Hello,
So like I said in the title, with no apparent pattern, my touchpad speed drops randomly. I searched thourgh the forums for a solution high and low but I couldn't even find the same problem.
I recreated the problem with a script which changes the speed with "xinput set-prop":
_FLk-0wm38
I'm making the same hand movements throughout the video but as you can see after 2nd second, cursor slows down.
Why Does My Download Speed Drop Randomly
DOWNLOAD 🔥 https://urlca.com/2yGbOq 🔥
Values are completely constant. I'm really suspicious about this being an hardware issue because the device is only 2 months old. I'm going to try it on Windows to see if the bug is present there too. If it is, I'm really unlucky.
Usually, the NetIO-GUI, which tests network speeds to a local networked machine, RX/TX speeds are close to 1Gbps, but during a download speed drop, the RX speeds are around 500Mbps. I tweaked some of my NIC's settings from within Intel's PROSet Adapter Config Utility, which also passes all the NIC problem check tests, when the issue is 'active'.
I recently switched Ethernet wall socket connection, both are in the same tube, which run down to the patch panel and into the UniFi Switch 24. All the cables are Cat-5E and the connection is forced to 1Gbps Full duplex, since there were some auto-negotiaton issues with UniFi switches.
I noticed that when the CPU is at a constant load, the NetIO-GUI speeds are all over the place, when I stop that constant load, the speeds are close to 1Gbps. The NetIO server is a VMWare ESXi VM that runs at 100% CPU load all the time and without any issues can download/upload 1Gbps. When I disable and enable the NIC in the Network adapter configuration screen, the issue is gone for an unkown amount of time.
Intel uses strange version numbers for their driver packages, the Intel Network Connections version is 25.3.0.1, which strangely enough is not available on Intel's website anymore. The issue was also here on 25.1.1 and 25.2.
The problem was most likely caused by an incorrect D.O.C.P. profile on my motherboard. I used the DRAM Calculator tool by 1usmus to calculate the proper timings, I entered them in my BIOS (or UEFI however you want to call it) and I've been running at around (give or take 5Mbps) 250Mbps/25Mbps for two days straight.
Maybe the connection is worse on one device or in a particular part of the house. No matter the reason, you can't seem to get full speed from your router. If that's your case, you should attempt to fix fluctuating internet speeds and overcome unreliable Wi-Fi connections.
Before investigating your Wi-Fi network, you should rule out whether the problem lies with your Internet Service Provider (ISP). If you have a laptop, computer, or mobile device, test your connection on a dedicated website like Speedtest, avoiding common Wi-Fi speed test mistakes to get accurate results.
To measure your Wi-Fi and internet speeds when physically connected to the router, plug your device into the router with an Ethernet cable and see if your download speed and connection fluctuate. This can also help you test the internet speed for game consoles.
Because cabled connections have higher speeds, you should expect a small drop on Wi-Fi-connected devices. If connecting via a cable doesn't improve speeds by much, it's likely a problem with your ISP. Many providers can perform remote diagnostics, so it's worth contacting their support team to resolve the issue. You can also check if there is a regional issue or fault affecting internet connectivity.
However, if speeds improve significantly when physically connected to your router, you may have a specific problem with your Wi-Fi network. In that case, we recommend trying some of the other fixes. For example, if you were trying to access a particular website, use a site like Down For Everyone or Just Me to see if the website is down for other users, too.
As with other areas of your digital life, you should ensure that your router's firmware is up-to-date. These updates often come with many bug fixes and essential security patches, making your Wi-Fi speed faster and solving all connection issues.
Already on the latest firmware? In that case, reboot the router to clear its cache. Likewise, if you're experiencing low speeds on a particular device, check that any outstanding software updates are installed before troubleshooting.
Wi-Fi networks broadcast on many different channels and two separate frequency bands. There are 11 standard Wi-Fi channels in the US, while there are usually 13 worldwide. In the early days of wireless networking, routers only broadcast on the 2.4 GHz band.
But as more of us started to equip our homes with Wi-Fi networks, the amount of Wi-Fi channels has needed to expand. Most modern routers broadcast at both 2.4GHz and 5GHz, while Wi-Fi 6E routers broadcast at 6GHz, too, increasing the number of available Wi-Fi channels.
While this gives you more options, it's always possible that another Wi-Fi network or electrical equipment is already broadcasting on the same channel as your network. Overcrowding a particular frequency channel may cause your network to slow down and could be the root of your problems.
If you find that your Wi-Fi speeds drop periodically or at certain times of day, then software or other devices may be eating away at your bandwidth. Large downloads, video streaming, or online gaming can be bandwidth hogs, so check for these first.
You can find out what's using your Wi-Fi bandwidth directly from the router or a third-party program. Delving into your router's settings should let you determine which devices are connected to your network. If there are any you don't recognize, then you should remove them.
Although we can't see them, wireless signals are passing all around us. But they can get slowed down or, in some cases, blocked entirely. Concrete and metal are so effective at blocking wireless signals that they are even used in Faraday cages. To get around this, check our tips to boost the Wi-Fi speed and extend the Wi-Fi range in your home.
So, if the router is in your concrete-walled basement, move it elsewhere in the house. Also, try to position the router in the center of your home. Wi-Fi signals are broadcast in 360 degrees, so it doesn't need to be at one end of the house to get the best coverage.
Electrical interference and obstruction from microwaves and even Christmas lights might slow your Wi-Fi down. Also, you should try to detect and fix wireless "dead zones" or "dead spots" in your home.
If a weak signal affects your internet speed and you can't move your router, consider investing in a Wi-Fi extender or mesh Wi-Fi. You can even use an old router to boost or extend the signal to different areas of your home. If you prefer to buy a new device, you don't have to break the bank to invest in one of the best mesh Wi-Fi networks, either.
If your investigations uncover suspicious client devices, someone may have gained unauthorized access to your Wi-Fi network. This could be as innocuous as a neighbor leeching off your network down to something far more threatening.
One of the easiest is to upgrade your router's antenna. Most routers come fitted with standard antennas that only have a limited range. You can buy an aftermarket antenna for as low as $10, so it doesn't have to strain your bank balance either.
The router itself can create a choke point for speeds. If you have a speedy internet plan, consider upgrading to a newer router to take advantage of better bandwidths but check that it can handle the number of devices you have connected to the network.
It's not always straightforward when creating the optimal Wi-Fi setup, but it is worth the effort. The next time you want to play an online game, stream Netflix, or browse the web, you'll be thankful you put the time into optimizing your network.
Keeping your router's hardware and software up-to-date, positioning it well, and selecting the best channel will make a world of difference to your Wi-Fi speed. That said, you may still need some performance improvements even with all these adjustments.
James is an experienced technology journalist and was formerly MakeUseOf's Buyer's Guide Editor. His goal is to make tech accessible and safe for everyone. While graduated with a BEng in Mechanical Engineering, he's also passionate about mental health, sustainability, and music.
I am on my second G3100, second E3200, and second ONT. I am running into the same issues I've had with the original units. At random times throughout the day, my WiFi speeds will drop from 300mbps to about 1mbps and a ping between 160-250. It does this for 5-10 minutes, then goes back to normal speeds. Wired (both ethernet and MoCa) have no issues and give me no interruptions.
Do you have devices like Sonos, Chromecast, or anything utilizing Time Machine (Apple)? it sounds like you may be having an issue with broadcast traffic on the network from time to time. Broadcast traffic on Wi-Fi is typically broadcast at 1Mbps, the slowest possible rate for Wi-Fi to operate at, and G3100 doesn't allow for you to manually specify the minimum rate.
Also, check your wired connections. Make sure they work solidly, first of all, and you're seeing the Gigabit service as you would expect. If you have a switch or anything else of the sort in your house, ensure you're following a tree topology and not interconnecting more than one port from the G3100 to a Switch/device, and vice versa for any switch to any other device. If you're using MoCA Adapters anywhere in the house, ensure they also aren't causing connections to loop back to your router's Ethernet ports directly.
I have FiOS TV, not sure why that matters in this case. I swapped out the G3100 this weekend for my old G1100 and had no issues with drops during those two days. I reconnected the G3100 this morning and have already experienced a drop to almost 0mbps. 152ee80cbc
us232r-10-bulk driver download
klansman ave orientation book pdf download