Toy Conv. Kit

THE NEW UPDATED VERSION OF THIS AMAZING KIT WILL CONVERT

YOUR OWN STANDARD ISSUE BLASTER

INTO THIS

WITH ONLY MINIMAL MODIFICATION TO YOUR OWN EXISTING BLASTER. THAT'S RIGHT THESE PARTS ARE CONSTRUCTED TO FIT OVER YOUR ORIGINAL BLASTERS MOULDED IN DETAILS

THIS NEW KIT IS QUICKER TO ASSEMBLE THAN BEFORE ITS LIGHTER AND EVEN MORE DETAILED WITH NEW PARTS

FIRST OFF IS PART 8 THE NEW M38 SCOPE SKIN CREATED TO MAKE THE EXISTING SCOPE PROFILE MORE ACCURATE FROM THE FRONT AND SIDE THE REAR IS STILL ABIT TOO FAT TO BE 100% IDENTICAL BUT THIS BRINGS IT ALOT CLOSER AND NOW INCLUDES PART 13. A DECAL FOR THE REAR SCOPE IT MAKES THE REAR PROFILE ALOT MORE INTERESTING ALSO FOR CLEARANCE PURPOSES WHEN THE OVER SKIN IS FITTED IT MAKES THE SCOPE THE EXACT SAME LENGTH AND FORWARD THICKNESS AND PROFILE AS AN ORIGINAL M38

*

TO FIT THE NEW SCOPE SKIN SIMPLY CUT AWAY THE FRONT SECTION OF THE EXISTING SCOPE

PART 12 THE REAR SLING MOUNT HAS BEE REDESIGNED AND NOW FEATURES A NON FUNCTIONING FIXED RING WHEN COMBINED WITH PART 6 CONVERTS THE REAR END CAP TO A FINISHED MORE ACCURATE CANON LOOK

WE NOW INCLUDE THE TWO MISSING BARREL FINS FOR EITHER SIDE OF THE BLASTER TO COVER ALL THE OPEN HOLES ON THE LEFT AND LEAVE ONLY THE LAST HOLE OPEN ON THE RIGHT SIDE AS PER THE SCRREN USED BLASTERS

APART FROM ALL THE NEW PARTS, ALL THE EXISTING PARTS HAVE HAD AN OVERHAUL TOO THE FORWARD AND REAR STOCK SECTIONS HAVE BEEN MADE LIGHTER AND EASIER TO PRE ASSEMBLE WITH POSITIONING LUG BEFORE FITTING

THE MOST DRAMATIC OVERHAUL BEING PART 7. THE MAG CYLINDERS HAVE BEEN COMPLETLY REDESIGNED TO CLOSER MATCH THE ORIGINAL PROP

THE MAGAZINE HOUSING HAS BEEN MADE LIGHTER AND DEEPER TO ACCOMODATE THE CUT DOWN MAG

THE KIT CONTAINS

1. FRONT STOCK SECTION

2. REAR STOCK SECTION

3. MAGAZINE HOUSING

4. FRONT BARREL END *

( *THIS ITEM IS PROVIDED AS AN OPTIONAL FINISHING EXTRA IT WILL REQUIRE THE CUTTING OFF OF THE ORIGINAL ORANGE BARREL TIP TO FIT . IT IS YOUR SOLE RESPONSIBILITY TO PAINT THE NEW TIP ORANGE IF USED DEPENDING ON YOUR LOCAL LAWS )

5. CUT DOWN MAGAZINE

6. REAR END CAP DETAILING

7. MAGAZINE CYLINDERS

8. M38 SCOPE SKIN

9. COUNTER BOX

10. LARGE LEFT SIDE BARREL FIN

11 SMALLER RIGHT SIDE BARREL FIN

12.REAR SLING MOUNT

13. REAR SCOPE DECAL

*YOU WILL NEED TO SUPPLY YOUR OWN TOY BLASTER*

THESE PARTS CANNOT BE USED TO MAKE AN E-11 BLASTER WITHOUT USING AN ORIGINAL KENNER/HASBRO TOY BLASTER. ALL THE PARTS ARE SPECIFIC IN SIZE AND DESIGN AND ZERO TOLERANCE TO FIT ONLY A KENNER/HASBRO TOY E-11 THEY WILL NOT FIT INTO KNOCKOFF VERSIONS OR ANYTHING SIMILAR TO KENNER/HASBRO TOYS IF YOU NEED A KIT TO COMPLETE A PVC PIPE BLASTER THEN I ALSO SELL THOSE

THESE ITEMS ARE DEFINED AS CUSTOM MODULAR SCULPTURES CREATED BY DOOPYDOOS LTD AND AS SUCH ARE COVERED UNDER UK AND INTERNATIONAL COPYRIGHT LAWS

ALL THE ABOVE PARTS HAVE BEEN CUSTOM SCULPTED TO FIT AROUND THE EXISTING BLASTER DETAILING WITHOUT ANY MODIFICATION BAR THE REMOVAL OF THE SCOPE TIP AND FRONT BARREL IF USED THEY CAN BE FITTED IN THE TIME IT TAKES FOR THE GLUE TO DRY THEY WILL NOT MAKE ANY DIFFERENCE TO THE FIRING OF THE BLASTERS SOUNDS OR LIGHTS

REMEMBER THE PICTURE ABOVE OF THE FINISHED BLASTER HAS NOT BEEN FILLED , SANDED, IN ANY WAY AND DID NOT REQUIRE ANY ADVANCED SKILL TO CONSTRUCT

JUST GLUE AND SPRAY BLACK THEN AS A FINISHING TOUCH FIT THE DECAL

YOU CAN IF YOUR FEELING BRAVE USE A LITTLE FILLER AND MAKE THE SKINS SEAMLESS FOR THAT EXTRA TOUCH