Potentiostat
Model : BCS-915
8-channel multichannel Potentiostat
For battery research, supercapacitor, fuel cell, electrolyze, etc.
Voltage
- Range : 0 V to 9 V
- Control resolution : 150 μV
- Measurement resolution : 40 μV (18 bit)
- Accuracy : <±0.01% of value ±0.3 mV
- Slew rate : 3 kV/s
Current
- Max (continuous) per channel : ±15 A
- Ranges : 5: 10 A down to 1 mA
- Control resolution : Down to 80 nA
- Measurement resolution : Down to 20 nA (18 bit)
- Accuracy : <0.05% of value ±0.015% of FSR / <0.1% of value ±0.015% of FSR (1 A range) /
<0.3% of value ±0.04% of FSR (10 A range) FSR: Full Scale Range
- Parallel ability : Up to ±120 A with 8 channels
EIS
- 8 channel
- Range : 10 kHz - 10 mHz
Measurement
- Acquistion time : 1 ms
- Time base : 1 ms
Constant Temperature Chamber
Model : S-CTC150R1
For evaluating the thermal stability of various materials, not just batteries
Basic Specification
- Each max. temp. range : Max -25℃ - 150℃
- Operation temp. range : -20℃ ~ 120℃
Potentiostat
Model : VSP-3e
8-channel multichannel Potentiostat
For battery research, supercapacitor, fuel cell, electrolyze, etc.
Voltage
- Compliance : ±10V
- Control Voltage : ±10V adjustable / [0;20]V (standard) / up to 60V with FlexP0060, FlexP0160
- Voltage resolution : 5μV on 200mV range
Current
- Current ranges : 400mA to 1A (standard with [e] type board / down to 1nA (Low current))
- Max current : ±1A (continuous) / up to 800A with four FlexP0012
- Currnet resolution : 0.760nA / down to 76fA (Low current)
EIS
- Frequency range : 1MHz down to 10μHz
- EIS Quality Indicators : with [e] type board
Advanced
- Up to 8 channels
- Connection 2, 3, 4, 5 terminal lead
- Best acquisition time 200μs
- Stability control mode (7 bandwidths)
DC Power Supply
Model :DP30-03TP
3ch, DC power supply
For converting AC voltage to a stable DC voltage.
Voltage
- Main variable voltage : 0 ~ 30V
- Voltage resolution : 100mV
Current
- Main variable current : 0 ~ 3A (1ch & 2ch)
- Current resolution : 10mA
Power
- Output max power : 180W
- AC power input : 115V/230V ±10%, 5Hz/60Hz (Outside sellector switch)
Fluctuation
- Line fluctuation : ±0.02% + 2mV, +2mA for power source voltage change of ±10%
- Load fluctuation : ±0.02% + 5mV, 5mA for load variation of 0 to 100%
Signal Conditioning Amplifier
Model : SC-V010
For strain gauge & load cell.
Voltage
- Input : Full bridge type transducer(Load cell, Pressure etc.), 1/4, 1/2 strain gauge
- Output : 0 ~ ±10V
- Load impedance : -1.7kΩ <
Current(Option)
- Input : Full bridge type transducer(Load cell, Pressure etc.), 1/4, 1/2 strain gauge
- Output : 0 ~ 40mA
- Load impedance : 0 ~ 500Ω
Power
- DC + 18 ~ + 24V(Constant Voltage)
- Sensor supply power : 1V, 2V, 5V, 10V Regulated
Range
- Zero adjust range : ±100%(F.S.)
- Low gain adjust range : ±11%(F.S.)
Impedance
- Input impedance : ≤ 1010Ω
Data Logger
Model : GL840
20 channels in standard configuration, expandable up to 200 channels for analog input
Function
- Trgger, alarm function
- Pulse input function
- Calulation function
- Search function
- Back up recording data function
- Check-sum function(Verifies data file)
- Scaling function
Power source
- AC adapter : 100 ~ 240V AC, 50 / 60Hz (1 PC of adapter is attached as standard accessory)
- DC power : 8.5 ~ 24V DC (DC drive cable is required)
- Battery pack : Mountable two battery packs (battery pack : 7.2V DC, 2900mAh)
Measurement range
- Voltage : 20, 50, 100, 200, 500mV, 1, 2, 5, 10, 20, 50, 100V, and 1 ~ 5 F.S.(Full Scale)
- Thermocouple : 100, 500, 2000ºC
- RTD(Resistance Temperature Detector) : 100, 500, 2000ºC
- Humidity : 0 ~ 100% RH - using the humidity sensor
Micro Laser Distance Sensor
Model : HG-C1030
CMOS type
For EMC Directive compliance, FDA standard.
Specification
- Measurement center distance : 33mm 1.181in
- Measuring range : ± 5mm 0.197in
- Repeatability : 10μm 0.394mil
- Light source : Red semiconductor laser class 2(JIS / IEC / GB)
- Supply voltage : 12 ~ 24V DC ± 10% ripple P-P 10%
- Current consumption : 40mA or less(at 24V) / 65mA or less(at 12V)
Control output
- Maximum sink current : 50mA
- Applied voltage : 30V DC or less
- Residual voltage : 1.5V or less(at 50mA sink current)
- Leakage current : 0.1mA or less
Analogue output
- Analog voltage output : 0 ~ 5V(at alarm : + 5.2V) / impedance : 100Ω
- Analog current output : 4 ~ 20mA(at alarm : 0mA) / impedance : 300Ω or less
External input
- Invalid : + 8 ~ +V DC or Open
- Valid : 0 ~ + 1.2V DC
- Impedance : 10kΩ approx.
Closed Internal Circulating Safety Reagents(high-grade type)
Model : WJ-K140C-001
A rigid, strong iron frame with a sealed internal circulation
For storing safely by removing harmful gases by circulation.
Specification
- External specification : W1400 X D700 X H1950
- Internal specification : W1300 X D630 X 1500
- Frame : 1.2mm steel plate, epoxy powder coding
- Door : One door, toughened glass 5mm, enclosed door
- Shelf : Auto slide 10-step
- Filter : CWK1 composite filter 2SET
- Pan : High-function circulation pan 2EA
- Caster : Adjustment function caster 4EA
- Controller : 7-inch touchscreen
- Locking function : Close-up card reader. Electronic swing handle
- Power : 220V / 60Hz, 170W
Incubator
Model : WIG-105
Gravity-air flow preventing cross contamination of samples.
For microorganism culture, animal and plant cell culture, constant temperature, germination, etc.
Temperature
- Range & control resolution : room temperature + 5 ~ 70ºC; ± 0.1ºC
- Fulctuation & sensor : ± 0.2ºC at 37ºC, ± 0.3ºC at 50ºC, PT 100 sensor
- Variation :± 0.6ºC at 37ºC, ± 1.0ºC at 50ºC
Power
- Heater power : 300W
- Power supply : 1 Phase AC 230V, 50 / 60Hz
- Power consumption : 292.9W
- Energy consumption at 37ºC / at 50ºC : 63Wh / 152Wh
Specification
- Heat-up time : 25min to 37ºC, 40min to 50ºC
- Recovery time(door open 30sec) : 10min to 37ºC, 15min to 50ºC
- Shelves : 2 x PE-coated steel wire shelves included, total load 32kg (16kg per shelf)
- Internal dimensions(W x D x W, mm) : 485 x 410 x 535 mm
- External dimensions(W x D x W, mm), net weight : 635 x 595 x 841 mm, 59kg
- Packing size & gross weight : 731 x 710 x 1018 mm; 67kg
Portable Toxic Gas Air Purifier
Model : CAFU-02
Flexible type
For purifying the pollution sources by lab, offices, soldering, workplace, and so on.
Specification
- Noise : ≤ 55dB
- Air volume : 9 ~ 12 m/s
- Rating : 220V, 50 / 60Hz, 120W
Characteristic
- Urethane bearing wheel : Less noise, low power
- Easy filter replacement : Easy and simple filter replacement
- Alarming function : Alarming filter replacement time
- BLDC motor : Minimization of power consumption
- Easy handling : Easily move to any place you want
Filter standard
- Antibacterial PRE filter : Elimination of dust at the incoming part, antibacterial processing
- Main filter : TVOC + 0.3μm particle elimination, and sterilization processing
Cabinet Filter
Model : WJCC-VX
Equipment that neutralizes harmful gases and volatile organic compounds
generated inside the cabinet for the safety of researchers.
Size
- 490*305*288 mm
Moter
- BLDC Fan
Power
- 220 V
- 50/60 Hz
Filter
- CWK1 Filter
- WJC1 Device
Load Cell
Model : CMCS
Stainless Steel & Welded cover.
It is suitable for a wide range of testing and weighing systems
due to its compact size and high precision characteristics.
Specification
- Rated Capacity (R.C.) : 500 kg, 1, 2, 5, 10 t
- Rated Output (R.O.) : 2.0 mV/V ± 0.2%
- Nonlinearity : ≤ 0.03% R.O.
- Hysteresis : ≤ 0.03% R.O.
- Repeatability : ≤ 0.03% R.O.
- Creep : ≤ 0.03% in 20 min
- Zero balance : 1% R.O.
- Temperature compensation range : -10 ~ 70 ºC
- Allowable temperature range : -20 ~ 80 ºC
- Temperature effect on the output : ≤ 0.03% LOAD/10ºC
- Temperature effect of zero point : ≤ 0.03% R.O./10ºC
- Input Resistance : 350 Ohms ± 3.5 Ohms
- Output Resistance : 350 Ohms ± 5 Ohms
- Insulation Resistance : 2000 MOhms at 50 V DC
- Applied Voltage : 3 ~ 12 V (Recommended), 15 V (Maximum)
- IP Code : meets IP 68
- Allowable overload : 150% R.C
- Extreme overload : 300% R.C