Following are my Atari stuff that was put on sale for over 10 years ago but no longer for sale now as the item may have deteriorated further as they are over 30 years old. This is to avoid friction between buyer and me as items may not work. However, all were in working condition; last tested to be working on the STFM, Falcon or TT before I removed them.

This page is left here just for historical sake, and not maintained any more and unsure of how long Google will allow free web hosting.

• • TEC Tos 2.06 upgrade kit

  • 4MB memory upgrade kit

  • ASCI-SCSI adapter for ST

  • IDSC-21E SCSI-IDE adapter with CF adapter and 128MB CF card SOLD !!

  • Falcon Power Supply Unit

TEC Tos 2.06 upgrade kit

Upgrade your Atari ST to TOS 2.06.

This kit is in working condition when it was remove from the Atari STFM. Installation instructions are in English. Clearly written on how to install. Easy installation with only 22 wires to solder on to the CPU. The wires to be solder are all colour coded. According to the instructions, it is possible to add this upgrade to all flavors of ST motherboard. Fits inside the ST case.

Instructions include optional configuration that allows original TOS and new TOS 2.06 to be switchable.

Unit is fully tested and working at time of removal. Due to the age (~30 years) of this TOS 2.06 upgrade, it will be sold As-is.

No longer for sale. ( was priced at £130)

4MB Memory upgrade

Add up to 4MB of memory for your Atari ST.

This kit is in working condition when it was remove from the Atari STFM. Comes with 4MB ram populated. Easy solderless installation, however, a simple cut of a resistor is needed. Installation instructions are in English. Clearly written on how to install. Fits completely inside the ST case.

Unit is fully tested and working at time of removal. Due to the age (~30 years) of this memory upgrade, it will be sold As-is.

No longer for sale. ( was priced at £95)

ASCI-SCSI adapter - Supra harddisk adapter

Add harddisk drives to your ST.

This adapter is in working condition wahen it was remove from it mounting/case. It has a clock chip similar to the one on the Falcon. The clock chip however needs replacing as the battery is drained. It gives your ST a system clock equivalent. Instructions manuals are in English.

Tested drives includes the Syquest 555 and a SCSi-IDE converter with a IDE Quantum Fireball. Both drives was accessible from the STFM including the IDE drive!!

Comes with 1 x ASCI DMA cable to connect the ST to the adapter card; and 1 x 3-way 50 pin SCSI-1 cable to connect up to 2 SCSI drives to the adapter card. You can connect more devices up to 7 in total with an appropriate cable.

The adapter needs a 5V power supply. It should fits in an external box/case that has a 5V power supply for both the adapter card and SCSI drives. The external box/case and power supply are not included in this sale.

Unit is fully tested and working at time of removal. Due to the age (~30 years) of this adapter, it will be sold As-is.

No longer for sale. ( was priced at £240)

Falcon 030 Power Supply Unit - US model -110V

This Falcon power supply unit was removed from my Falcon when the CT63 accelerator board was installed.

The PSU is for the US model Falcon and so I would rate it as 110V input. It is in good working condition and was working flawlessly in my Falcon before it was removed.

Due to the age (~26 years) of this Falcon PSU, will be sold As-is.

No longer for sale. ( was priced at £95 )

IDSC-21E SCSI-IDE adapter with CF adapter & 128MB CF card (SOLD)

Item for sale are

• • One IO-Data IDSC-21E SCSI-IDE convertor with firmware v1.27

  • One 40pin CF adapter with master/salve jumper

  • One SanDisk CF card of size 128MB

  • One Y-power splitter cable to power the IDSC adapter

  • One Molex to floppy cable to power the CF adapter

All componets that are needed to connect up the SCSI-IDE adapter and CF adapter are provide in this lot. All that is required to do is just connect up the power and connect the internal 50-pin SCSI cable from your TT, and power on.

Included is a SanDISK CF card that is partitioned into 2 partitions - a TOS boot partition drive C: of size 80MB and an Ext2 filesystem partition D: of size 42MB. It is configured to AUTO boot from drive C: on the TT.

An installed boot selector allows the selection of either GEM or Mint Multitasking OS. The MintNet networking option is also installed and can be activated by uncommenting 2 command lines in the MINT.CNF file. Of course you need to have add your own networking hardware and drivers for it. Drive D: is Ext2 filesystem and contains the standard Mint Unix-like environment. Drive D: can only be access in Mint.

This unit has been tested on my TT030 (Rev J) and used to be my spare device.

Sold for £80 exclusive of P&P.

Was a good bargain for the buyer as a similar one on eBay was selling for more than double the price at around the same time. Yeap, I knew about the eBay offer but this was to help fellow Atarian users, so there's no price increase for this item.