do-  get goggles to protect your eyes from the wood,     Clean your area when done turn it off hen your finish with it

DONT- don't play around when the band saw is on, don't distract people while they are  working with the band saw    

So today I learn the method on how to use the planer saw and the safety things to do when your using it 

• first you have to make sure you correct measure so you have the wood perfectly cut  through the mouth

• second you have to let the wood cut by itself don't put your hand through the mouth because you can get cut 

DONT    dont put your hand in the mouth so you don't get cut 

dont run around while its on 

dont look into the planer while its running

This was the first time using a miter saw and it was easy to learn the steps just don't cut your fingers off

Miter saw safety 

DO' Sunplug the saw when you are changing the blade or when you are using it wear glasses to protect your eyes from the wood being cut out and hen you finish with the blade turn it off and let the blade fully turn off

So  this my name  from a type of structured red plastic (vinyl) that made from a certain machine(circut) and you had to out with xacto knife   

we had to glue the perimeter on our wood and then stain it

DO                                      

you have to wear protection so the staining wont stain your clothes  and wear gloves so it don't mess your skins up and always damp with a fabric don't put the whole fabric in the staining

DONT 

don't play around the the table where the staining because it could spill and dont leave the staning open you have to close when you finish

So what I did was put 6 boxes to equal up to my name because I have 6 letter in my name and then I had to put my name on top of the boxes and then all the box suppose to line up and look perfect .And the site i use to make my 3d print nob is called Tinkercad - its a site where you make  3d  things or characters and can use a 3d printer to make the creation with this website

 keep hands away from blade 

tie up the hair

tuck your tie

remove loose clothing

clean up after machine

slowly move wood from the blade

I used wood glue to glue the perimeter back together. Then I had to figure out which wood goes on which side. Finally I used the clamps for the perimeter wood so the glue can dry up.

 So what I did was use TinkerCAD to make a 3d model with my name. So I can use it as a handle for my box.

This is a picture of my box stencil, but its spray painted. We put duck tape around my name to protect the rest o the box

I got my light to blink and turn on you have to out the longer gp 14 and you have to put the shorter leg in gnd 

`sso this is a 3d model i made its has  little shades and little circle the  little circle are were we gonna put led light

So this is me measuring my 3d model for a project we  have started on i drew this 3-d model and drew all the parts outs separate then i created it into  carboard.

So  this is my box structure, i created this by first using a grid sheet creating a 3--d pyramid  and measuring the sides and  the bottom and creating into a small carboard figure

so what i did for my pattern i have 10 led lights. i have 5 blue 3 whites 2 red i made a drawing of a exmaple of hwo to make a pattern for my led lights for my sturcterd  3d model

So what I did to make my Inkscape prototype I made a pyramid with medium wood, and it takes 50 minutes. The prototype is for our motherboard.

When you get your prototype cut out the pieces you have to assemble it by

using glue and then put your led lights.

Have to record your led lights blinking in a pattern that you created.

And put on your google sites.

DESCRIPTION: A planer saw is a woodworking tool that’s used to It helps your smooth rough wood, shave wood t

DO Wear a dust mask, hearing protection and safety glasses when using the planer saw. 

Keep your hands away from the cutting area 

Unplug the tool when it’s not in use so kids can’t turn it on 

DONT  Do not wear loose clothes, gloves 

always take it off when your done using it

 description 

A table saw is a woodworking tool that uses a circular saw blade. to cut big pieces of wood 

DO'S   Wear the Proper Clothing 

Protect Your Eyes, Ears,  

and wear proper footwear.

always wear a glove

and ear plugs and wear safety goggles

DON'T

Do not reach around and over moving blades. 

No loose clothing either or jewelry or neckties

and

DESCRIPTION: A orbital sander is a tool that aggressively sands the wood, and you can change the level how fast the vibration

DO   

Do not wear loose clothing, jewelry or work gloves. 

When starting, let the sander reach full speed before sanding, 

need goggles and earmuffs. 

DONT

Don't ever start without gloves.

and when you finish let the blade stop and then plug it out

We learn about DIY coasters of wood pieces we had to make a sketch and have to make the angle, and make patterns of our own.

THINGS we need for it.

planer saw. 

table saw.

orbital sander