Laser Cut Holiday Decoration with Image

Slide Shows

Rubric

• 10 Pts. - The CAD Parts and Assembly on Slideshow

• 20 Pts. -  The Drawing File for the Laser Cutters on Slideshow

• 30 Pts. - The Finished Product on Slideshow

You will design 3 different Part files that will be the "layers of your ornament.

• Each part should have a 4" diameter

• The middle layer should have a hole or loop to hand the ornament.

• The thickness of the outer circle should be between 0.1"-.25" thick.

• The thickness of the extrusion should be 0.25" per layer 

Open a Drawing file on Inventor

• Delete everything on the sheet so it is blank.

• Grab a piece of wood from the top shelf in the laser cutting room.

• Resize the sheet so it is the size of the piece of wood you will be using.

• Place all 3 Part files onto the Drawing Sheet

• Set it up on the Epilog Laser Cutter

  • Engrave

    • Speed = 100

    • Power = 50

    • Resolution = 300

  • Vector

    • Speed = 5 

    • Power = 100

    • Frequency = 50