E93 - Radius Belt

E93 – FG WITHOUT TAB

• Pitch = 30 mm

• Open area = 47%

• Thickness = 16 mm

• Turning radius = 2.2 times the belt width

• Rod diameter = Ø 8 mm

Narvilink/Eurobelt Series E93 Flush Grid without edge tab enables all kind of turns whose minimum radius is 2.2 times the belt width.

This conveyor belt has Flush Grid geometry, with a 47% open area, and smooth and rounded edges, which provides an excellent drainage, a very easy cleaning, good sliding properties, as well as very low maintenance costs.

E93 – FG WITH TAB

• Pitch = 30 mm

• Open area = 47%

• Thickness = 19 mm

• Turning radius = 2.2 times the belt width

• Rod diameter = Ø 8 mm

Narvilink/Eurobelt Series E93 Flush Grid with edge tab has been designed to enable all kind of turns whose minimum radius is 2.2 times the belt width.

Their tabs are lateral ends located in the lower edge of the belt and are used to fasten it without interfering in the transport area, so that the product can exceed the belt width in the turns.

The rounded shape of the tabs reduces the points of friction with the hold-down profiles, which contributes to increase the life of the belt.

E93 – CONIC

• Pitch = 30 mm

• Surface = Non-skid

• Turning radius = 2.2 times the belt width

• Rod diameter = Ø 8 mm

Narvilink/Eurobelt Series E93 Conic has a smooth surface with small conic-shaped projections that provide a greater coefficient of friction, as well as they avoid the slippery products to change their position during the conveyance.

E93 – CONIC FRICTION

• Pitch = 30 mm

• Surface = Non-skid

• Turning radius = 2.2 times the belt width

• Rod diameter = Ø 8 mm

Narvilink/Eurobelt Series E93 Conic Friction Top is a conveyor belt with modules made in rubber which are inserted among the rest of modules of the belt in order to obtain good friction mechanical properties in applications which require so.

These rubber modules have conic-shaped projections which enable the execution of elevating and/or descending conveyors for manipulation of boxes or containers.

E93 – SLIDING ROLLERS

• Pitch = 30 mm

• Surface = Sliding Rollers

• Turning radius = 2.2 times the belt width

• Roller diameter = Ø 20 mm

• Rod diameter = Ø 8 mm

Narvilink/Eurobelt Series E93 Sliding Rollers is provided with small rollers inserted on its surface that rotate around themselves whenever there is product accumulation, avoiding crushing and wear in the base of the product.

This conveyor belt has been designed mainly to solve problems of conveyance of boxes, containers, etc.