La Parigné
XSR 900
XSR 900
The "Parigné" is an XSR 900 saddle modified and saddled by hand by a French craftsman located near the town of Parigné l'évecque, a small village near the famous circuit of 24 hours of Le Mans.
Child of the region and passionate about cars and motorcycles, our saddler is a recognized craftsman of the region. It was with his help and patience that our concierge was able to design the first 3 prototypes dedicated to the XSR Owner's Club.
From these first prototypes was born the model "La Parigné" with reference to its region of origin.
The X version have one more band for the second seat and the stitching end on the very back end.
By default, the Parigné option X is composed the black "Gloss Black"
the first prototype represents the model "Parigné" finition 60 edition "Red Bar" . The goal was to directly integrate a CE-approved LED bar at the back of the seat. During the various tests, the LED bar kept coming off, until I ended up staining the saddle with the only glue that worked.
Our mistake was to stick the LED directly on the imitation leather.
Thus the finish will no longer be as in the following picture, With the yellow below the LED.
The second prototype is the same model than prototype 1 but with a new LED bar fixation system, this is our final choice to integrate the LED Bar in the seat.
We recommand to add few point of strong glue in addition to the 3M extrem supplied with the seat package.
The disadvantage is that requires us to cut the seat shell to bolt the metal bar, so more labor and supply and the price is higher than originally planned. The advantage is that the bar is easily removable, and therefore more easily for maintenance on the LED bar, or even imagine to integrate another rear light into the saddle, the operation is then much more easyer.
We also provide 2 tiny serflex that will keep everything in place for a long time (not present on this photo).
In any case, both with and without the X option, the LED bar will now be glued and hooked directly to an aluminum bar integrated at the back of the saddle.
Finally we finished the third prototype, to repeat one last time the opertation and validate the production process, also to give another view of the "Parigné".
The following 3 photos represent the model "Parigné" finition "Classique" edition "Black Woods"
To conclude, I am very satisfied with this first product, the Artisan make a great job, and comments on social media help us to improve and continu this adventure. We integrate the needs of comfort with the spirale option and the gel option.
We had taken numbers of photos that can give you a good idea of the seat finitions thanks to the 3 prototypes that we made. You can check the photos in the following album:
Les options:
We recommand you to ask advice to the concierge on social network or via his email address xsr900ownersClub@gmail.com