If you want a compact, wired on-ear option for Switch, choose Williams AV Sound WS-HED036; if you need over-ear coverage and a broader stated frequency range for Switch, choose New Bee Studio Headphones. The New Bee is the more feature-rich fit for extended listening and monitoring, while the Williams AV keeps things simpler and lighter on the ears.
• Williams AV Sound WS-HED036: An on-ear wired design with a 3.5 mm jack and a listed weight of 1.6 ounces; its trade-off is the simpler feature set, including no listed noise control.
• New Bee Studio Headphones: Over-ear cups, passive noise cancellation, and a stated 10 Hz–40,000 Hz frequency range; its trade-off is a larger over-ear design with no wireless connection.
• Choose Williams AV if you want a lightweight, straightforward wired headset for Switch and prefer on-ear padding.
• Choose New Bee if you want over-ear coverage, passive noise reduction, and a headset also suited to monitoring or recording tasks.
The WS-HED036 is a wired, on-ear stereo headphone with a 3.5 mm jack. Its listed weight is 1.6 ounces, which makes it the lighter of these two models by the available specifications. That matters if you want to avoid adding much weight around your ears during a handheld gaming session or when carrying a simple headphone along with your Switch. It uses dynamic drivers and has a stated frequency range of 20 Hz–20 kHz, a range that describes the audio frequencies the product is specified to reproduce.
Its practical appeal is restraint. There is no wireless setup to manage, and the 3.5 mm connection is a familiar, direct option for compatible devices. The on-ear padding rests against the ears rather than enclosing them, so this is a different fit from the New Bee’s over-ear cups. The specifications list no noise control. That means buyers seeking passive noise reduction or a more enclosed listening arrangement should look elsewhere rather than assume the on-ear design will block surrounding sound.
For someone searching for comfortable true wireless earbuds for Switch, the important distinction is that the Williams AV is not true wireless: it is a wired headphone. It also is not an open-ear earbud or a spatial-audio earbud. Its useful case is simpler: a wired listening option for someone who wants a low listed weight and on-ear placement without adding wireless features.
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-10-22 · 8 min read · Independent comparison
Who should skip it: Skip the WS-HED036 if you specifically need wireless earbuds, passive noise cancellation, or over-ear coverage.
The published figures also call out 16-ohm impedance and 108 dB sensitivity. Those numbers may help buyers comparing audio specifications, but they do not change the basic buying decision here: the Williams AV is a compact, wired, on-ear model with no listed noise control. Its 3.5 mm jack is the clearest connection detail to check against the device and setup you plan to use.
The New Bee Studio Headphones take the opposite approach. They are wired over-ear headphones with artificial-leather and memory-foam materials listed for the enclosure and earcups. Their over-ear shape gives them a more enclosing fit than the Williams AV’s on-ear pads. The product also lists passive noise cancellation, which is a useful distinction for a listener who wants some reduction of surrounding noise without relying on an active noise-control feature.
New Bee specifies a 10 Hz–40,000 Hz frequency range and dynamic drivers. That range extends lower and higher on paper than the Williams AV’s stated 20 Hz–20 kHz range. The figures are not a guarantee that every listener will perceive a particular sound difference, but they give comparison-minded buyers a concrete specification to consider. New Bee also describes the headphones for tasks such as recording, mixing, podcasting, guitar, piano, and monitoring. If you want one wired headset for Switch and those kinds of listening or audio-work tasks, its intended uses are broader.
The connection options are listed as 3.5 mm and 6.35 mm jacks. That offers more flexibility for compatible audio equipment than the Williams AV’s listed 3.5 mm jack alone. The description also identifies 90-degree swiveling ear cups for single-ear monitoring. That feature is geared toward monitoring workflows rather than ordinary handheld gaming, but it may matter if you want headphones that can serve more than one role.
Who should skip it: Skip New Bee if your priority is the lightest listed option or you specifically want a compact on-ear fit rather than over-ear coverage.
The New Bee is not wireless either, so it will not meet a need for untethered listening. The product information lists a two-year warranty, but that should not be mistaken for a promise about fit or sound preference. In practical terms, its strongest case is a versatile wired headset with over-ear cups, passive noise control, and connection choices for compatible equipment.
Side-by-Side: Which Should You Choose?
• Best for the lower listed weight → Williams AV Sound WS-HED036. Its listed weight is 1.6 ounces; no corresponding weight is provided for the New Bee, so compare only the figure that is available.
• Best for on-ear placement → Williams AV Sound WS-HED036. Its padded earcups rest on the ears, unlike New Bee’s over-ear design.
• Best for passive noise control → New Bee Studio Headphones. Passive noise cancellation is listed for New Bee; the Williams AV specifies no noise control.
• Best for a broader stated frequency range → New Bee Studio Headphones. Its specified range is 10 Hz–40,000 Hz, compared with 20 Hz–20 kHz for the Williams AV.
• Best for a simple 3.5 mm wired connection → Williams AV Sound WS-HED036. It has a listed 3.5 mm jack. New Bee lists both 3.5 mm and 6.35 mm jacks.
• Best if you want either headphone to be wireless → Neither. Both are wired, so these are not alternatives to wireless earbuds.
• Best for Switch players wanting open-ear audio → Neither. Both are headphones, and neither product is described as an open-ear earbud or as offering spatial audio.
Start with the fit you actually prefer. On-ear headphones sit against the ears, while over-ear headphones surround them. The Williams AV’s listed 1.6-ounce weight and on-ear placement may appeal if minimizing weight is central to your choice. New Bee’s over-ear construction and passive noise cancellation may be more attractive if you want a more enclosing design. The available information does not give a comparable weight for New Bee, so there is no sound basis for calling it heavier or lighter by a specific amount.
Next, check the connection. Both models are wired, so neither offers the freedom of true wireless earbuds. Williams AV lists a 3.5 mm jack; New Bee lists 3.5 mm and 6.35 mm jacks. Confirm that the connection you intend to use works with your particular Switch setup and any other equipment you plan to connect. The product details do not establish compatibility with every device or adapter.
Think about your surroundings, too. New Bee lists passive noise cancellation, while Williams AV lists no noise control. That is a meaningful feature difference if you commonly listen near other activity. It does not establish how much surrounding sound either design will reduce in your specific environment, so treat it as a design distinction rather than a guarantee of isolation.
Finally, be clear about what you mean by “for Switch.” If you are looking for spatial audio open ear earbuds for Switch, neither model matches that description based on the available product details. If your priority is simply wired headphone listening, choose based on fit, noise control, and whether you also want a headset for recording or monitoring. For current pricing, check the current price on Amazon using the page’s button.
My Verdict
I’d choose the Williams AV Sound WS-HED036 instead if a low listed weight and on-ear fit mattered more than noise control or extra connection options. My pick for Switch is New Bee for versatility, not because either model is wireless or designed specifically for Switch.
No. Both are listed as wired headphones. Williams AV has a 3.5 mm jack, while New Bee lists 3.5 mm and 6.35 mm jacks.
New Bee is the only one of the two with passive noise cancellation listed. Williams AV specifies no noise control. The specifications do not give a measured amount of noise reduction.
The available specifications do not prove that one will sound better to every listener. New Bee lists a 10 Hz–40,000 Hz frequency range, while Williams AV lists 20 Hz–20 kHz; those ranges alone do not settle personal sound preference.
No. Both products are wired headphones, not earbuds described as open-ear or spatial-audio models. Williams AV is on-ear, and New Bee is over-ear.
• Bodykoo Gaming Earbuds vs iTouch Pulse Buds True
• 3M Pro-Comms Electronic Hearing vs Floriogra 12
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.