How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a wireless, sweat-resistant neckband for calls, workouts and all-day wear, choose yi-shaney Headphones; if you need a wired, tunable in-ear monitor for critical listening, gaming and cable upgrades, choose TANGZU Wan'er S.G II.
• yi-shaney Headphones — biggest strength: a true wireless neckband with Bluetooth 5.0, a magnetic earbud design and up to 20 hours of music playback from a 280 mAh battery.
• yi-shaney Headphones — biggest trade-off: the cable is not shrinkable, the fit depends on the three included ear tip sizes, and the noise cancelling is active rather than isolation-based.
• TANGZU Wan'er S.G II — biggest strength: a refined 10mm PET diaphragm dynamic driver in an upgraded chamber, paired with a detachable 0.78mm silver-plated copper cable and patented Tang Sancai eartips.
• TANGZU Wan'er S.G II — biggest trade-off: it is a purely wired 3.5mm IEM, so there is no battery, no Bluetooth and no freedom from your device.
• Pick yi-shaney Headphones if you want hands-free calls, movement and cable-free convenience.
• Pick TANGZU Wan'er S.G II if you want the cleanest possible signal path and a cable you can replace or upgrade.
The yi-shaney Headphones are built around a 10mm dynamic driver with a 20 Hz – 20 kHz frequency range, combined with noise reduction technology and a built-in microphone. That combination tells you what this neckband is really about: voice. Hands-free calls, video meetings, podcasts and casual music listening are where a neckband with a mic and active noise cancellation makes the most sense. Bluetooth 5.0 keeps the connection stable at a rated range of up to 33 feet, so you can leave your phone on a desk and walk around a room without dropping the link.
The ergonomics are clearly aimed at long sessions. The neckband weighs just 0.05 lb, uses eco-friendly ABS and PC material, and carries an IPX4 sweat and splash rating. In practice that means a gym session, a run in light rain, or a full workday of wearing it around your neck won't be a problem. The magnetic earbuds are a genuinely useful touch — pop them apart and they hang around your neck instead of swinging loose or getting lost. Three extra ear tip sizes in the box help you dial in the seal.
Who should skip it? Anyone chasing maximum fidelity from a wired source. There is no headphone jack here, and the wireless signal path plus active noise cancellation means this is a convenience-first product, not a reference-listening one. If you already own a dedicated DAC or hi-res player, this neckband won't be the tool you reach for.
The TANGZU Wan'er S.G II takes the opposite approach: everything is invested in the acoustic chain. The headline is a 10mm single dynamic driver with a PET diaphragm, housed in an upgraded driver chamber that TANGZU says was refined over the first-generation Wan'er for better clarity, more natural tonality and lower distortion. The PET material is also hypoallergenic, which matters if you wear IEMs for hours and your ears are sensitive to certain materials.
The specs back up the "portable-friendly" claim. Impedance is a low 19Ω and sensitivity is 113.5 dB, with a 20 Hz – 20 kHz range — that's an easy load for a phone, a PC, a gaming console, a Hi-Res player like a HiBy unit, or even a high-current headphone amp. The 0.78mm flat 2-pin connector is detachable and the stock cable is silver-plated copper, so if the cable ever fails or you simply want to try something else, you swap it instead of replacing the whole earphone. The housing was reshaped through ergonomic study for a secure, fatigue-free fit with better isolation, and the patented Tang Sancai eartips use a SHAN filter zone design intended to smooth the sound path.
Who should skip it? Anyone who wants wireless freedom. This is a wired 3.5mm in-ear with button media controls and passive noise cancellation only — meaning it blocks sound by sealing your ear canal, not by electronics. It also weighs 200 g as a packaged item, so it's a sit-down, plug-in product, not a gym companion.
Side-by-Side: Which Should You Choose?
• Best for battery life → yi-shaney Headphones. 20 hours of music, 16–17 hours of talk time, 240 hours standby, roughly 1.5–2 hours to charge.
• Best for calls and voice → yi-shaney Headphones. Built-in mic plus noise reduction and active noise cancellation.
• Best for workouts → yi-shaney Headphones. IPX4 sweat/splash resistance and a 0.05 lb neckband.
• Best for sound quality potential → TANGZU Wan'er S.G II. A refined PET diaphragm driver, upgraded chamber and low 19Ω impedance for clean, easy amplification.
• Best for durability and repairability → TANGZU Wan'er S.G II. The 0.78mm cable is detachable and replaceable; the enclosure mixes metal, plastic and silicone.
• Best for gaming and desktop use → TANGZU Wan'er S.G II. A wired 3.5mm connection sidesteps Bluetooth latency entirely.
• Best for long listening sessions on a phone → TANGZU Wan'er S.G II. High 113.5 dB sensitivity and a low-impedance load mean most devices drive it without strain.
In my opinion, these two barely compete — they solve different problems. If your day involves calls, movement and sweat, I'd buy the yi-shaney Headphones; the magnetic buds, IPX4 rating and 20-hour battery are exactly what a neckband should offer. If your priority is fidelity from a phone, PC or handheld, I'd buy the TANGZU Wan'er S.G II, because a detachable silver-plated cable and an upgraded 10mm PET driver give you a cleaner, more upgradeable platform. Neither is "better" in the abstract — pick the one that matches where you actually listen.
what is 10mm driver earbuds
A 10mm driver means the speaker inside each earbud has a 10-millimeter diameter. Both products here use a 10mm dynamic driver with a 20 Hz – 20 kHz range, so the size is matched — the difference lies in tuning, chamber design and whether the signal arrives by wire or Bluetooth.
is 10mm driver good for earbuds
Yes. A 10mm dynamic driver is a common size that can move enough air for solid bass while staying small enough for an in-ear fit. In my opinion it's a sweet spot for portable listening, which is likely why both the yi-shaney neckband and the TANGZU Wan'er S.G II use one.
is 6mm driver good for earbuds
A 6mm driver is smaller and generally moves less air, so it tends to favor clarity over deep bass — but neither product here uses one. Both the yi-shaney Headphones and the TANGZU Wan'er S.G II specify 10mm drivers, so if you're comparing on driver size alone, these two are even.
does the TANGZU Wan'er S.G II work with a phone
Yes. It uses a standard 3.5mm jack with 19Ω impedance and 113.5 dB sensitivity, so it's easy to drive from a smartphone. Just check whether your phone still has a headphone jack or whether you need an adapter.
do the yi-shaney Headphones work while charging
The data sheet lists a 280 mAh battery, 1.5–2 hours of charging time and 20 hours of music playback, but it doesn't state whether the headset plays during charging. If that matters to you, verify it before buying.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: CVJ Vivian IEM vs syeindunce TRN Dolphin In-Ear: 10mm Driver, JLab Neon on-Ear vs EarFun K2: 40mm Driver Headphones, YINYOO KZ ZSN Pro vs SIVGA SM100: 10mm Driver Earbuds