Teamwork

The lamp project took a lot of different steps in building it. After we finished the design process we cut out the pieces of metal that we needed for our scrolls.

Chase was building an exhaust tip for his truck. He made up a plan and was going from a 3 inch to a 5 inch tip. He rolled up the metal using the rollers and made the exact diameter that he needed. Then we used teamwork to spot weld the joints together and it came out really well.

his was a pretty cool project because of how different it was from the other tables we had made. We have made a few tables so far but this one was actually built to hang on the wall. We built the table top first out of scrap wood and made a really cool design so it wasn't just your typical table top and it came out really cool.

For the past few weeks Chase and I have been working on building the go cart. We have built the frame and welded it all together. We made the mount for the motor and then mounted the motor to the frame of the go cart. We made the seat frame also and welded the seat to the frame of the go cart.