• Continue order submittal process for HVAC equipment, electrical panels/gears. 

• Installed construction fence at the main entrance.

• Continue demo in Classroom Pod 2. 

• Began electrical demolition for front entrance redesign and new nurse’s office. 

• Excavate for proposed plumbing rough in for Classroom Pod 2 and the future nurse’s office. 

• Continue rough in for electrical in Classroom Pod 2.

• Complete temporary restoration of the main entrance corridor.

• Clean corridor at main entrance. 

• Install hasp and combo lock on a single exterior door into Classroom Pod 2.

• Filed third party excavation and footing reports.

• Completed footing excavation for addition.

• Began laying CMU wall for addition.

• Concurrent roof improvements, by others, happening nearby. 

• Saw cutting of floor for plumbing.

• Continue concrete piers and slab prep at addition.

• Repaired temporary partition/wall. 

• Continue demolition of main office walls, lighting, floors, plumbing & HVAC.

• Lay out only plumbing slab cuts. No work done yet.

• Installed temporary wall along existing block wall.

• Concurrent roof improvements, by others, happening nearby.

• Installed temporary wall along existing block wall. 

• Completed demolition of the main office, nurse’s office, and room 400.

• Lay out only plumbing slab cuts. No work done yet.

• Began duct work for the nurse’s office.

• Concurrent roof improvements, by others, happening nearby. 

• Completed ductwork installation in former main office space.

• Troubleshooted lights in three adjacent rooms. 

• Assessed and approved temporary make-up air supply & return to nurse’s office.

• Removed dust containment plastic drapes at main entrance for arrival of staff.

• Continue ductwork installation in the main corridor.

• Begin saw cutting of the floor for plumbing.

• Begin plumbing slab removal.

• Continue order submittal process for HVAC equipment, electrical panels/gears. 

• Installed construction fence at the main entrance.

• Begin electrical demolition and rough in.

• Complete temporary restoration of the main entrance corridor.

• Clean corridor at main entrance.

• Install hasp and combo lock on a single exterior door into Classroom Pod 2.

• Phase 1 of asbestos abatement is complete. The final phase will continue in Summer 2027.

• Tape exposed duct insulation in Classroom Pods 2 & 3. These pods only have a ceiling grid, no tiles.

• Continue order submittal process for HVAC equipment, electrical panels/gears. 

• Installed construction fence at the main entrance. 

• Excavated to investigate existing storm drainage.  

• Demolished existing sidewalk. 

• Demolished existing main entrance canopy. 

• Began demolition of corridor ceiling and previous main office. 

• Installed pipe insulation.

• Construct proposed alcove in corridor for future nurse’s office.

• Continue framing corridor radius soffits.

• Clean up existing wiring in the corridor. 

• Install sleeves into the future nurse’s office. 

• Remove existing deteriorated fiberglass ceiling insulation in the future nurse’s office and corridor.

• Begin heat pump repalcement in mid-to-late winter.

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027) 

• Addition of secure vestibule 

• Interior reconfigurations in existing main office and classroom pod 1 

• Boiler upgrades 

• Ductwork, plumbing piping installation for proposed reconfiguration of nurse’s office and main office 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior reconfigurations in existing nurse's office and classroom pod 2 

• HVAC upgrades in classroom wing 

• Interior door/hardware replacement 

PHASE 3 – Start in June 2027 (Substantial completion expected by October 2027) 

• Interior reconfigurations in main entrance lobby and classroom pod 3 

• Fire alarm system and HVAC controls upgrades 

• Exterior door/hardware and front entrance replacement 

• Switchgear replacement 

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027) 

• Addition of secure vestibule 

• Interior reconfigurations in the existing main office and nurse’s office 

• Structural, plumbing, and sheet metal work for HVAC upgrades 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior door/hardware and front entrance replacement 

• HVAC upgrades, including classroom and roof-top unit replacements 

• Associated structural, plumbing and sheet metal work 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Exterior door/hardware and front entrance replacement 

• Associated structural, plumbing and sheet metal work 

PHASE 4 – Start in June 2027 (Substantial completion expected by October 2027) 

• Fire alarm system and HVAC controls upgrades

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027)  

• Interior reconfigurations in main office

• Boiler upgrades 

• Structural, plumbing and sheet metal work for HVAC upgrades 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior door/hardware replacement 

• HVAC upgrades, including classroom and roof-top unit replacements 

• Associated structural, plumbing and sheet metal work 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Exterior door/hardware and front entrance replacement 

• Interior reconfigurations in nurse's office 

• Associated structural, plumbing, and sheet metal work 

PHASE 4 – Start in June 2027 (Substantial completion expected by October 2027) 

• Fire alarm system and HVAC controls upgrades

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027) 

• Interior reconfigurations in existing classrooms, including demolition of the old main office and nurse’s office 

• Structural, plumbing, and sheet metal work for HVAC upgrades 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior door/hardware and front entrance replacement 

• HVAC upgrades, including classroom and roof-top unit replacements 

• Associated structural, plumbing and sheet metal work 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Exterior door/hardware and front entrance replacement 

• Interior reconfigurations for the main office and nurse's office  

• Associated structural, plumbing and sheet metal work 

PHASE 4 – Start in June 2027 (Substantial completion expected by October 2027) 

• Fire alarm system and HVAC controls upgrades

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027) 

• Interior reconfigurations in the existing main office

• Boiler upgrades 

• Structural, plumbing, and sheet metal work for HVAC upgrades 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior door/hardware, and classroom storefront/window replacement 

• HVAC upgrades, including classroom and roof-top unit replacements 

• Associated structural, plumbing and sheet metal work 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Exterior door/hardware replacement 

• Interior reconfigurations in nurse's office 

• Associated structural, plumbing, and sheet metal work 

PHASE 4 – Start in June 2027 (Substantial completion expected by October 2027) 

• Fire alarm system and HVAC controls upgrades 

PHASE 1– Start in June 2026 (Substantial completion expected by May 2027) 

• Addition of secure vestibule 

• Interior reconfigurations in existing main office and Classroom Pod 1

• Boiler upgrades 

• Ductwork, plumbing, and piping installation for proposed HVAC upgrades 

• Asbestos abatement 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior reconfigurations in existing nurse’s office and classroom pod area 

• HVAC upgrades in classroom wing 

• Interior door/hardware replacement 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Interior reconfigurations in main entrance lobby and classroom pod area 

• Exterior door/hardware replacement 

• Classroom entrance replacement 

• Fire alarm system and HVAC controls upgrades

PHASE 1 – Start in June 2026 (Substantial completion expected by May 2027) 

• Interior reconfigurations in the existing main office and secure vestibule addition 

• Exterior stair replacement 

• Ductwork, plumbing, and piping installation for proposed HVAC upgrades 

PHASE 2 – Start in January 2027 (Substantial completion expected by May 2027) 

• Interior door/hardware replacement 

• Rooftop and air handling unit replacement 

• Window replacement in the Board of Education office 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Interior reconfigurations 

• Exterior door/hardware replacement 

• HVAC upgrades in the Board of Education office and classrooms 

• Classroom storefront/window replacement 

• Boiler upgrades 

PHASE 4 – Start in June 2027 (Substantial completion expected by October 2027) 

• Fire alarm system and HVAC controls upgrades

PHASE 1 – Start in June 2026 (Substantial completion expected by November 2026) 

• Interior reconfigurations in main office

• Boiler upgrades 

• Exhaust fan replacement 

PHASE 2 – Start in September 2026 (Substantial completion expected by June 2027) 

• HVAC upgrades, heat pump replacement, plumbing and sheet metal work 

• Classroom door/hardware, entrance and HVAC unit replacement 

PHASE 3 – Start in June 2027 (Substantial completion expected by August 2027) 

• Remaining HVAC upgrades, plumbing and sheet metal work  

• Fire alarm system HVAC controls upgrades