Configure an IP endpoint (Console)

Console > Account > IP Endpoints > Configure an IP endpoint (Console)

This article explains how to configure an IP endpoint in Console.

Configuring an IP Endpoint is a two-step process. The first part of the process is to create the endpoint. Then, once it’s created, you’ll then customize the endpoint by configuring the settings related to the device, like the general endpoint’s settings, the device’s network settings, line keys for the endpoint if applicable, and more.

Below are the steps for creating the endpoint and the steps for configuring the different settings that might relate to the endpoint.

Create an IP endpoint

2. Click Account > IP Endpoints to open the IP Endpoints workspace. 

3. Click the Create IP Endpoint button.

4. Choose a template to link the IP endpoint to or leave it blank if you do not want it linked to a template.

5. Assign the IP endpoint a name in the Name field.

6. Type the MAC address in the MAC field.

Note: This is usually located on the bottom of the IP endpoint or on its packaging.

7. Select a user to assign the IP endpoint to in the Assigned To field, or leave it Unassigned.

8. Click Save

Configure the Endpoint's settings

2. In the Endpoint Settings container, configure the following fields:

Configure the Device Network Settings

2. Fill out the following fields in the Device Network Settings container.


Note: You may need to contact your system administrator for this information.

Configure Line Keys (Optional)

2. Under Type, choose whether the line key will be a Busy Line Field (BLF) or Speed Dial.

3. Under Configuration Type. Select User or Line group.

4. Under Configuration, select the user or line group associated with the line key.

5. Under Label, choose a name for the line key.

Configure custom settings (Optional)

Custom settings allow you to change the configuration of an endpoint remotely.

Read more