How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-02 · 6 min read · Independent comparison
• Yunsailing 20 — biggest strength: You get 20 complete wired headsets in one box, each with a mic, a 3.5 mm plug and an adjustable, cushioned on-ear design built for shared or bulk use.
• Yunsailing 20 — biggest trade-off: It is wired only in practice (the 3.5 mm cable is the connection), with no active noise cancellation and no rechargeable battery — and it is intended for ages 14 and up.
• EKSA 2.4GHz — biggest strength: It is genuinely wireless across three modes (2.4GHz dongle, Bluetooth, or 3.5 mm wired) with a 52-hour battery, a rotatable noise-canceling mic and a 50 mm driver.
• EKSA 2.4GHz — biggest trade-off: It is a single headset, not a bulk set, it cannot be used while charging, and its wireless mode does not work with Xbox controllers (3.5 mm wired only there).
• Who each pick is for: Choose Yunsailing 20 if you are outfitting many people at once on a tight per-seat budget; choose EKSA 2.4GHz if one person needs freedom from cables on a laptop.
The Yunsailing 20 is a bulk classroom and office solution, and it says so plainly. One purchase delivers 20 wired headsets in mixed colors, which is the whole point: getting a room full of students or call-center staff equipped without hunting for 20 separate products. Each headset uses a 3.5 mm jack, so it plugs straight into a desktop, laptop, tablet, smartphone, MP3 player or gaming system with no installation step. That plug-and-play simplicity is genuinely valuable in a school or shared-workstation setting, where you do not want to troubleshoot drivers or pairing every time someone sits down.
On the build side, the shell is ABS with a PVC cable roughly 1.5 meters (about 4.92 ft) long, which is enough slack to reach a laptop on a desk without yanking. The ear pads are cushioned and the headband is adjustable, so it fits a range of head sizes, and the over-ear placement plus a 32-ohm impedance and a 20 Hz–20,000 Hz dynamic driver make it a straightforward listening-and-speaking tool. There is a remote inline volume control, but no active noise cancellation — this is a device for clear, basic audio, not isolation.
EKSA 2.4GHz: Who It's For
The EKSA 2.4GHz (model E5BT) is the opposite philosophy: one headset, built to move between devices wirelessly. Its headline feature is a 2.4GHz lossless connection that reaches up to about 49 feet in open space with latency of 20 ms or less — the kind of responsiveness that matters for gaming and for lag-free voice in video calls. It supports three connection paths: the 2.4GHz USB dongle, Bluetooth (version 5, roughly 15 meters of range), and a 3.5 mm wired cable. That flexibility is its real selling point for laptop users who also game on a console or listen on a phone.
Audio comes from a 50 mm dynamic driver with a claimed 33% extra sound-effect boost, tuned (in the manufacturer's framing) for 3D stereo so you can place footsteps and directional cues. The microphone is a 120° rotatable omni-directional unit with noise reduction, so you can angle it out of the way when not talking. Controls sit on the ear cup — indicator light, Bluetooth, 2.4G, power, mic on/off, volume, and a USB-C port for charging or 3.5 mm — which keeps you from fumbling for a remote.
Comfort leans on protein-leather over-ear pads and an adjustable headband, and the specs list passive noise cancellation (the physical seal of the cups, not active circuitry). Battery life is the standout number: 52 hours of use, 120-plus hours standby, and a 3-hour charge time. There are limits worth knowing: it cannot be used while charging, the USB-A dongle must be paired with the USB-C dongle to work (the USB-C dongle works alone), Xbox wireless is unsupported (3.5 mm wired only), and the very first pairing needs more than 10 seconds. It also carries a two-year warranty.
Buy it if you want one headset for laptop work, gaming and calls without cables. Skip it if you need a bulk set for many people, or you must play and charge at the same time.
Side-by-Side: Which Should You Choose?
• Best for equipping a group → Yunsailing 20. Twenty headsets in one box beats buying singles for a classroom or lab.
• Best for battery life → EKSA 2.4GHz. A 52-hour runtime with 120-plus hours standby and a 3-hour charge.
• Best for low-latency gaming and voice → EKSA 2.4GHz. Sub-20 ms latency and a 50 mm driver with a rotatable noise-reducing mic.
• Best for zero-setup simplicity → Yunsailing 20. Plug the 3.5 mm jack in and it works — no pairing, no charging.
• Best for mixed devices (phone, tablet, console) → EKSA 2.4GHz. Three connection modes cover more hardware; just remember Xbox wireless is not supported.
• Best for shared or high-turnover use → Yunsailing 20. Wired, no battery to manage, and a durable ABS-and-PVC build.
• Best for one person who wants comfort over long sessions → EKSA 2.4GHz. Protein-leather over-ear pads and an adjustable headband.
For most people reading a comparison about wireless headphones for a laptop, I would buy the EKSA 2.4GHz. In my opinion, the 2.4GHz dongle, Bluetooth 5 and 3.5 mm wired option give you the flexibility a laptop user actually wants, and the 52-hour battery plus the rotatable noise-canceling mic make it a true all-rounder for work, calls and gaming. The Yunsailing 20 is the smarter pick only if your goal is outfitting many seats at once — it is a bulk wired tool, not a personal wireless headset. If cable-free convenience and long runtime matter to you, the EKSA wins; check the current price on Amazon before you decide.
how to connect wireless headphones laptop
On the EKSA 2.4GHz, plug the USB-C dongle (or the USB-A dongle attached to it) into your laptop and it connects over the 2.4GHz link; the first pairing takes more than 10 seconds. You can also use Bluetooth 5 or the 3.5 mm cable. The Yunsailing 20 is wired, so it simply plugs into the 3.5 mm jack.
how to add wireless headphones to laptop
For the EKSA, either insert the USB dongle for the 2.4GHz connection or put the headset in Bluetooth mode and select it from your laptop's Bluetooth list. Its Bluetooth range is about 15 meters and the 2.4GHz link reaches up to about 49 feet in open space. No drivers are needed for the Yunsailing 20, since it is a plug-and-play 3.5 mm device.
how to pair wireless headphones to laptop
Power on the EKSA and press the Bluetooth button to enter pairing, then choose it on your laptop; the first attempt needs over 10 seconds. For gaming-grade responsiveness, use the 2.4GHz dongle instead. If your laptop has no Bluetooth, the 3.5 mm cable always works.
how to connect wireless headphones to laptop windows 10
Open Windows 10 Settings, go to Bluetooth and other devices, turn on Bluetooth and add the EKSA E5BT; or just plug in the USB dongle and let Windows pick it up. The 2.4GHz mode is the lowest-latency option at 20 ms or less. The Yunsailing 20 needs no setup — connect the 3.5 mm plug.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Beats Studio Buds vs Amylove 6, headset stand, targeal USB C vs JIAMQISHI USB Headset, WUNIAK Charging Cable vs KTGEE Earbuds