Former members

Sn-Cu及Sn-Cu-Zn光伏銅帶之模組界面組織特性與通電機制研究

A Study on Characteristics of Microstructures and Electrical Mechanism of Sn-Cu and Sn-Cu-Zn Photovoltaic Copper Ribbon Modules

具奈米鍍鋅層精細鋁矽導線之放電成球機制及打線接合可靠度研究

Electronic Flame-Off Mechanism and Wire Bonding Reliability of Fine Zn-Coated Al-Si Wires

Mg-1Ca-0.5Zr合金機械性質與表面腐蝕機制探討

A Study on Mechanical Properties and Surface Corrosion Mechanism of Mg-1Ca-0.5Zr Alloy

3D雷射積層與熱蒸鍍薄膜之鎂負極顯微組織與充放電機制研究

Microstructures and Charge-Discharge Characteristics of Magnesium Film Anodes Produced by 3D Laser Additive Manufacturing and Thermal Evaporation

SIMA製程AZ61鎂合金壓縮與拉伸及沖剪特性研究

A Study on Compression Properties, Tensile Properties and Shear-Punch Characteristics of Strain-Induced Melt Activation (SIMA) AZ61 Magnesium Alloy

熱處理製程對6069鋁合金微觀組織與拉伸機械性質之影響

Effects of Heat-Treatment Process on Microstructure and Tensile Mechanical Property of 6069 Aluminum Alloy

新型應變誘導熔漿活化法製程對4384鋁合金微觀組織與沖蝕磨耗特性之影響

Effects of New Type Strain-Induced Melt Activation Process on Microstructure and Particle Erosion Characteristics of 4384 Aluminum Alloy

生醫用鎂鋅合金微觀組織及表面處理效應對生物降解特性及生物相容性之影響

Effects of Microstructure Modification and Surface Treatment on the Biodegradable Characteristics and Biocompatibility of Bio-Magnesium-Zinc alloy

兩階段熱處理對10B21低碳鋼鑽尾自攻螺絲微觀組織與機械性質之影響

Effects of Two-Step Heat Treatment on Microstructure and Mechanical Properties of 10B21 Low Carbon Steel Self Drilling Tapping Screws

旋鍛製程對2024擠形鋁管微觀組織與拉伸機械性質之影響

Effects of Rotary Swaging on Microstructure and Tensile Mechanical Properties of 2024 Aluminum Extruded Tube

3D-SLM製程Ti-6Al-4V合金微觀結構及機械性質研究

Microstructural Characteristics and Mechanical Properties of Ti-6Al-4V alloy Produced by 3D-Selective Laser Melting

硫化及氯化對精細Ag-Pd-Au-Pt合金導線之打線接合可靠度研究

The Study of Wire Bonding Reliability of Fine Ag-Pd-Au-Pt Alloy Wire after Sulfidation and Chlorination Tests

硫化與氯化對閃積金層鍍鈀銅導線顯微組織與打線接合特性研究

The Microstructure and Bonding Properties of Pd-Coated Cu wires Flash Au after Sulfidation and Chlorination

浸鍍與電鍍Sn之Al銲帶應用於光伏模組界面組織特性與通電機制研究

A Study on Microstructures and Electrical Mechanism of Dipping or Electroplating Sn on Aluminum Ribbon Replied to Photovoltaic Modules

2D塗覆與3D積層製造Mg-Ni負極之高溫充放電特性研究

The High Temperature Charge-Discharge Characteristics of 2D Coating and 3D Additive Manufacturing on Mg-Ni Anode Materials

熱處理對3D-SLM Al-10Si-Mg合金微觀組織與拉伸性質及顆粒沖蝕磨耗特性研究

Effects of Heating Treatment on the Microstructure, Tensile Properties and Erosion of Al-10Si-Mg alloy Manufactured by 3D Selective Laser Melting

蛇紋岩製備鎂離子電池特性研究

Material and Electrochemical Characteristics of Mg-ion Battery Using Serpentinite

通電誘發結晶鋰電池鈦-矽-鋁多層膜負極材料界面特性與充放電機制探討

Interface Characteristic and Charge-Discharge Mechanism of Electrical Induced Crystallization (EIC) Modified Ti-Si-Al Multilayer Anode of Lithium Ion Battery

生醫鎂-鋅-鋯-鈣合金機械性質及腐蝕特性探討

A Study on Mechanical Properties and Corrosion Characteristics of Biomedical Mg-Zn-Zr-Ca Alloy

鍍銦錫光伏銅導帶模組微觀組織特性與通電機制研究

A Study on Characteristics of Microstructure and Electrical Mechanism of In-Sn Coated Photovoltaic Copper Ribbon Modules

氯化與硫化對金閃積層Ag-Pd-Au合金導線打線接合可靠度研究

A Study of Wire Bonding Reliability on Ag-Pd-Au Alloy Wire with Flash Au Film after Chlorination and Sulfidation

固態鎂基鹽質離子導體材料特性與充放電機制研究

A Study on Material Properties and Charge-discharge Mechanism of Magnesium-based Solid-state Ionic Conductors

精細鋁-鋅-矽合金導線微觀組織特性與機械性質及抗氯阻抗研究

A Study of Microstructure, Mechanical Properties and Chlorination Resistance of Fine Al-Zn-Si Alloy Wires

不同矽銅/鎂比例之鋁合金焊道組織特性與機械性質研究

A Study of Microstructure and Mechanical Properties of Aluminum Alloy Weld Bead with Different Si-Cu/Mg Ratio