics and Wire Bonding Reliability of Sputtering Au-Coated Cu (ACC) Wires
鄭百棻 Cheng, Pai-Fen
矽鐵表面披覆改質錳酸鋰粉末組織特性與高電流速率充放電機制探討
The Structural Characteristics and the High Current Rate Charge-Discharge Mechanism of Si/Fe-coated LiMn2O4 Powder Systems
羅文男 Lo, Wen-Nan
T4T6熱處理與旋鍛製程對7075擠型鋁合金顯微組織與機械性質之影響
Effects of T4T6 Heat Treatment and Rotary Swaged Process on Microstructure and Mechanical Properties of 7075 Extruded Aluminum Alloy
104學年度
曾譯葦 博士 Tseng, Yi-Wei, Ph.D
無氰奈米鍍層精細銀導線顯微組織特性與電熱機制研究
Microstructural Characteristics and Thermoelectric Mechanism of Cyanide-free Nano-layer Coated Silver Wires
林佳緯 博士 Lin, Chia-Wei, Ph.D
新型應變誘發熔融激化製程下Al-Mg-Si合金之微觀組織演變、機械性質以及沖蝕磨耗特性研究
Studies of Microstructural Evolution, Mechanical Properties and Erosion Wear Resistance of Al-Mg-Si Aluminum Alloy Fabricated by a New Type Strain-induced Melt Activation Process
張家源 Chang, Chia-Yuan
熱處理製程對6069鋁合金微觀組織與拉伸機械性質之影響
Effects of Heat-Treatment Process on Microstructure and Tensile Mechanical Property of 6069 Aluminum Alloy
陳祉伃 Chen, Chih-Yu
SIMA製程AZ61鎂合金壓縮與拉伸及沖剪特性研究
A Study on Compression Properties, Tensile Properties and Shear-Punch Characteristics of Strain-Induced Melt Activation (SIMA) AZ61 Magnesium Alloy
洪嘉政 Hong, Jia-Zheng
3D雷射積層與熱蒸鍍薄膜之鎂負極顯微組織與充放電機制研究
Microstructures and Charge-Discharge Characteristics of Magnesium Film Anodes Produced by 3D Laser Additive Manufacturing and Thermal Evaporation
許傑丞 Syu, Jie-Cheng
Mg-1Ca-0.5Zr合金機械性質與表面腐蝕機制探討
A Study on Mechanical Properties and Surface Corrosion Mechanism of Mg-1Ca-0.5Zr Alloy
朱冠銘 Chu, Kuan-Ming
具奈米鍍鋅層精細鋁矽導線之放電成球機制及打線接合可靠度研究
Electronic Flame-Off Mechanism and Wire Bonding Reliability of Fine Zn-Coated Al-Si Wires
許琳 Hsu, Lin
Sn-Cu及Sn-Cu-Zn光伏銅帶之模組界面組織特性與通電機制研究
A Study on Characteristics of Microstructures and Electrical Mechanism of Sn-Cu and Sn-Cu-Zn Photovoltaic Copper Ribbon Modules
105學年度
薛皓文 博士 Hsueh, Hao-Wen, Ph.D
Researchgate ORCiD
精微銀合金導線之介金屬化合物成長及通電拉伸沿晶破壞動力學與機制探討
On the Kinetics and Mechanism of IMC Growth and Electrified Tensile Intergranular Fracture of Fine Silver Alloy Wires
林大鈞 博士 Lin, Da-Jun, Ph.D
生醫用鎂鋅合金微觀組織及表面處理效應對生物降解特性及生物相容性之影響
Effects of Microstructure Modification and Surface Treatment on the Biodegradable Characteristics and Biocompatibility of Bio-Magnesium-Zinc alloy
劉昌佶 Liu, Chang-Ji
新型應變誘導熔漿活化法製程對4384鋁合金微觀組織與沖蝕磨耗特性之影響
Effects of New Type Strain-Induced Melt Activation Process on Microstructure and Particle Erosion Characteristics of 4384 Aluminum Alloy
黃奕 Huang, Yi
兩階段熱處理對10B21低碳鋼鑽尾自攻螺絲微觀組織與機械性質之影響
Effects of Two-Step Heat Treatment on Microstructure and Mechanical Properties of 10B21 Low Carbon Steel Self Drilling Tapping Screws
陳炫博 Chen, Hsuan-Po
旋鍛製程對2024擠形鋁管微觀組織與拉伸機械性質之影響
Effects of Rotary Swaging on Microstructure and Tensile Mechanical Properties of 2024 Aluminum Extruded Tube
吳昱霖 Wu, Yu-Lin
3D-SLM製程Ti-6Al-4V合金微觀結構及機械性質研究
Microstructural Characteristics and Mechanical Properties of Ti-6Al-4V alloy Produced by 3D-Selective Laser Melting
許哲瑋 Hsu, Che-Wei
硫化及氯化對精細Ag-Pd-Au-Pt合金導線之打線接合可靠度研究
The Study of Wire Bonding Reliability of Fine Ag-Pd-Au-Pt Alloy Wire after Sulfidation and Chlorination Tests
張嘉芸 Chang, Chia-Yun
硫化與氯化對閃積金層鍍鈀銅導線顯微組織與打線接合特性研究
The Microstructure and Bonding Properties of Pd-Coated Cu wires Flash Au after Sulfidation and Chlorination
林文宇 Lin, Wen-Yu
浸鍍與電鍍Sn之Al銲帶應用於光伏模組界面組織特性與通電機制研究
A Study on Microstructures and Electrical Mechanism of Dipping or Electroplating Sn on Aluminum Ribbon Replied to Photovoltaic Modules
陳慧萍 Tan, Huey-Pyng
2D塗覆與3D積層製造Mg-Ni負極之高溫充放電特性研究
The High Temperature Charge-Discharge Characteristics of 2D Coating and 3D Additive Manufacturing on Mg-Ni Anode Materials
蔡峻霖 Tsai, Chun-Lin
熱處理對3D-SLM Al-10Si-Mg合金微觀組織與拉伸性質及顆粒沖蝕磨耗特性研究
Effects of Heating Treatment on the Microstructure, Tensile Properties and Erosion of Al-10Si-Mg alloy Manufactured by 3D Selective Laser Melting
蔡永翼 Tsai, Yung-Yi
蛇紋岩製備鎂離子電池特性研究
Material and Electrochemical Characteristics of Mg-ion Battery Using Serpentinite
106學年度
陳彥廷 博士 Chen, Yen-Ting, Ph.D
通電誘發結晶鋰電池鈦-矽-鋁多層膜負極材料界面特性與充放電機制探討
Interface Characteristic and Charge-Discharge Mechanism of Electrical Induced Crystallization (EIC) Modified Ti-Si-Al Multilayer Anode of Lithium Ion Battery
温千儀 Wen, Chien-Yi
生醫鎂-鋅-鋯-鈣合金機械性質及腐蝕特性探討
A Study on Mechanical Properties and Corrosion Characteristics of Biomedical Mg-Zn-Zr-Ca Alloy
吳冠穎 Wu, Guan-Ying
鍍銦錫光伏銅導帶模組微觀組織特性與通電機制研究
A Study on Characteristics of Microstructure and Electrical Mechanism of In-Sn Coated Photovoltaic Copper Ribbon Modules
吳昱賢 Wu, Yu-Hsien
氯化與硫化對金閃積層Ag-Pd-Au合金導線打線接合可靠度研究
A Study of Wire Bonding Reliability on Ag-Pd-Au Alloy Wire with Flash Au Film after Chlorination and Sulfidation
許朝政 Hsu, Chao-Cheng
固態鎂基鹽質離子導體材料特性與充放電機制研究
A Study on Material Properties and Charge-discharge Mechanism of Magnesium-based Solid-state Ionic Conductors
許耕翊 Hsu, Keng-Yi
精細鋁-鋅-矽合金導線微觀組織特性與機械性質及抗氯阻抗研究
A Study of Microstructure, Mechanical Properties and Chlorination Resistance of Fine Al-Zn-Si Alloy Wires
潘建宇 Pan, Chien-Yu
不同矽銅/鎂比例之鋁合金焊道組織特性與機械性質研究
A Study of Microstructure and Mechanical Properties of Aluminum Alloy Weld Bead with Different Si-Cu/Mg Ratio
107學年度
張意翎 博士 Chang, Yi-Ling, Ph.D
快速熱處理熱鍛6082鋁合金再結晶及微觀組織演變對拉伸性質效應研究
Studies of Recrystallization and Microstructural Evolution on Tensile Properties of Rapid Heated Hot Forging 6082 Aluminum Alloy
古明祥 博士 Ku, Ming-Hsiang, Ph.D
摩擦攪拌7075鋁合金銲道延性脆化之微觀組織效應研究
Effects of Microstructural Factors on Ductile-to-Brittle Transition of Friction Stir Welded Zone of 7075 Aluminum Alloy
何承璟 Ho, Chen-Chin
氯化與硫化及通電循環對電鍍金層Ag-4Pd合金精細導線之打線接合可靠度研究
The Study of Wire Bonding Reliability on Au-Coated Ag-4Pd Alloy Wire After Chlorination, Sulfidation and Power Cycling Test
李健豪 Lee, Jian-Hao
環保型鈉離子電池材料特性與充放電機制研究
A Study on Material Characteristics and Charge-discharge Mechanism of Eco-friendly Sodium-ion Battery
高培堯 Kao, Pei-Yao
Ca,Zr與Zn添加對鎂基負極材料組織與充放電特性研究
Effects of Adding Ca, Zr and Zn on Microstructure and Charge-Discharge Characteristics of Mg Alloy Anode Materials
林益帆 Lin, Yi-Fan
熱擠型銅鋅鉛合金高溫機械性質及熱軋延特性研究
A Study on High Temperature Mechanical Properties and Hot Rolling Characteristics of Hot Extruded Cu-Zn-Pb Alloy
方昱惠 Fang, Yu-Hui
光伏銦銲帶模組界面微觀組織與熱電特性研究
A Study on Characteristics of Interfacial Microstructure and Thermoelectric Behavior of In-based Photovoltaic Modules
何彥廷 He, Yen-Ting
固態鎂碳離子電池充放電機制研究
A Study on Charge-Discharge Properties of Magnesium-Carbon Ion Solid-State Battery
林彥伶 Lin, Yen-Ling
可降解型鎂鋅合金機械性質與生醫應用特性研究
A Study of Mechanical Properties and Biomedical Characteristics of Degradable Mg-Zn Alloy
陳柏舟 Chen, Bo-Jou
熱處理對6056鋁合金冷軋延特性與拉伸機械性質之影響
Effects of Heat Treatment on Cold Rolling Characteristics and Tensile Mechanical Properties of 6056 Aluminum Alloy
108學年度
趙俊任 博士 Zhao, Jun-Ren, Ph.D
積層製造航太級Ti-6Al-4V及Inconel 718合金高溫拉伸性質與顆粒沖蝕磨耗特性研究
Study on High-temperature Tensile Properties and Particle Erosion Characteristics of Aerospace Grade Ti-6Al-4V and Inconel 718 Alloy produced by Additive Manufacturing
王筠婷 Wang, Yun-Ting
可控制降解型聚乳酸/純鎂/磷酸鈣複合材料之機械性質與生醫應用特性探討
A Study on Mechanical Properties and Biomedical Application Characteristics of Degradable PLA/Mg/Ca3(PO4)2 Composite
廖顯慶 Liao, Hsien-Ching
固態鎵電池顯微組織特性與充放電機制研究
A Study on Microstructure and Charge-Discharge Mechanism of Solid-State Gallium Batteries
吳施慶 Wu, Shih-Ching
半導體機台腔體用鋁基板:電漿熱熔射氧化釔與氟氧化釔及Al-Ta合金塗層界面特性和顆粒沖蝕磨耗行為研究
Applications of Al substrate for chamber of semiconductor:characteristics of interface and behavior of particle erosion of Y2O3, YOF and Al-Ta alloy thermal plasma sprayed layers
賴婉婷 Lai, Wan-Ting
全固態錫電池顯微組織特性與充放電機制研究
A Study on Microstructure and Charge-Discharge Mechanism of Solid-State Tin Batteries
張哲豪 Chang, Che-Hao
鍍金鈀層精細銅導線氯化及通電破壞機制研究
A Study on Chlorination and Electrical Current Induced Failure Mechanism of Fine Au/Pd-Coated Cu wires
109學年度
劉泰翔 博士 Liu, Tai-Hsiang, Ph.D
硫化條件及熱電結晶效應對銅-(鋅)-錫-硫光伏材料特性及界面行為研究
Sulfurization and Thermoelectric Crystallization Effect on Structural Characteristics and Interface Behaviors of Cu-(Zn)-Sn-S Photovoltaic Materials
陳建宏 Chen, Jian-Hong
T4/T6熱處理連鑄連軋6082鋁合金顯微組織與機械性質研究
Study on Microstructure and Mechanical Properties of T4/T6 Heat-Treated Continuous Casting and Direct Rolling 6082 Aluminum Alloy
張又文 Chang, Yu-Wen
固態鉀電池粉末電極合成特性與充放電機制研究
A Study on Synthesis Characteristics and Charge-discharge Mechanism of Powder Electrodes for Solid-state Potassium-ion Batteries
侯柏脩 Hou, Po-Hsiu
固態鎂布二次電池充放電機制研究
A Study on Charge-Discharge Mechanism of Solid State Magnesium Cloth Secondary Battery
黃嫈庭 Huang, Ying-Ting
熱壓延與表面處理對醫療級可降解型鎂鋅合金機械性質與生醫應用特性研究
A Study on Mechanical Properties and Biomedical Application Characteristics of Hot-rolling and Surface Modify Medical Degradable Mg-Zn alloy
林郁哲 Lin, Yu-Che
精細銅微合金導線顯微組織與拉伸機械及通電性質研究
A Study on Microstructure, Tensile Mechanical and Electrical Properties of Fine Micro-alloyed Copper Wire
呂健生 Lu, Chien-Sheng
鑄造與SLM Inconel 713鎳合金顯微組織及材料應用特性研究
A Study on Casting and SLM Inconel 713 Alloy in Microstructure and Application Properties
110學年度
官欣 Kuan, Hsin
可撓性全固態鋰電池結構特性與充放電機制研究
A Study on Structural Characteristics and Charge-Discharge Mechanism of Flexible Solid-State Lithium-ion Batteries
李亮衍 Lee, Liang-Yan
熱處理對選擇性雷射熔融Al-Mg-Sc-Zr合金顯微組織與材料破壞機制及耐腐蝕性之影響
Effect of Heat Treatment on the Microstructure, Material Failure Mechanism and Corrosion Resistance of SLM Al-Mg-Sc-Zr alloy
辜彥凱 Ku, Yen-Kai
積層製造銅基合金顯微組織特性與機械性質研究
A Study on Microstructural Characteristics and Mechanical Properties of Copper Alloys by Additive Manufacturing
邱威碩 Chiu, Wei-Shuo
精細金銀合金與純金導線通電疲勞及耐蝕性研究
A Study of current fatigue and anti corrosion of fine Au-Ag alloy and Au wires
王奕翔 Wang, I-Hsiang
全固態鋅碳電池充放電機制研究
A Study on Charge-Discharge Mechanism of All Solid-State Zinc Graphite Batteries
陳昱任 Chen, Yu-Jen
精細多元銅微合金導線組織與拉伸性質及通電特性研究
A Study on Microstructure, Tensile Properties and Electrical Characteristics of Fine Multi Micro-Alloyed Copper Wires
吳汶育 Wu, Wen-Yu
鍍層鎂鋅合金顯微組織及機械性質與生醫應用特性研究
A Study of Microstructure, Mechanical Properties and Biomedical Application of Coated Mg-Zn Alloy
111學年度
許先騰 Hsu, Shen-Teng
精細銅-鉑-金-鈀微合金導線之拉伸性質與電熱特性及封裝可靠度研究
A Study of Tensile Properties, Electrothermal Characteristics and Packaging Reliability on Cu-Pt-Au-Pd Fine Micro-alloyed Wire