Papers
Before GNU
(First Author: *, Corresponding Author: #)
[40] J. Kim, J. Lee, S. J. Park, J. Lee, B. Song, S. K. Moon#, "Software-defined factory: paradigm shift in manufacturing towards industry 5.0", International Journal of Precision Engineering and Manufacturing - Smart Technology, 2025.
[39] S. Jeon*, S. J. Park, S. K. Moon#, D. Yang#, "Enhanced mechanical properties and reduced anisotropy of material extrusion-manufactured short carbon fibre-reinforced plastic via cold isostatic pressing", Virtual and Physical Prototyping, 2025.
[38] S. Jeon*, J. Kim, S. J. Park, J. Y. Kim, S. K. Moon#, D. Yang#, "Temperature dependent mechanical properties of end-of-life carbon fiber reinforced plastics", International Journal of Precision Engineering and Manufacturing - Green Technology, 2025.
[37] S. J. Park*, J. P. Choi, P, -H. Lee, S. K. Moon#, "Strategic design and simulation of interfaces for enhanced joint performance in metal-polymer hybrid structures", Journal of Computational Design and Engineering, 2025.
[36] S. J. Park*, J. Yang, J. H. Lee, S. Hong, S. K. Moon, Y. Son#, S. -H. Park#, "High-strength of additive-manufactured PEEK and Ti6Al4V structure via warm isostatic pressing applications in medical implants and injection moulds", Virtual and Physical Prototyping, 2025.
[35] A. Go*, E. S. Jeon#, S. K Moon, S. J .Park, "Fabrication of 17-4PH stainless steel by metal material extrusion Effects of process parameters and heat treatment on physical properties", Materials & Design, 2024.
[34] J. H. Lee*, S. J. Park*, J. Yang, S. K. Moon, J. Park#, "Crack control in additive manufacturing by leveraging process parameters and lattice design", Micromachines, 2024.
[33] S. J. Park*, W. Heogh*, J. Yang, S. Kang, W. Jeong, H. Lee, T. -S. Jang, H. -D. Jung, M. Jahazi, S. C. Han, H. S. Kim, M. -G. Lee, S. Bose, A. Bandyopadyay, M. B. -G. Jun, Y. W. Kim, X, Fu, R. C. Advincula, C. Aranas Jr.#, S. H. Kim#, "Meta‑structure of amorphous‑inspired 65.1Co28.2Cr5.3Mo lattices augmented by artifcial intelligence", Advanced Composites and Hybrid Materials, 2024.
[32] S. J. Park*, J. S. Lee*, J. E. Lee, S. K. Moon, Y. Son#, S. -H. Park#, "Influence of nozzle temperature on gas emissions and mechanical properties in material extrusion-based additive manufacturing of super engineering plastics", 2024.
[31] J. Yang*, W. Heogh, H. G. Ju, S. Kang, T. -S. Jang, H. -D. Jung, M. Jahazi, S. C. Han, S. J. Park, H. S. Kim, S. Bose, A. Bandyopadhyay, M. B. -G. Jun, Y. W. Kim, D. -K. Kim, R. C. Advincula, C. Aranas Jr.#, S. H. Kim#, "Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite", 2024.
[30] J. Yang*, S. J. Park, S. H. Kim, S. M. Yeon, K. I. Kim, Y. Son, P, Kahhal, J. Park#, S. -H. Park#, "Effective spiral laser path for minimizing local heating and anisotropic microstructures in powder bed fusion additive manufacturing", 3D Printing and Addtive Manufacturing, 2023.
[29] S. J. Park*, J. H. Lee, J. Yang, S. K. Moon, Y. Son, J. Park#, "Enhanced energy absorption of additive-manufactured Ti-6Al-4V parts via hybrid lattice structures", Micromachines, 2023.
[28] J. Y. Hwang*, S. J. Park, Y. Son, H. Y. Jung#, "Influence of in situ magnetic field on magnetic properties of a bonded permanent magnet manufactured through material extrusion additive manufacturing", Metals, 2023.
[27] W. R. Jerin*, S. J. Park, S. K. Moon#, "A Design optimization framework for 3D printed lattice structures", International Journal of Precision Engineering and Manufacturing - Smart Technology, 2023.
[26] S. J. Park*, D. H. Kim, H. G. Ju, S. J. Park, S. Hong, Y. Son#, I. H. Ahn, "Increased interlayer bonding strength of short carbon fiber composite fabricated by material extrusion via warm isostatic pressing (WIP) process", Journal of materials research and technology, 2023.
[25] S. J. Park*, H. G. Ju, S. J. Park, S. Hong, Y. Son#, I. H. Ahn#, "New possibilites in polymer binder jetting additive manufacturing via infiltration and warm isostatic pressing", Materials & Design, 2023.
[24] J. E. Lee*, S. W. Heo, C. H. Kim, S. J. Park, S. -H. Park#, T. H. Kim#, "In-situ ionic crosslinking of 3D bioprinted cell-hydrogel constructs for mechanical reinforcement and improved cell growth", Biomaterials Advances, 2023.
[23] B. -Y. Choi*, S. J. Park, Y. Son, S. -J. Han, H. -G. Kim, I. H. Ahn#, W. C. Choi#, "Imfluence of warm isostatic press process on mechanical properties of a part fabricated by metal material extrusion process", Applied Sciences, 2022.
[22] S. J. Park*, J. W. Choi*, S. J. Park, Y. Son#, I. H. Ahn#, "Improving properties of a part fabricated by polymer-based powder bed fusion using a warm isostatic press (WIP) process", Materials & Design, 2022.
[21] S. J. Park*, J. E. Lee, Y. Son, S. -H. Park, "A Study on material extrusion additive manufacturing of transparent thermoplastic polymer for microfluidic chip fabrication", Journal of the Korean Society of Manufacturing Process Engineers, 2022.
[20] T. -S. Jang*, S. J. Park*, J. E. Lee, J. Yang, S. -H. Park M. B. -G. Jun, Y. W. Kim, C. Aranas, J. P. Choi, Y. Zou, R. C. Advincula, Y. Zheng, H. L. Jang, N. -J. Cho, H. -D. Jung, S. H. Kim, "Topography-supported nanoarchitectonics of hybrid scaffold for systematically modulated bone regeneration and remodeling", Advanced Functional Materials, 2022.
[19] S. J. Park*, S. J. Park, Y. Son#, I. H. Ahn#, "Influence of warm isostatic press (WIP) process parameters on mechanical properties of additively manufactured acrylonitrile butadiene styrene (ABS) parts", The International Journal of Advanced Manufacturing Technology, 2022.
[18] S. J. Park*, J. H. Lee, J. Yang, W. Heogh, D. Kang, S. M. Yeon, S. H. Kim, S. Hong, Y. Son, J. Park#, "Lightweight injection mold using additively manufactured Ti-6Al-4V lattice structures", Journal of Manufacturing Processes, 2022.
[17] J. H. Lee*, S. J. Park, J. Yang, S. M. Yeon, S. Hong, Y. Son, J. Park#, "Crack guidance utilizing the orientation of additive manfuactured lattice structure", International Journal of Precision Engineering and Manufacturing, 2022.
[16] S. J. Park*, S. J. Park*, Y. Son, I. H. Ahn#, "Reducing anisotropy of a part fabricated by material extrusion via warm isostatic pressure (WIP) process", Additive Manufacturing, 2022.
[15] S. J. Park*, J. E. Lee, S. C. Jin, N. -K. Lee, K. Choi, S. -H. Park, Y. Son#, "Tensile test of additively manufactured specimens with external notch removed via laser cutting in material extrusion", Polymer testing, 2022.
[14] J. Yun*, J. Lee, C. W. Ha, S. J. Park, S. Kim, K. -T. Koo, Y. -J. Seol, Y. -M. Lee#, "The effect of 3-D printed polylactic acid scaffold with and without hyaluronic acid on bone regeneration", Journal of Periodontology, 2021.
[13] S. J. Park*, J. E. Lee, J. Park, N. -K. Lee, Y. Son, S. -H. Park#, "High-temperature 3D printing of polyetheretherketone products: perspective on industrial manufacturing application of super engineering plastics", Materials & Design, 2021.
[12] J. E. Lee*, S. J. Park, Y. Son, K. Park, S. -H. Park#, "Mechanical reinforcement of additive-manufactured constructs using in situ auxiliary heating process", Additive Manfuacturing, 2021.
[11] S. J. Park*, J. E. Lee, J. W. Choi, J. Yang, J. H. Lee, J. Lee, Y. Son, C. W. Ha, N. -K. Lee, S. H. Kim#, S. -H. Park#, "Additive manufacturing of the core template for the fabrication of an artificial blood vessel: the relationship between the extruded deposition diameter and the filament/nozzle transition ratio", Materials Science & Engineering C, 2021.
[10] J. Lim*, Y. Kim, J. Shin, Y. Lee, W. Shin, W. Qu, E. Hwang, S. J. Park, S. Hong#, "Continuous-wave laser-induced transfer of metal nanoparticles to arbitrary polymer substrates", nanomaterials, 2020.
[9] S. J. Park*, J. E. Lee, H. B. Lee, J. Park, N. -K. Lee, Y. Son#, S. -H. Park#, "3D printing of bio-based polycarbonate and its potential application in ecofriendly indoor manufacturing", Additive Manufacturing, 2020.
[8] S. J. Park*, Y. Son, I. H. Ahn#, "Tensile strength improvement of FDMed ABS parts by a WIP heat treatment", TEST Engineering & Management, 2019.
[7] H. -D. Jung*, T. -S. Jang, J. E. Lee, S. J. Park, Y. Son, S. -H. Park#, "Enhanced bioactivity of titanium-coated polyetheretherketone implants created by a high-temperature 3D printing process", Biofabrication, 2019.
[6] S. H. Kim*, S. -M. Yeon*, J. H. Kim, S. J. Park, J. E. Lee, S. -H. Park, J. -P. Choi, C. Aranas, Jr., Y. Son#, "Fine microstructured In-Sn-Bi solder for adhesion on a flexible PET substrate: Its effect on superplasticity and toughness", Applied Materials & Interfaces, 2019.
[5] J. E. Lee*, S. J. Park, Y. Yoon, Y. Son, S. -H. Park#, "Fabrication of 3D freeform porous tubular constructs with mechanical flexibility mimicking that of soft vascular tissue", Journal of the Mechanical Behavior of Biomedical materials, 2019.
[4] S. J. Park*, J. E. Lee, J. Park, N. K. Lee, M. -Y. Lyu, K. Park, M. S. Koo, S. H. Cho, Y. Son#, S. -H. Park#, "Enhanced solubility of the support in an FDM-based 3D printed structure using hydrogen peroxide under ultrasonication", Advanced in Materials Science and Engineering, 2018.
[3] S. J. Park*, J. E. Lee, J. Park, M. -Y. Lyu, K. Park, M. S. Koo, S. C. Jin, K. Y. Kim, Y. Son#, "FDM 3D printing of evironmental friendly and high strength bio-based PC filaments for baby toys", Elastomers and Composites, 2017.
[2] S. J. Park*, J. H. Park, M. -Y. Lyu#, M. S. Koo, H. J. Rho, S. H. Cho, "Comparison of bulk strength, weldline strength, and deposition strength of 3D printing-manufactured article in Fossil PCs and Bio-based PCs", Polymer (Korea), 2017.
[1] S. J. Park*, J. H. Park, K. H. Lee, M. -Y. Lyu#, "Deposition strength of specimens manufactured using fused deposition modeling type 3D printer", Polymer (Korea), 2016.