Week 5 - Journal
Ideation
Tell us about your assignment's idea for this week. Why do you care about this idea? What inspired you? (Please include images or links to sources of inspiration)
Inspiration from a YouTube video
We'll build a simple electronic device that performs two actions.
My idea is to make a model of water well, The model has a bucket can go up and down and a lamp for light.
my inspiration from a youtube video making water well. YouTube link
Tool Chain
Which software/machines/materials did you use in the assignment? Why?
Tinkercad
We used Tinkercad to design and simulate our device circuit.
Cardboard
We used cardboard to assemble my device's components.
glue gun
We used a glue gun to glue my device.
Design/Preparation Process
Explain the design and/or preparation process of your assignment. How did you use the tool or software to design and/or prepare your assignment before fabrication/implementation?
simple sketch
The function of my device is to take water from the well, so the bucket needs to go down and up, and need light to see in the dark.
So I made a simple sketch to know the parts I needed and the dimensions.
Then I opened Tinkercad and start design my circuit, but I couldn't simulate it because I used more than one push button, so I took my components and started assembling.
The components I used:
The Output components
Hobby Gearmotor
The gear motor moves my bucket up and down.
Light bulb
The light bulb to light the area.
The voltage source's
DC adapter (5v)
I used a DC adaptor (5v), so he can be able to move my bucket normal speed.
The Wires
jumper wires (alligator)
I used alligator wires to connect the lamp with on/off switch and make a series circuit.
Jumper wires (MM)
I used MM wires to connect the gear motor.
Other components
I used On/Off rectangular switch to open and close the circuit.
I used four push buttons to control the movement of the gear motor.
screw tirminal plug to female dc adaptor to connect the power to breadboard
Breadboards are used to help me to connect components to complete the circuit.
The Circuit
I used 5v adaptor as a voltage source's.
I used The H-bridge arrangement so I can reverse the polarity/direction of the gear motor using four push buttons
I connected on/off switch with lamp in series with all circuit so I can open and close the circuit.
Simulate the circuit in Tinkercad
Development/Implementation Process
Explain the development/implementation process of your assignment. How did you use the machine/tool to manufacture or implement the design of your assignment?
Build the circuit with the components using Tinkercad as a reference.
I connect the
Test the circuit and making sure it working
20220822_104001.mp4
The electrical circuit on a breadboard
Start cut the cardboard using a dimensions device.
Assemble the parts together.
Add the components to the model
20220822_141525.mp4The Final Result
20220822_141253.mp4Night Mode 🌙
Overcoming Challenges
What kinds of challenges or problems did you face while doing the assignment, tutorials, or exercises? How did you solve them? Did you ask for help from an instructor or peer? Please provide a link to the tutorial or article that you used to solve your problem (if any)
Depending on the design I need to reverse the direction of the gear motor, so I started searching for how to reverse the polarity of motor, I found a Youtube video explain how to do it with H bridge arrangement.
H bridge
Final Project
How can you use the skills and knowledge that you've acquired this week in your final project?
I can use many of components I used this week in final project like gear motor to move my project, wires to connect the components, and switches to open and off the project, etc.
WOW!
What is the coolest thing that you've learned this week? What is something that you will never forget from this week?
The best thing this week is Build a simple Sumo RC Car in lap and fight with it with other teammates.
Title of Media