A. Introduction

Metal roofing is one of the popular choices to choose among popular alternatives. Why should you go for it? Besides durable, it will enhance the beauty of your roof and minimize energy consumption. Thus, it is one of the prime solutions to be considered for cost reduction. In terms of aesthetics, an individual can give its preferences to style, texture, and color. How can you evaluate the best commercial roofing contractors in Chandler to get it done?

You can increase efficiency by installing metal roofing and adding style to your area. Either choose professional contractors to ensure quality work or follow the below steps to get it done through DIY methodologies. Let’s discuss this.

B. Preparing your Roof

• Calculate a section of your roof to calculate dimensions: Consider one section of your roof and start calculating the length, rise, and width. Measure the dimensions and procure materials. Calculate the distance of the roof from the highest point to the lowest.
• Measure slope factor: Calculate the slope factor which is also called the rise-over-run. It is the ratio of the distance up and distances across. Distance up is known by ‘rise’ while the distance across by ‘run’. Use the formula: square root of rise2 + run2 and divide the result by run3.
• Calculate area: Multiply the measured area with the slope factors to calculate the slope factor form. Thus, you can calculate the area in feet to be covered. Add each section to calculate the total square footage. You have to continuously repeat the process on each section of the roof.
• Material collection: As per the area of your home, you do need to order materials. Besides material procurement, you also have to choose a garbage can, a staple gun, drill bits, roofing nails, roofing screws, wood screws, and self-sealing, self-drilling wooden screws.
• Replace old roofing: Though you can start the installation work on shingles, yet the professionals advise to remove the old shingles.
• Repair: After removing the old shingles, inspect the exposed area. Fix the damage made to the insulation and ventilation.
• Add layers to insulate: Adding the insulation layer will block the moisture between the sheathing and the metal roof. You can cover the roof by using the roofing felt. Use a staple gun to secure it. After covering the area, use a breathable membrane to layer it.

C. Installing Metal Roofing

• Edging installation: Cover the roof perimeter by edging that consists of metal strips. You can easily secure the flashing by using the nails to cover the edge of the gutter. Make sure that it will overlap the edge of the gutter.
• Add metal panels: Work in order from the longest peak to eave distance. Take a metal sheet and place it on the roof.
• Add flashing: It is a metal trim that resembles with eave flashing, except you have to place over joints completing sections.

Now you can do the finish. Are you looking for the best professionals for commercial roofing in Chandler, AZ? Visit our website at www.zonaroofingaz.com.