Project Engineer (02/2023-Present) | Atlas Technical Consultants , Inc. | San Diego, California

• Proposal writing and developing project budgets.

• Project coordination and management.

• Budget management and invoicing.

• Work with younger staff on training and execution of projects.

• Planning and execution of subsurface exploration programs.

• Specification and interpretation of laboratory tests.

• 2-D and 3-D slope stability analysis, steady state and transient seepage analyses of slopes, levees, and embankments.

• Analysis and design of earth retention systems.

• Analysis of axially and laterally loaded drilled shafts and piles.

• Liquefaction triggering and settlement assessment.

• Ground motion selection and site response analysis.

• Writing technical reports and recommendations.

• Provide on-going consulting to clients.

Senior Staff Engineer (01/2022-02/2023) | Geosyntec Consultants, Inc. | Los Angeles, California

Senior Staff Engineer (01/2018-12/2020) ; Project Engineer (01/2021-01/2022) | Soil and Materials Engineers (SME) | Cleveland, Ohio

• Coordinate field exploration and laboratory testing.

• Log and classify soil and rock samples.

• Specify and interpret laboratory tests including Atterberg limits, grain size and hydrometer, permeability, consolidation, unconfined compressive strength, direct shear, unconsolidated undrained triaxial, consolidated undrained triaxial, and ring shear tests.

• Monitor instrumentation, and reduce and analyze piezometer and inclinometer data.

• Oversee field tests including SPT, CPT, Plate Load Test (PLT), and Infiltration Test.

• Perform slope stability analysis, steady state and transient seepage analyses of slopes, levees, and embankments.

• Analyze and design earth retaining structures.

• Analyze axially and laterally loaded drilled shafts and piles.

• Write technical reports and recommendations.

Geotechnical Engineer Intern (02/2017-05/2017) | Langan Engineering and Environmental Services, Inc. | New York City, New York

• Performed test pit inspections, soil classification and logging, and vibration monitoring data analysis.