Embedded Files
Globe AT HOME Prepaid WIFI
Globe AT HOME Prepaid WIFI
ZLT S10G Firmware 2.10.1 Openline
APPS Needed: Download and Install to your Phone
Zarchiver - for extracting zip file
Awebserver - for getting your Default Gateway 192.168.254.***.8080
Text Editor - for editing files from extracted zip folder
Download LINKS for APPS HERE
ZLT S10G 2.10.1 Openline Codes (ZIP File)
Contents:
at_ctl (no need to edit)
zlt.sh (edit via text editor and input your gateway)
zlt.ph (edit via text editor and input your gateway)
Download zip file and extract to your Phone (Check in your Extracted folder)
Download LINK ZIP FILE HERE: password: zlts10g
PROCESS
In your Smart Phone (Android) simply switch to "airplane mode" and turn on WIFI.
Plug now your Globe at HOME Prepaid Wifi and connect to your smart phone.
Open any browser in your phone and input " http://192.168.254.254/S10Gexport_sys_config.bin " without quotes.
Step 3 will download your original config file for "back up purposes" only.
Go back to your browser and input 192.168.254.254 and login with default user (user) and @l03e1t3 (password)
Go to System Settings and click on Restore Factory Settings and login again as in step 5 after reset.
Open Awebserver app as shown below and follow along, do not close the app until you restart zlt s10g
Open Awebserver app and click START
Copy the address according to your device
Tap on 3rd Icon (SQL Server) and click Start
Go back to WEB Server after SQL started
Get ready to upload at_ctl, zlt.sh & zlt.php
Edit address via text editor before you upload
HOW TO EDIT THE ZLT.SH and ZLT.PHP via TEXT EDITOR BEFORE UPLOADING TO AWEBSERVER APP
8. Go to your extracted folder and open zlt.sh file via text editor and input the address that was generated in Awebserver app, then click SAVE.
9. Go to your extracted folder and open zlt.php file via text editor and input the address that was generated in Awebserver app, then click SAVE
10. Once you're done in steps 8 and 9, go back to your Awebserver app and upload all files one by one and click OK once you see the pop-up message as shown.
11. After uploading the files, open a new tab in your phone browser and paste one by one and click the enter key in your keyboard to download
http://192.168.254.184:8080/at_ctl
http://192.168.254.184:8080/zlt.sh
http://192.168.254.184:8080/zlt.php?
Again make sure to replace the "red highlight numbers" as per generated in your Awebserver app.
12. Do the same with zlt.sh and zlt.php? and hit the enter key (no download pop up but must show a bracket)
13. Make sure that after zlt.php? when you hit the enter key you should only see this } bracket icon with the URL changed to goform/goform...
14. if you see {"result":"failure"} means you accidentally closed the Awebserver app, so be sure to start the services running in step #7 (no need to repeat to upload the files) and repeat 11 to 12 steps, check also if you are logged in to your globe account (step 5)
15. Once you repeat and come up without errors and only have the bracket then you can login again to 192.168.254.254 and FACTORY RESET
16. Insert a new sim card with a different network and you should see a different logo instead of the default GLOBE in your dashboard.
This was done with the default sim that was already deactivated that is why No service and No Signal
Globe AT HOME PREPAID WIFI ZLT S10G 2.10.1 Firmware Version
17. Using a Smart Rocket Sim card and locking to Band3
18. To get Full Admin Access instead of logging with user and @l03e1t3, use admin admin instead to get full features and hidden settings like APN
Device Settings>Internet Settings
Good luck! If you encounter errors on last part like "failure", simply check if you are logged to your Globe account in 192.168.254.254 then close and open Awebserver and start those services both in web server and sql server then download the ac_ctl, zlt.sh, and zlt.php?
Restore Factory settings if done successfully.
No need to have load or internet connection, just purely connect your phone to ZLT S10G via WIFI and follow the process. You only need internet connection when downloading the tools and code.
Tested only with ZLT S10G Firmware 2.10.1 so don't try if you have a different firmware.
SUMMARY:
Plug ZLT S10G and connect with your phone via WIFI (phone in airplane mode)
Backup the config file by pasting http://192.168.254.254/S10Gexport_sys_config.bin in your phone browser
Log in to 192.168.254.254 with user @l03e1t3
Run services in Awebserver app and get the address 192.168.254.***.8080
Go to extracted files and open zlt.sh and zlt.php via text editor and change the address (then click save)
Go back to Awebserver app and upload one by one ac_ctl, zlt.sh, and zlt.php
Open a new tab in your phone browser and paste the following one by one and click download (check your address and replace ***)
http://192.168.254.***:8080/at_ctl
http://192.168.254.***:8080/zlt.sh
http://192.168.254.***:8080/zlt.php?
Factory Reset ZLT S10G
Insert a new sim card (different network)
Customize APN, passwords, SSID etc
That's it! Hope you were able to follow. Share this if you find it helpful! Thanks!
Donations are Welcome 😍💕
Donations are Welcome 😍💕
Thank You! 😍
#ZLTS10G_Openline #GlobeATHOMEPREPAIDWIFI #Globe #Firmware2.10.1 #AdminAccess #APN #BandsLocking #Openline
Page updated
Google Sites
Report abuse