Publications 

1.      Mittal, Y.G., Patil, Y., Kamble, P., Gote, G., Mehta, A.K., and Karunakaran, K.P., 2024. Metal Casting Using Soluble Pattern Produced via Additive Manufacturing. International Journal of Advanced Manufacturing Technology. (accepted)

2.      Patil, Y., Patel, A.K., Mittal, Y.G., Gote, G., Mehta, A.K., Karunakaran, K.P., Akarte, M., Ely, R., and Shinde, J., 2024. A Systematic Literature Review and Bibliometrics Using Visualization of Similarities for Patternless Sand Mold and Core Production. Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-12-2023-0434

3.      Mehta, A.K., Gote, G., Mittal, Y.G., Patil, Y., and Karunakaran, K.P., 2024. Powder Smoking Phenomenon in Electron Beam Powder Bed Fusion: A Comprehensive Review of Prediction, Monitoring and Mitigation Methods. Journal of Manufacturing Processes. https://doi.org/10.1016/j.jmapro.2024.07.141

4.      Mittal, Y., Patil, Y., Kamble, P., Gote, G., Mehta, A., and Karunakaran, K.P., 2024. Warpage Control in Thermoplastic ABS Parts Produced via Material Extrusion (MEX) based Fused Deposition Modeling (FDM). Rapid Prototyping Journal. https://doi.org/10.1108/RPJ-01-2024-0023

5.      Mittal, Y.G., Gote, G., Patil, Y., Mehta, A.K., Kamble, P., and Karunakaran, K.P., 2024. Investigations on Ironing Parameters in Screw Extrusion Additive Manufacturing (SEAM). Manufacturing Letters. (accepted)

6.      Patil, Y., Patel, A.K., Gote, G., Mittal, Y., Mehta, A.K., Singh, S., Karunakaran, K.P., and Akarte, M., 2024. Sawtooth Scanning Strategy for Additive Manufacturing. Rapid Prototyping Journal. http://doi.org/10.1108/RPJ-11-2023-0390  

7.      Kamble, P., Mittal, Y.G., Gote, G., Mayur Patil, and Karunakaran, K.P., 2024. A Mathematical Surface Roughness Model for Objects made by Material Jetting. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-024-00573-5

8.      Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., and Karunakaran, K.P., 2023. A Novel Analytical Model for Screw Extrusion of Thermoplastic ABS with Emphasis on Additive Manufacturing. Manufacturing Letters.  https://doi.org/10.1016/j.mfglet.2023.08.054

9.      Avegnon, K.L.M., Menendez, A., Liu, J., Mittal, Y.G., Karunakaran, K.P. and Sealy, M., 2023. Patterned Keyhole Porosity Formation in Laser Powder Bed Fusion Caused by Local Disturbances in the Shielding Gas Flow. Manufacturing Letters. https://doi.org/10.1016/j.mfglet.2023.08.073

10.   Hodgir, R., Mittal, Y.G., Kamble, P., Gote, G. and Karunakaran, K.P., 2023. Comparative Study of Rapid Ice Investment Casting Vs Rapid Casting Processes of Aluminium Alloy. International Journal of Precision Engineering and Manufacturing. https://doi.org/10.1007/s12541-023-00788-6  

11.   Gote, G., Kamble, P., Hodgir, R., Mittal, Y. and Karunakaran, K.P., 2022. Mathematical Modelling of Surface Roughness in Polystyrene Foam Machining. International Journal of Advanced Manufacturing Technology. https://doi.org/10.1007/s00170-022-09229-6 

12.   Kamble, P., Hodgir, R., Gote, G., Mittal, Y. and Karunakaran, K.P., 2022. Sub-zero Additive Manufacturing: Peculiarities and Applications of Additive Manufacturing at Temperatures below 0°C. Progress in Additive Manufacturing. https://doi.org/10.1007/s40964-022-00273-y 

13.   Kamble, P., Mittal, Y.G., Gote, G., Hodgir, R. and Karunakaran, K.P., 2021. COVID Key: A Multifunctional Device to Avoid Touch. Transactions of the Indian National Academy of Engineering. https://doi.org/10.1007/s41403-021-00250-x 

14.   Hodgir, R., Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Patel, A.K., Bernard, A. and Karunakaran, K.P., 2021. Mathematical Modelling of Pattern Sublimation in Rapid Ice Investment Casting. International Journal of Metalcasting. https://doi.org/10.1007/s40962-021-00665-w

15.   Patil, Y., Patel, A.K., Mittal, Y.G., Moon, A., Dubey, S., Akarte, M., Narkhede, B., Tiwari M.K., and Karunkaran, K.P., 2021. Impact of work from home on Communications in COVID-19 Pandemic. International Journal of Advance Research, Ideas and Innovations in Technology.

 (Under Review)

1.      Mehta, A.K., Gote, G., Solanki, K., Patil, Y., Mittal, Y.G., Ramani, V., and Karunakaran, K.P., 2024. Design and Development of Vacuum System for Electron Beam Powder Bed Fusion Process. Vacuum.

2.      Patil, Y., Akarte, M., Karunakaran, K.P., Patel, A.K., Mehta, A.K., Mittal, Y.G., Gote, G., Gupta, N.K., Patel, R., and Phanse, J., 2024. An Analytical Modeling and Experimental Investigation of a Novel Powder Management System for PBF AM Process. Journal of Manufacturing Processes.

3.      Mehta, A.K., Gote, G., Mittal, Y.G., Patil, Y., and Karunakaran K.P., 2024. Effect of Process Parameters on Joint Strength in Electron Beam Welding of Copper-stainless Steel. Transactions of the Indian Institute of Metals.

4.      Gote, G., Mehta, A.K., Mittal, Y.G., Patil, Y., Kamble, P., and Karunakaran, K.P., 2024. Rapid Foam Foundry: Integration of Foam Additive Manufacturing with Foam Foundry. International Journal of Metal Casting.

Pre-prints

1. Gupta, N.K., Siddhartha, S., Karade, S.R., Ganesan, G., Gote, G., Dubey, S., Mittal, Y., Mehta, A.K., and Karunakaran, K.P., Realization of Five-Axis Deposition Using Hybrid Layered Manufacturing. SSRN Pre-print. https://dx.doi.org/10.2139/ssrn.4550789

2. Mittal, Y.G., Prajapati, S., Kamble, P., Trushnikov, D., Bernard, A., and Karunakaran, K.P., 2021. Analysis of Screw Extrusion of Thermoplastics for AM. Research Square Pre-print. https://doi.org/10.21203/rs.3.rs-432309/v1

Journals (Under Preparation)

1.      Yadav, D.A., Mittal, Y.G., Gujarathi, S., and Karunakaran, K.P., 2024. A Tri-Axial Scissor-based Motion System using a Double Universal Joint.

2.      Mittal, Y.G., Agarwal, V., Avegnon, K.L.M., Sealy, M.P., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., Yadav, D.A., Mandal, P. and Karunakaran, K.P., 2024. Mechanistic Analysis of Overhang Limits in Additively Manufactured Thin-Walled Structures.

3.      Mittal, Y.G., Agarwal, V., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., Mandal, P., and Karunakaran, K.P., 2024. Investigations on the Helical Slicing in Material Extrusion Additive Manufacturing.

4.      Mittal, Y.G., Mehta, A.K., Kamble, P., Gote, G., Patil, Y., and Karunakaran, K.P., 2024. Passive Cooling via Fin Incorporation in Screw Extrusion Additive Manufacturing (SEAM).

5.      Mittal, Y.G., Kamble, P., Gote, G., Mehta, A.K., Patil, Y., and Karunakaran, K.P., 2024. Oozing Characteristics in Screw Extrusion Additive Manufacturing.

1.    Karunakaran, K.P., G., Ganesan, Mittal, Y.G., Gupta, N.K., Siddhartha, Mehta, A.K., Patil, Y., Karade, S.R., Dubey, S and Patel, A.K., 2022. Oscillating Multi-Wire Feeding for Hybrid Wire-Arc Additive Manufacturing System. Indian Patent Number: 463334

2.    Patel, R., Phanse, J., Karunakaran, K.P., Patil, Y., Patel, A.K., Mittal, Y.G., Mehta, A.K., Gote, G.D. and Gupta, N.K., 2023. Automated Apparatus and Process for Powder Handling. Indian Patent Application Number: 202321015972

3.    Karunakaran, K.P., Mittal, Y.G., Solapure, S., 2024. A NOVEL SCREW-EXTRUSION WIRE ROBOTICS SETUP FOR POLYMER ADDITIVE MANUFACTURING (PAM). Indian Patent Application Number: 202421056286

5.    Karunakaran, K.P., Mittal, Y.G., 2024. IRIS BASED VARIABLE NOZZLE MATERIAL EXTRUSION (MEX) TECHNIQUE. Indian Patent Application Number: 202421049942

1.      Mehta, A.K., Gote, G., Patil, Y., Mittal, Y.G., Singh, S., and Karunakaran, K.P., 2024, Electron Beam Hybrid Manufacturing: Powder Bed Fusion (EBHM-P). In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

2.      Mehta, A.K., Gote, G., Patil, Y., Mittal, Y.G., and Karunakaran, K.P., 2024, Effect of process parameters on beam output for EB-PBF process. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

3.      Patil, Y., Chavan, S., Pandya, M., Mehta, A.K., Gote, G., Mittal, Y.G., Patel, A.K., Akarte, M., and Karunakaran, K.P., 2024, Comparative Study of Scanning Strategies for Sand Mold Production Using Laser-Powder Bed Fusion AM Process. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

4.      Gote, G., Mehta, A.K., Patil, Y., Mittal, Y.G., Karade, S., Lalpurwala, P., and Karunakaran, K.P., Design of Omnidirectional Cladding System for Wire-fed Electron Beam Additive Manufacturing Process. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

5.      Agarwal, V., Mittal, Y.G., Yadav, D.A., Manal, P., Kamble, P., Patil, Y., Gote, G., Mehta, A.K., and Karunakaran, K.P., 2024, Variable Width Extrusion (VaWE) based Additive Manufacturing: A Novel Approach towards Area Filling. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

6.      Yadav, D., Mittal, Y.G., Agarwal, V., and Karunakaran, K.P., 2024, Heating Methods in Additive Manufacturing (AM): A Short Review. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

7.      Mittal, Y.G., Gote, G., Mehta, A.K., Patil, Y., Kamble, P., Mandal, P., Yadav, D.A., and Karunakaran, K.P., 2024, A Novel Wire Robotic Arrangement for Additive Manufacturing. In 13th International Conference on Precision, Micro, Meso and Nano Engineering (COPEN-13), National Institute of Technology (NIT), Calicut, India. (under submission)

8.      Mittal, Y.G., Kamble, P., Mehta, A.K., Gote, G., Patil, Y., Yadav, D.A., and Karunakaran, K.P., 2024, Analysis of Screw Extrusion of Thermoplastics. In 1st International Conference On New Product Development and Smart Manufacturing (NPDSM – 2024), Maulana Azad National Institute of Technology (MANIT), Bhopal, India. (under submission)

9.      Mehta, A.K., Gote, G., Solanki, K., Patil, Y., Mittal, Y.G., Ramani, V., and Karunakaran, K.P., 2024, Design and Development of Focusing system for Electron Beam Powder Bed Fusion Process. In 1st International Conference On New Product Development and Smart Manufacturing (NPDSM – 2024), Maulana Azad National Institute of Technology (MANIT), Bhopal, India. (under submission)

10.   Mittal, Y.G., Agarwal, V., Yadav, D.A., Gote, G., Kamble, P., Mehta, A.K., Patil, Y., and Karunakaran, K.P., 2024, Optimal Stepover in Material Extrusion (MEX) based Additive Manufacturing of Thermoplastic ABS. In International Conference on Next Generation Technologies: Design and Manufacturing (ICNGT), Indian Institute of Technology (IIT) Madras, India. (under submission)

11.   Yadav, D.A., Soman, D., Sonkamble, V., Mittal, Y.G., and Tiwari, A., 2024, Experimental And Finite Element Analysis of Additively Manufactured SS316 Under Combined Tension and Torsion Loading. In International Conference on Next Generation Technologies: Design and Manufacturing (ICNGT), Indian Institute of Technology (IIT) Madras, India. (under submission)

12.   Gote, G., Mehta, A.K., Patil, Y., Mittal, Y.G., Ramani, V., and Karunakaran, K.P., 2024. Design and Development of the High Voltage Vacuum feedthrough for Wire-Fed Electron Beam Additive Manufacturing. In THE 12TH VACUUM AND SURFACE SCIENCE CONFERENCE OF ASIA AND AUSTRALIA (VASSCAA-12), Taipei, Taiwan.

13.   Mittal, Y.G., Gote, G., Patil, Y., Mehta, A.K., Kamble, P., and Karunakaran, K.P., 2024. Investigations on Ironing Parameters in Screw Extrusion Additive Manufacturing (SEAM). In 52nd SME North American Manufacturing Research Conference (NAMRC-52), University of Tennessee, Knoxville, USA.

14.   Mittal, Y.G., Patil, Y., Kamble, P., Gote, G., Mehta, A.K., Siddhartha, Ganesan, G., Karade, S., Patel, A.K., Gupta, N.K., Dubey, S., and Karunakaran, K.P., 2023, Investigation on Kinematics in Additive Manufacturing. In 9th International & 30th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Indian Institute of Technology (IIT) BHU, Varanasi, India.

15.   Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., and Karunakaran, K.P., 2023, A Novel Analytical Model for Screw Extrusion of Thermoplastic ABS with Emphasis on Additive Manufacturing. In 51st SME North American Manufacturing Research Conference (NAMRC-51), Rutgers University, New Jersey, USA.

https://doi.org/10.1016/j.mfglet.2023.08.054

16.   Avegnon, K.L.M., Menendez, A., Liu, J., Mittal, Y.G., Karunakaran, K.P. and Sealy, M., 2023. Patterned Keyhole Porosity Formation in Laser Powder Bed Fusion Caused by Local Disturbances in the Shielding Gas Flow. In 51st SME North American Manufacturing Research Conference (NAMRC-51), Rutgers University, New Jersey, USA. https://doi.org/10.1016/j.mfglet.2023.08.073

17.   Mehta, A.K., Moon, A., Gote, G.D., Guram, A., Mittal, Y.G., Puttige, V., Reddy, G.T., Ramani, V.N.,and Karunakaran, K.P., 2023, Minimization of Electron Beam Drift During Deflection in Additive Manufacturing. In 4th International Conference on Electron Beam Additive Manufacturing (EBAM), FAU, WTM, EAM, Erlangen, Germany. 

18.   Mehta, A.K., Moon, A., Gote, G.D., Mittal, Y., Reddy, G.T., Ramani, V.N. and Karunakaran, K.P., 2023, Optimization of Electron Beam Deflection using Particle Tracing Mechanism. In 11th Indian Particle Accelerator Conference (InPAC 2023), Bhabha Atomic Research Centre (BARC), Mumbai, India.    

19.   Mittal, Y.G., Kamble, P., Gote, G., Mehta, A.K. and Karunakaran, K.P., 2022, Optimization of Extruder Screw Geometry for Additive Manufacturing. In 4th Structural Integrity Conference and Exhibition (SICE), Indian Structural Integrity Society (InSIS), Indian Institute of Technology (IIT), Hyderabad, India. 

20.   Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., and Karunakaran, K.P., 2022, Fin Design for Passive Cooling in Screw Extrusion Additive Manufacturing (SEAM). In 9th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2022) Nanyang Technological University (NTU), Singapore. https://doi.org/10.3850/978-981-18-6021-8_OR-01-0036.html  

21.   Mittal, Y.G., Gupta, N.K., Gote, G., Kamble, P., Mehta, A.K. and Karunakaran K.P., 2022, Warpage Control in Fused Deposition Modeling (FDM) of Thermoplastic ABS. In 7th International Conference on Additive Manufacturing (ICAM), American Society of Testing and Materials (ASTM), Orlando, USA.

22.   Mittal, Y.G., Gote, G., Kamble, P., Hodgir, R., Mehta, A.K. and Karunakaran, K.P., 2022, Significance of Specific Velocity in Screw Extrusion. In 4th International Conference on Advances in Manufacturing Technology (ICAMT), Chennai Institute of Technology (CIT), Chennai, India. https://doi.org/10.1063/5.0218015

23.   Gill, D.K., Bajaj, D., Rawat, A., Mittal, Y.G., Juneja, M and Jindal, P., 2019, Dimensional Accuracy of Surgical Guides fabricated from Different Materials Using 3D Printer. In 2nd International Conference on Communication, Computing and Networking, National Institute of Technical Teachers Training and Research (NITTTR), Chandigarh, India. Lecture Notes in Network and Systems. https://doi.org/10.1007/978-981-13-1217-5_80

1.    Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., and Karunakaran, K.P., 2023. Investigations on Die-Swell Behaviour in Screw Extrusion-Based Processing of Thermoplastic ABS, Advances in Pre- and Post-Additive manufacturing processes: Innovations and Applications, CRC Press. https://doi.org/10.1201/9781003428862

2.    Mittal, Y.G., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., and Karunakaran, K.P., 2023. Optimizing Material Extrusion Additive Manufacturing for Biomedical Thermoplastic: Applications in Biomedical Devices, Advances in 3D and 4D Printing of Medical Robots and Devices, CRC Press. (Under review)

3.    Mittal, Y.G., Agarwal, V., Kamble, P., Gote, G., Patil, Y., Mehta, A.K., Mandal, P., and Karunakaran, K.P., 2024. Application of Re-Melting Pass (RMP) in Enhancing Surface Finish in Material Extrusion (MEX) Additive Manufacturing: Case Studies and Recent Developments, Surface Modification and Coatings: Technology, Materials, and Applications, Moden Manufacturing, CRC Press. (under preparation)