This project involves the design and testing of an autonomous maze-navigating robot capable of completing a delivery and retrieval mission while avoiding obstacles and handling packages. The robot uses gear-reduced DC motors, TB6612FNG motor drivers, and a compact unibody chassis to improve reliability and performance. Testing confirmed successful autonomous navigation and obstacle handling, with remaining issues primarily related to startup timing and subsystem coordination rather than mechanical or algorithmic design.
Early prototype validating basic mobility, sensing, and gripper operation.
Large overall footprint made navigation and maneuvering more difficult.
Compact unibody design with improved wiring and component integration.
Required additional code tuning and minor adjustments to the claw and body for optimal performance.
The electrical system was designed as a modular stack rather than a custom PCB (printed circuit board). Individual components were organized into a clean, accessible stack that fits into the top of the robot’s chassis. This design keeps connections secure, reduces electrical noise, and allows for effective cooling and cable management. The stack can be easily removed for troubleshooting or adjustments without dismantling the robot, and the battery connects externally through an XT60 connector. Overall, this approach makes the electrical system robust, organized, and easy to service.
The functional architecture of the autonomous robot is divided into interconnected subsystems that operate within a continuous control loop managed by the Arduino Mega 2560. After system startup, the Sensor Subsystem collects distance and orientation data using a time-of-flight sensor and IMU. This information is processed by the Decision-Making Subsystem, where control actions such as navigation adjustments and package handling are determined. Commands are then sent to the Motor Control Subsystem, which drives the DC motors through TB6612FNG motor drivers, and to the Package Handling Subsystem, which operates the servo-driven gripper. A dedicated Power Management Subsystem provides stable, regulated power to all components. The system runs continuously until the mission is complete, at which point the robot safely shuts down.