In this project, we scaled up our bedrooms using correct measurements and added automation to make our living space more eco-friendly and comfortable. My individual driving question is "How can we redesign a bedroom using automation and Feng Shui to make it more eco-friendly?" It connects to SDG 9 (Industry, Innovation, and Infrastructure) because it uses simple, low-cost homegrown materials.
The driving question that I created for Project 1 is: How can I redesign my bedroom to be more sustainable using automation and logic? My driving question explores how I can make a automatic thing which is an automatic door to make the room more eco-friendly.
I will improve the driving question by, instead of using sustainable, using eco-friendly and writing the driving question in more detail, like how I am going to do it.
For this project, we worked on our own bedroom designs. I started by measuring my room so I could draw everything to scale. After that, I brought in what we learned in class, like scaling, Feng Shui, and automation flowcharts, to make my room a lot more comfortable and eco-friendly. To wrap it up, I put my work into slides and presented it to everyone in our class. I was pretty nervous before starting since it was our first formal presentation in this class, but it actually went quite well.
Class room layout
We measured the classroom as a group, but we drew the classroom by ourselves
Bedroom layout (before)
I measured all the furniture and labeled all dimensions in my bedroom
Bedroom layout (after)
I use the skill of feng shui in my bedroom that we learned in class
Automation logic diagram
I decided to create an automatic door closer that when it detects you are going to close the door, it'll start a gap time.
This is the presentation I made for project 1.
I measured all my bedroom furniture carefully to draw an accurate scaled floor plan. Then, I used Feng Shui to rearrange the layout and designed a logic diagram for an automatic door closer. My logic diagram shows how a sensor detects whether you are going to close the door or not; if yes, it'll start the gap time to prevent your door from slamming.
During my rehearsal presentation, Ailsa and Lianne told me to speak louder and slow down. I practiced presenting at home to improve my voice projection and clarity. This helped me present more confident infornt of the class.
What I learned in this unit helps me in math class, where we are doing a project to build a 3D model of a space. I can apply the Feng Shui layout principles and scaling skills I practiced here to organize that 3D space better and make the floor plan more balanced and practical.
Unit 2: We space
In Unit 2, we created a floor plan of our classroom and redesigned it using science and art to make a more comfortable learning space. We used coding and logic diagrams to build an automated whiteboard cleaner and applied color palettes and room layout to improve the environment. It connects to SDG 9 (Industry, Innovation, and Infrastructure) because it uses simple, low-cost homegrown materials.
Class Driving Question: How can we use scientific principles to design sustainable environments?
Group Driving Question: How can we use automation and art concepts to make our classroom a comfortable environment for us to learn?
These two driving questions connect because we use scientific principles, like coding and logic diagrams, to build our automation, while applying art principles, like color palettes and room layout, to create a comfortable, eco-friendly classroom design.
Before our redesign, the classroom layout had poorly matched colors and rigid desk arrangements. The spatial layout was underutilized, leaving very little open space or flexibility for students to relax, collaborate, or take study breaks comfortably.
In our updated floor plan, we rearranged the student desks and created a dedicated leisure reading corner with bean bag chairs and a small table. This layout improves visual harmony, creates a more comfortable environment, and optimizes spatial flow for better air circulation.
Table: Replaced the wooden table with the green Kartell Bubble Club Table to match our color theme and increase durability.
Chairs: Replaced hard plastic chairs with Alfi High Back Chairs to give students better back support.
Curtains: Switched white cotton curtains to Light Blue Linen Curtains, which are lighter and better suited for Taiwan's hot climate.
Automation Logic
In this part of the code, void setup() sets up our timer and magnet sensors as inputs and the whiteboard eraser as the output. Then, in void loop(), the if statement checks if both sensors are triggered at the same time (HIGH). If they are, the whiteboard eraser turns on to start cleaning. If either sensor isn't triggered, the else block runs and keeps the eraser turned off (LOW) so it doesn't run when it shouldn't.
A color palette is a technique that many designers use to create the specific feeling and vibe they want people to experience when entering a room. In my design, I chose to work with the tetradic color concept using warm golden yellow, medium magenta, Royal Blue, and mint green. I selected a tetradic palette because it brings a vibrant energy while still maintaining a strong sense of harmony. Together, these four colors help create an inclusive, positive, and inspiring environment that supports good learning habits, showing how strategic color choices can transform a classroom into a more welcoming and dynamic space for everyone.
Lowering Costs: Our design cost around 5,000 NTD in total. Next time, we would look for cheaper materials so we can save money while keeping the classroom comfortable.
We should get feedback earlier from our classmates and teachers so we can catch problems sooner and make our classroom layout and automated eraser work even better for everyone.
We measured all of the furniture and room dimensions in our classroom carefully to draw an accurate scaled floor plan. Then, we rearranged the layout to create a dedicated reading area and designed a logic diagram for an automatic whiteboard cleaner. My logic diagram shows how a timer and magnetic sensors detect whether the board needs erasing; if the conditions are met, it triggers the motor to slide across and clean the whiteboard automatically.
Our group worked well together by dividing the tasks based on our strengths. For example, Lianne wrote the code for our automated eraser, while I worked on parts of the material list and wrote the introduction. When we shared our ideas with classmates and teachers, they gave us feedback on safety and spatial layout. Based on their suggestions, we added an emergency stop button to make the eraser safer and adjusted our classroom layout to include a comfortable leisure reading space.
From Unit 1 to Unit 2, I grew a lot in how I handle bigger design projects and work with my group. Back in Unit 1, I was only focusing on my own bedroom layout, but in Unit 2, I learned how to use Floorplanner to map out and redesign our whole classroom together. I also got way better at mixing art concepts, like color palettes, with technical stuff like logic diagrams and code to make our classroom both smart and cozy.
Science: We used scientific principles like coding, hardware inputs and outputs, and sensor logic diagrams to design and build our automated whiteboard cleaner.
Art: We applied art principles like color palettes, room balance, and spatial layouts to redesign our classroom into a comfortable and harmonious learning environment.
Exhibition project
Introduction
In this exhibition project, our group decided to redesign the Rooftop Garden at the Taipei Performing Arts Center. We want to redesign it because it's an ecosystem, and we think the rooftop garden's floor plan is too complicated. At the same time, it might be pretty hard to clean because of the shape of the garden; that's the reason why we want to redesign that space.
Google survey feedback
In the survey, we asked people in our class what they think about the rooftop garden. For example, we asked what some pros and cons might be of having a rooftop garden in the city. And then, we organized their answer, so when we're working on our project, we can use some other's people ideas when redesigning.
We almost finished the project, including the floor plan before the redesign. We also came up with an idea of what we're going to automate on the rooftop garden. What we are doing right now is we haven't thought of how we're going to redesign the garden.
My other four teammates and I work pretty well together even though we're still not really familiar with each other. An example of how we collaborate was when Michelle and Jayden were busy working on the automated part, Lenna and I were working on the floor plan, and Claire was working on the mood board. We divided the work so we could finish our work faster, so we didn't have to rush before the deadline.