Embedded Files
Mock Flow Loop
Mock Flow Loop
Annotated photo of the mock flow loop during operation
Annotated schematic of the mock flow loop
2D schematic of the mock flow loop
Pressure Readings
Pressure Readings
The below are pressure measurements recorded during a mock surgery on the mock flow loop
Aorta Model
Aorta Model
3D-print of the refined model aorta
Current, refined 3D model aorta
Yellow Aorta w/ female-barbed cuff sealing ascending opening
Pressure Sensor System
Pressure Sensor System
Complete wiring to all 4 sensors
Soldered filter cap
Overhead view of filter cap with wiring to sensors
Catheter Insertion Point
Catheter Insertion Point
CAD model for gasket
ViVitro SuperPump
ViVitro SuperPump
The ViVitro SuperPump with the controller right below it (not shown). The front opening is the pump outlet and the back opening is the pump inlet
Aorta-Tubing Adapter
Aorta-Tubing Adapter
Tube Adapter
Tube Adapter
Tube adapter
Tube adapter
3-Way Splitter
3-Way Splitter
CAD model for 2 catheter insertion points, barbed connection. Top side -> tubing -> barbed cuff -> aorta.
Flexible Barbed Cuff
Flexible Barbed Cuff
1st iteration CAD model for multiple female-barbed cuff to seal Yellow Aorta, ascending opening. Barbs were not large enough and the barbed side had too small a diameter.
Current CAD model for multiple female-barbed cuff to seal ascending opening of model aorta
Current CAD model for single female-barbed cuff to seal the abdominal opening
Page updated
Report abuse