We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-25 · 8 min read · Independent comparison
If you want a no-tools, seconds-long refresh for a pair of iJoy Logo ISO over-ear headphones, choose YunYiYi Replacement Earpad; if you need a proper pry-tool kit with a protein-leather outer layer for Beats Solo 2 or Solo 3, choose L LTGEM Replacement Ear Pads. Those two sentences settle ninety percent of this decision, because these pads are built for two different headphones and two different kinds of owners. The rest of this page is me showing you why, spec by spec, so you can stop second-guessing and get back to actually listening.
• YunYiYi's biggest strength: a genuinely tool-free, two-step install with a memory foam cushion designed for the iJoy Logo ISO over-ear headset — the whole swap takes seconds.
• YunYiYi's biggest trade-off: it fits one headphone family only, and the package is just the pair of pads — no pry tool, no extra hardware, nothing else in the box.
• L LTGEM's biggest strength: a complete kit — left and right pads plus a dedicated pry bar tool for damage-free removal of the old cushions, wrapped in a skin-friendly synthetic leather outer layer.
• L LTGEM's biggest trade-off: it is locked to Beats Solo 2 and Solo 3 on-ear models, and the brand itself states it will not work with any Beats Studio over-ear headphones.
• Who YunYiYi is for: iJoy Logo ISO owners who want the fastest possible comfort and isolation upgrade.
• Who L LTGEM is for: Beats Solo 2 or Solo 3 owners who want a full refresh kit with a removal tool included.
The YunYiYi Replacement Earpad is a black memory foam cushion set made specifically for the iJoy Logo ISO Over Ear Bluetooth Headphones STL. That compatibility line is the whole story. If that is your headphone, this pad was tailored for it; if it is not, nothing else on this page matters for you.
What it does best is speed. The install is a two-step, no-tools process — the brand describes it as seconds from start to finish, and nothing in the design contradicts that. There is no pry bar in the box because you are not supposed to need one. The pad simply goes on, and you have what amounts to a new headphone.
The second thing it does well is isolation. The memory foam cushioning is built to conform to the shape of your ear, which is what creates the seal — and that seal is what keeps your music in and your surroundings out. The brand frames the result as a noticeable jump in perceived sound quality, and the logic holds up: a worn-out pad leaks, a sealing pad does not. The memory foam also returns to its original shape when the headphones are not in use, which is the reason this kind of padding tends to outlast cheap open-cell foam. The brand leans on that point hard, describing it as unmatched support and longer pad life.
Who should buy it? iJoy Logo ISO owners whose current pads are flat, flaking, uncomfortable, or simply leaky. If your ears ache after an hour, or you can hear the room over your music, this is the fix.
L LTGEM Replacement Ear Pads: Who It's For
The L LTGEM Replacement Ear Pads are built exclusively for Beats Solo 2 and Beats Solo 3 on-ear headphones. The brand is unusually blunt about this, and it is worth repeating in their spirit: these are for the Solo on-ear line, and they are not compatible with any Beats Studio over-ear headphones. If you own Studios, stop here — this is not your product, no matter how good the rest of this sounds.
For Solo owners, though, this is a thoughtfully assembled kit. You get a pair of pads, left and right, plus a specialized pry bar tool whose only job is removing your old pads without gouging the plastic. That detail matters more than it sounds. Old pads are usually stuck down, and improvising with a kitchen knife or a fingernail is how people scratch their headphone housings. Having the right tool in the box turns a nervous job into a two-minute one. The new cushions align and snap into place.
The materials are where L LTGEM makes its case. The core is high-resiliency memory foam that contours to your ear, and the outer layer is a premium, skin-friendly synthetic leather — the brand's own framing — chosen because it resists sweat, peeling, and everyday wear. That is the honest answer to the single most common failure mode of on-ear pads: the coating cracks and flakes long before the foam gives out. A leather-look outer layer that tolerates sweat is the right call for anyone who wears their Solos on commutes, in the gym, or through a hot summer.
The audio claim is the same acoustic-seal argument you see on every good pad, and it is a real one. Memory foam that adapts to your ear shape closes the gap between pad and head, which reduces outside noise and cuts sound leakage. On a Solo, which is an on-ear design and therefore relies even more heavily on clamping pressure and pad condition, a fresh sealing pad is often the difference between thin and full-sounding.
Who should buy it? Beats Solo 2 or Solo 3 owners with cracked, shiny, deflated, or sweat-damaged pads who want the complete kit — pads plus tool — and a leather-style outer surface.
Side-by-Side: Which Should You Choose?
• Best for iJoy Logo ISO owners → YunYiYi Replacement Earpad. It is the only one of the two made for that headphone.
• Best for Beats Solo 2 / Solo 3 owners → L LTGEM Replacement Ear Pads. Purpose-built, with the pry tool included.
• Best for the fastest possible install → YunYiYi Replacement Earpad. Two steps, no tools, seconds of work.
• Best for a complete, damage-free refresh → L LTGEM Replacement Ear Pads. The included pry bar is the difference between a clean swap and a scratched housing.
• Best for sweat and daily-wear resistance → L LTGEM Replacement Ear Pads. The synthetic leather outer layer is explicitly designed to resist sweat and peeling.
• Best for maximum comfort and isolation at minimum effort → YunYiYi Replacement Earpad. Soft memory foam tailored to the headset, with no accessories to fiddle with.
• Best for wide headphone compatibility → neither. Each pad is locked to a specific headphone family, so match the pad to the model you actually own before anything else.
• Best if you are unsure which headphone you have → check the model printed on your headband first. Getting this wrong is the only real mistake available here.
If I owned Beats Solo 2 or Solo 3 headphones, I would buy the L LTGEM Replacement Ear Pads. In my opinion, the included pry tool and the sweat-resistant synthetic leather outer layer make it the more complete, longer-lived solution for a headphone that gets worn daily, and the on-ear design benefits enormously from a fresh acoustic seal. If I owned the iJoy Logo ISO Over Ear headset instead, I would buy the YunYiYi Replacement Earpad without a second thought — it is tailored to that exact model and installs in seconds with no tools. The deciding factor is not which pad is "better." It is which headphone is sitting on your desk. Check the current price on Amazon once you know your model, and buy the one that matches.
can you sleep with over ear headphones
You can, but neither of these pads changes the physics of it. Both are replacement cushions for specific headphones — YunYiYi for the iJoy Logo ISO over-ear headset, L LTGEM for Beats Solo 2 and Solo 3 on-ear models — so comfort while lying down depends on the headphone's shape and clamping force, not the pad alone. Side sleepers will find any on-ear or over-ear headphone presses against the ear.
how to wear over ear headphones
The earcups should sit over your ears with the pads sealing against your head, not pinching the top of your ear. The headband goes across the crown, adjusted so the clamping pressure feels even on both sides. A memory foam pad like either of these conforms to your ear shape once it warms up, which is what creates the seal that improves isolation and reduces leakage.
how to wear over ear headphones properly
Center each cup over the ear, then shorten or lengthen the sliders so the headband rests flat on top of your head rather than tipping forward or back. If one side feels tighter, adjust that side rather than bending the band. With a fresh pad, expect a slightly firmer feel for the first few wears before the memory foam settles into your ear shape.
how should over ear headphones fit
Snug but not painful. The pads should make full contact with the skin around your ear, because that contact is what seals out noise and keeps sound from leaking. If you can slide a finger under the pad, the seal is broken and isolation suffers. If your ears ache after twenty minutes, the clamp or the pad is too tight — a worn, flattened pad is a common cause of both problems, which is exactly what replacements like these address.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Elecphbo Replacement XT SE vs L LTGEM Replacement Ear Pads, YOCOWOCO Replacement Ear Pads vs Voarmaks Flats Ear Pads, WC Freeze Nova Pro vs Duyfioa Replacement Ear Pads