How X-Ray Inspection Systems In Miami Work & Benefits of Using This Inspection System
The X-ray inspection systems in Miami have become an integral part of food processing and packaging industry, as it is essential to remove all types of contaminants from the food. The ferrous contaminants can be detected using magnetic detector and three-coil metal detectors are used to find out various non-ferrous contaminants. However, the 3-coil metal detectors have their limitations. They cannot detect any contaminant if the edibles have been packed inside an aluminum-coated container and X-ray inspection systems are used in this scenario.
The high-end X-ray inspection systems in Miami makes it easier for the manufacturers to find out different types of contaminants, as some of these machines can perform parallel inspection. Some advanced X-ray inspection machines do not require correct placement of the food package. Some inspection machines may even identify contaminants if the products are overlapping. An X-ray is generated by an electric tube and a detector that measures the severity of radiation is positioned above the conveyor belt. The X-ray can penetrate through the solid materials; however, it attenuates to different degrees when passing through different types of solid materials. It attenuates to a higher degree when passing through a high-density material and attenuates to a lower degree when passing through a low-density material. It is possible to detect various contaminants based upon this difference.
A detector that is present at the top of X-ray inspection systems in Miami converts the unabsorbed radiation into electrical signal. The X-ray reaches the sensor that is attached to the inspection system after exiting a product and the energy signals are converted into an image by the sensor. Any foreign matter that is present inside the package will appear as the darker shade of grey. The popularity of the X-ray inspection systems has increased over the years, as it can be used to detect a wide variety of metals along with the stone, glass and bones.
It has become possible to optimize the safety of consumers using X-ray inspection systems in Miami, as these systems can detect a large variety of physical contaminants that cannot be detected by the conventional metal detectors. Therefore, the businesses can cater better quality products to the consumers with the help of X-ray inspection systems.
The X-ray inspection systems in Miami are equally useful when checking the quality of packed edibles or other products. For example, these machines can be used to examine the fill-level of a container. It is also possible to use an X-ray inspection system to look for the damaged products or to count the components. It may be difficult to spot such defects without using an advanced method of inspection, as the product line moves at rapid pace. It has become possible for the businesses to trace contaminants in edibles at different stages of production or packaging using X-ray inspection system. It lowers the possibility of recall. Visit Here: Factronics USA