How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-27 · 7 min read · Independent comparison
If you want to toggle between two audio inputs at your desk and kill the signal with a single button press, choose Zeroffi 3.5mm; if you need a pocket-sized aluminum switch that flips between two headphones or two sources with a satisfying mechanical toggle, choose Cubilux 3.5mm.
• Zeroffi 3.5mm — biggest strength: a bi-directional 2-in-1-out / 1-in-2-out design plus a one-touch mute button and an adjustable volume knob, so you can silence or trim the signal without touching your source device.
• Zeroffi 3.5mm — biggest trade-off: it's built around 3-segment earphones and explicitly does not support four-segment (TRRS) headphones, so mic-equipped headsets are a problem.
• Cubilux 3.5mm — biggest strength: a full aluminum enclosure with an anti-slip base, a crisp mechanical toggle that shows which channel is live, and two 3-foot shielded TRS cables in the box.
• Cubilux 3.5mm — biggest trade-off: it's a passive circuit with no mute and no volume control, and its own documentation notes that powered speakers left deselected can hum from the floating input.
• Who each pick is for: Zeroffi for the desk user who wants mute and volume control in the chain; Cubilux for the traveler or minimalist who wants a tiny, sturdy, no-fuss A/B box.
The Zeroffi 3.5mm is a small black selector box — roughly 2.6 x 2.5 x 1.1 inches — that handles two directions of traffic. In one configuration you feed two audio sources into it and send one output onward; in the other you feed a single source in and route it to one of two outputs. The point is that you stop yanking cables in and out of your gear every time you want to change what's playing or where it's playing. That constant plugging and unplugging is exactly the wear-and-tear the design is meant to spare your jacks.
What sets it apart from a plain A/B box is the control surface. There's a one-touch mute button, which is genuinely useful if you need instant silence — a call comes in, someone walks into the room, you're mid-game and want to cut your mic without killing the audio you're hearing. There's also an adjustable volume knob. Read that carefully, though: Zeroffi states the knob controls output volume for the speaker and headphone only, not microphone volume. And there's a specific note that you can mute your mic while still hearing others during games or meetings, which tells you the intended use case is voice chat and conferencing as much as music.
Who should buy it: someone with a fixed desk setup, two sources (say a PC and a console, or a PC and a DAC), and a habit of switching between them. Also anyone who wants a mute button within arm's reach rather than on a keyboard shortcut.
Cubilux 3.5mm: Who It's For
The Cubilux 3.5mm is the same idea in a much smaller, much harder shell. It measures just 1.65 x 1.14 x 0.51 inches and is built from a full aluminum enclosure with an anti-slip pad underneath so it stays put when you flick the switch. That switch is mechanical and passive — flip left for the left port, right for the right port — and it gives you clear tactile feedback about which channel is active. No power adapter, no drivers, no software. You plug in and go.
Two details make it unusually practical. First, it ships with two 3-foot 3.5mm TRS shielded audio cables, so you're not hunting for a second cable before you can use the thing. Shielding matters here: it's there to keep transmission stable and cut down interference on short runs. Second, Cubilux documents its TRRS behavior honestly. It can switch TRRS signals including microphone input — but you need TRRS-to-TRRS cables, which aren't included, and mixing TRS and TRRS connections can make your computer prioritize the TRS signal. That's a real limitation, not a dealbreaker, and it's better to know it before you buy.
The other honest caveat comes straight from Cubilux's own notes: because the circuit is passive, a powered speaker that's been deselected is left in a floating, unconnected state, and sensitive powered speakers can pick up interference that shows up as hum. The company positions this device primarily for headphone switching rather than speaker switching.
Who should buy it: anyone who wants to share one pair of headphones between two devices, or toggle between two headsets on one source, especially in a travel bag or on a small desk. The aluminum body and included cables make it the tidier out-of-the-box pick.
Who should skip it: if you want a mute button or any volume control, this box doesn't have one. And if your plan is to switch between powered desktop speakers, the documented hum issue is worth weighing.
Side-by-Side: Which Should You Choose?
• Best for volume trimming at the switch → Zeroffi 3.5mm. Its adjustable knob controls speaker and headphone output level (not microphone level).
• Best for portability → Cubilux 3.5mm. At roughly 1.65 x 1.14 x 0.51 inches it's a fraction of the Zeroffi's bulk.
• Best build feel → Cubilux 3.5mm. Full aluminum housing plus an anti-slip base is a more premium-feeling package than a plastic-style box.
• Best for TRRS / mic-equipped headsets → Cubilux 3.5mm. It explicitly supports switching TRRS audio including microphone, provided you supply TRRS-to-TRRS cables.
• Best for 3-segment earphones only → Zeroffi 3.5mm. It's purpose-built for 3-segment plugs and says plainly that four-segment headphones aren't supported.
• Best for powered speakers → Zeroffi 3.5mm. Cubilux documents a floating-input hum when a deselected powered speaker is connected; Zeroffi makes no such warning.
• Best out-of-the-box completeness → Cubilux 3.5mm. Two 3-foot shielded TRS cables are included; Zeroffi's listing doesn't state cables in the box.
• Best warranty coverage → Zeroffi 3.5mm. It carries a stated 365-day warranty versus Cubilux's 18-month manufacturer warranty — read both terms yourself and decide which structure you prefer.
If I were buying for my own desk, I'd take the Cubilux 3.5mm. The aluminum shell, the anti-slip pad, the clear mechanical toggle, and the two shielded cables in the box make it the cleaner, more durable-feeling answer to "switch headphones," and it's the one that works with mic-equipped TRRS headsets if I ever need that. I'd only switch my recommendation to the Zeroffi 3.5mm if mute and volume control mattered more to me than size and build — that mute button is a genuinely nice thing to have in an online meeting or a game. In my opinion, most people searching for a headphone switcher want exactly what the Cubilux does, and the Zeroffi is the pick for the desk-control crowd.
FAQ
how to switch headphones left right
On a passive selector like the Cubilux 3.5mm, the mechanical toggle flips between the left and right ports — left activates the left port, right activates the right. That's a channel/port selection, not a stereo left-right balance swap. Neither device here adjusts left/right audio balance within a single signal.
Connect each device to one of the two input ports and your headphones to the output, then use the A/B selector. The Zeroffi 3.5mm does this via its 1/2 input selector and bi-directional design; the Cubilux 3.5mm does it with its toggle switch. Both are passive, so no power or software is involved with the Cubilux, and Zeroffi's box needs no separate power either.
how to switch headphones to headset windows 11
Windows 11 handles the software side — you pick the output device in the sound settings. The hardware side is what these boxes do: they let two sources or two headsets share one jack without replugging. Note that for a mic-equipped headset, the Cubilux 3.5mm supports TRRS switching but requires TRRS-to-TRRS cables, while the Zeroffi 3.5mm is designed for 3-segment earphones and doesn't support four-segment headphones.
how to switch headphones to speakers on computer
Run your computer into one input and route to the speaker and headphone ports as your setup allows. Cubilux specifically warns that a deselected powered speaker sits in a floating state and can hum, because the circuit is passive and the device is really intended for headphone switching. If speaker-to-headphone switching is your main goal, the Zeroffi 3.5mm has no such documented caveat.
If you're weighing these two, check the current price on Amazon before you commit — the page has a button for that — and match the spec sheet to your actual plugs. That's the whole decision.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Ugreen USB vs TECKNET Open Ear Headphones, Avantree Alto Clair vs Gixxted Headset, GEEKRIA Replacement Ear Pads vs G GVOEARS Replacement Ear Pads, AGM OpenBuds 1 vs GTbeans Open Ear Earbuds: Open Ear TWS