While Norton Secure VPN doesn't natively support WireGuard or static IPs, you can achieve similar functionality by routing traffic through a personal WireGuard server with a static IP. This guide outlines the process for creating a secure tunnel for your Norton VPN traffic.
Choose a VPS Provider: Select a VPS provider (e.g., DigitalOcean, Vultr, Linode) offering a static IP and WireGuard support.
Install WireGuard: Follow the VPS provider's instructions or use a script like wg-easy for simplified installation.
Configure wg0.conf: Edit the WireGuard server configuration file (/etc/wireguard/wg0.conf).
Set a static IP address for the server's interface: Address = 10.6.0.1/24
Define the listening port: ListenPort = 51820
Configure the private key: PrivateKey = <server_private_key>
Enable IP forwarding:
sudo sysctl -w net.ipv4.ip_forward=1
sudo sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/g' /etc/sysctl.conf
Configure nftables (Firewall): Configure firewall rules to allow WireGuard traffic and forward traffic correctly. Example nftables.conf:
table inet filter {
chain input {
type filter hook input priority 0; policy drop;
iifname "wg0" accept comment "Allow WireGuard traffic"
ct state {established, related} accept comment "Allow established/related connections"
tcp dport {22, 80, 443, 51820} accept comment "Allow SSH, HTTP, HTTPS, WireGuard"
icmp type echo-request limit rate 10/second accept comment "Allow ping with rate limiting"
reject with icmp type port-unreachable comment "Reject everything else"
}
chain forward {
type filter hook forward priority 0; policy drop;
oifname "wg0" accept comment "Allow forwarding out to WireGuard"
iifname "wg0" oifname != "wg0" accept comment "Allow forwarding from WireGuard to other interfaces"
reject with icmp type port-unreachable comment "Reject everything else"
}
chain output {
type filter hook output priority 0; policy accept;
}
}
table ip nat {
chain postrouting {
type nat hook postrouting priority 100; policy accept;
oifname != "wg0" masquerade comment "Masquerade traffic leaving non-WireGuard interfaces"
}
}
Apply the configuration: sudo nft -f /etc/nftables.conf
Enable on boot: sudo systemctl enable nftables
Generate Client Key Pair: Generate a private and public key pair for the client.
Create Client Configuration: Create a client configuration file (e.g., client.conf).
[Interface]
PrivateKey = <client_private_key>
Address = 10.6.0.2/32
DNS = 8.8.8.8, 8.8.4.4
[Peer]
PublicKey = <server_public_key>
AllowedIPs = 0.0.0.0/0
Endpoint = <server_ip>:51820
PersistentKeepalive = 25
Import Client Configuration: Import this configuration into your WireGuard client (e.g., the WireGuard app on your phone/computer).
Connect to WireGuard: Activate the WireGuard tunnel on your client device.
Connect to WireGuard: Ensure the WireGuard tunnel is active.
Start Norton Secure VPN: Connect to a Norton Secure VPN server. All your traffic will now be routed through the WireGuard tunnel first, then through Norton's VPN.
Firewall Rules: Double-check your nftables rules to ensure WireGuard traffic is allowed in both directions.
IP Forwarding: Verify that IP forwarding is enabled on the server.
DNS Leaks: Ensure the DNS server in your WireGuard client configuration is reliable (e.g., Google DNS, Cloudflare DNS).
MTU Issues: If you experience connectivity problems, try lowering the MTU in your WireGuard configuration (e.g., MTU = 1420).
VPS with static IP acquired
WireGuard server installed and configured
nftables configured correctly
WireGuard client configured
WireGuard tunnel active
Norton Secure VPN connected after WireGuard connection.