Search this site
Embedded Files
Skip to main content
Skip to navigation
FABRICATION
Innovation Commons
Home
Peopoly Moai
F3D00: STRATASYS 3D PRINTER
F3D01: Stratasys Uprint/F170
Lathe
Scroll Saw
MITER SAW
FVF00: Vacuum Forming
FVF01: How to Use the FormBox to create a mold
FVF02: Creating Chocolate Candy
FVF03: Creating Custom Soaps
FABRICATION
Innovation Commons
Home
Peopoly Moai
F3D00: STRATASYS 3D PRINTER
F3D01: Stratasys Uprint/F170
Lathe
Scroll Saw
MITER SAW
FVF00: Vacuum Forming
FVF01: How to Use the FormBox to create a mold
FVF02: Creating Chocolate Candy
FVF03: Creating Custom Soaps
More
Innovation Commons
Home
Peopoly Moai
F3D00: STRATASYS 3D PRINTER
F3D01: Stratasys Uprint/F170
Lathe
Scroll Saw
MITER SAW
FVF00: Vacuum Forming
FVF01: How to Use the FormBox to create a mold
FVF02: Creating Chocolate Candy
FVF03: Creating Custom Soaps
MITER SAW
The Miter Saw is used to crosscut wood dimensional lumber (2x4, 1x2, 4x4, etc...)
Crosscut means to cut wood across the grain
USE THIS SAW TO CUT WOOD ONLY
SAFETY PRECAUTIONS
Always wear safety glasses when using the saw
Ear protection is recommended
Securely hold material in place
Push material
fully back
against the fence (The back vertical flange)
Use your hand or a clamp to seure the material when cutting.
Make sure you hand is not over the yellow areas on the table
It is recommended that your hand is 6" away from the blade whenever cutting
Make sure the blade is not touching the material when starting the motor
It recommended that the blade is in the full up position before starting
Move the blade slowly through the material.
DO NOT CHOP
Move the blade fully through the material until the saw stops.
Release the power button and let the blade come to a complete stop before moving the saw back to the rest position.
Report abuse
Report abuse