Research Interest

2020.08~Now - Assistant professor, Program in Interdisciplinary Studies, National Sun Yat-sen University, Taiwan

2019.08~2020.07 - Associate professor, Department of Mechanical Engineering, National Pingtung University of Science and Technology, Taiwan

2015.08~2019.07 - Assistant professor, Department of Mechanical Engineering, National Pingtung University of Science and Technology, Taiwan

2014.04~2015.06 - Postdoctoral research/ Research fellow/ Start-up team, Medical Device Innovation Centre, National Cheng Kung University, Taiwan

2012.08~2014.04 - Senior Engineer, DED Department, SHL (Scandinavian Health Ltd.) Group, Taiwan

2011.08~2012.07 - Military Service in R. O. C. Military Academy

2006.09~2011.06 - Ph.D. program of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan

2004.09~2006.06 - Master program of Mechanical Engineering, National Cheng Kung University, Tainan, Taiwan

2000.09~2004.06 - Bachelor program of Mechanical & Electro - Mechanical Engineering, National Sun Yat-sen University, Kaohsiung, Taiwan

2020.02~2020.06 - BeSu.Solutions GmbH, Germany

2019.04~2019.06 - BeSu.Solutions GmbH, Germany

2010.09~2011.08 - Institute of Machine Tools and Production Technology, TU-Braunschweig, Germany

2009.07~2009.09 - Institute of Machine Tools and Production Technology, TU-Braunschweig, Germany

Cheng-Jung Yang received the Master and the Ph.D. degree from the department of Mechanical Engineering in National Cheng Kung University in 2006 and 2011, respectively. He is currently an Assistant Professor in the Program in Interdisciplinary Studies, National Sun Yat-sen University, Taiwan. He is the head of the Sustainable Innovation laboratory and also manages the Maker space of SI Wan Collage. He is involved in the research of TRIZ, 3D printing, internet of thing (IoT), medical device design, sustainable design and their applications.

International Journal-SCI: (*Corresponding Author)

1. K. David Huang; Thangavel Sangeetha; Yi-Shiuan Wu; Chun-Chen Yang; Po-Tuan Chen*; Cheng-Jung Yang*, “Suppressing Anodic Degradation of Lithium-ion Batteries by Composite Sinusoidal Waveform Charging Method”, under review of IEEE Access, 2021.

2. K. David Huang; Zhong-Ting Cao; Jyun-Ming Jhang; Cheng-Jung Yang*; Po-Tuan Chen*, “Parameter Optimization of Composite Sinusoidal Waveform Charging Strategy for Reviving Capacity of Lithium-ion Batteries”, minor revision of Journal of the Chinese Society of Mechanical Engineers.

3. Nguyen Minh Khoa, Thangavel Sangeetha, Po-Tuan Chen, Ting-Wei Hsu, Wei-Mon Yan, Cheng-Jung Yang* and K. David Huang*, “Improved performance of a zinc-air fuel cell by coupling zinc particle fuel and flowing electrolyte”, accepted by the Journal of the Chinese Institute of Engineers in March 25, 2021.

4. K. David Huang; Cheng-Jung Yang*; Po-Tuan Chen, “Fluidity and Penetration Efficiency of Zn Particles on the Electrochemical Reactions of Zn-Air Fuel cells”, Journal of the Chinese Institute of Engineers, Vol 44, No. 3, 2021.

5. Cheng-Jung Yang; Ming-Huang Chen; Keng-Pei Lin*; Yu-Jie Cheng; Fu-Chi Cheng, “Importing Automated Management System to Improve the Process Efficiency of Dental Laboratories”, Sensors, Vol 20, No. 20, 2020.

6. Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Development of Energy Control System for Parallel Hybrid Power System using Dynamic Equations and Fuzzy Theory”, Advances in Mechanical Engineering, Vol 12, No. 11, 2020.

7. Thangavel Sangeetha; Wei-Mon Yan; Po-Tuan Chen*; Cheng-Jung Yang*; K. David Huang*, “Protection Efficiencies of Surface-Active Inhibitors in Zn-Air Batteries”, International Journal of Energy Research, Vol. 44, No. 14, pp. 11883-11893, 2020.

8. Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Dynamic Simulation and Control of a new Parallel Hybrid Power System”, Applied Sciences, Vol 10, No. 16, 2020.

9. Thangavel Sangeetha; Wei-Mon Yan; Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Electrochemical polarization analysis for optimization of external operation parameters in zinc fuel cells”, RSC Advances, Vol.10, pp. 28807-28818, 2020.

10. Chia-Hung Chou; Po-Tuan Chen; Cheng-Jung Yang*; K. David Huang*, “Functionalization of Wireless Control and Fuzzy Systems to Hybrid Mini-Loaders”, IEEE Access, Vol. 8, No. 1, pp. 80914-80921, 2020.

11. Thangavel Sangeetha^†; Cheng-Jung Yang^†; Po-Tuan Chen^†; Wei-Mon Yan*; K. David Huang*, “Discharge performance of Zn-air fuel cells under the influence of Carbopol 940 thickener”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4543-4555, 2020. ^†These authors contributed equally to this work.

12. Cheng-Jung Yang; Po-Tuan Chen*; K. David Huang*, “The optimization of electrolyte flow management to increase the performance of Zn–air fuel cells”, International Journal of Energy Research, Vol. 44, No. 6, pp. 4224-4234, 2020.

13. Po-Tuan Chen; Fu-Yen Zeng; Xuan-Hao Zhang; Ren-Jei Chung; Cheng-Jung Yang*; K. David Huang*, “Composite Sinusoidal Waveform Generated by Direct Digital Synthesis for Healthy Charging Lithium-ion Batteries”, Energies, Vol 13, No. 4, 2020.

14. Po-Tuan Chen; Pei-Fan Ding; Cheng-Jung Yang*; K. David Huang*, “Hybrid Power System Design for Multifunctional Mini-Loader Vehicles”, Applied Sciences, Vol 9, No. 20, 2019.

15. Cheng-Jung Yang; Tzu-Chun Yang; Po-Tuan Chen*; K. David Huang*, “An innovative design of regional air-conditioning to increase automobile cabin energy efficiency”, Energies, Vol 12, No. 12, 2019.

16. Po-Tuan Chen; Duong Dinh Nghia; Cheng-Jung Yang*; K. David Huang*, “Study of system integral energy efficiency of a hybrid pneumatic power system”, Applied Sciences, Vol 9, No. 11, 2019.

17. Yu-Sheng Lin; Cheng-Jung Yang*, “Spring Assisting Mechanism for Enhancing the Separation Performance of Digital Light Process 3D Printers”, IEEE Access, Vol. 7, No. 1, pp. 71718-71729, 2019.

18. Po-Tuan Chen; Thangavel Sangeetha; Ting-Wei Hsue; Cheng-Jung Yang; Tung-Yuan Yung; Wei-Mon Yan*; K.David Huang*, “Improved performance of a Zn-air fuel cell by coupling Zn particle fuel and flowing electrolyte”, Chemical Physics Letters, Vol. 728, pp.160-166, 2019.

19. Po-Tuan Chen; Da-Jyun Shen; Cheng-Jung Yang*; K. David Huang*, “Development of a Hybrid Electric Motorcycle that Accords Energy Efficiency and Controllability via an Inverse Differential Gear and Power Mode Switching Control”, Applied Sciences, Vol 9, No. 9, 2019.

20. Po-Tuan Chen; Ping-Hao Pai; Cheng-Jung Yang*; K. David Huang*, “Development of Transmission Systems for Parallel Hybrid Electric Vehicles”, Applied Sciences, Vol 9, No. 8, 2019.

21. Cheng Jung Yang; Jahau Lewis Chen*, “Forecasting the Design of Eco-Products by Integrating TRIZ Evolution Patterns with CBR and Simple LCA Methods,” Expert Systems with Applications, Vol.39, No. 3 pp. 2884-2892, 2012.

22. Cheng Jung Yang; Jahau Lewis Chen*, “Energy-saving Eco-innovation Using Eco-product Cases with CBR and TRIZ Tools,” Journal of the Chinese Society of Mechanical Engineers, Vol.33, No.4, pp.305-313, 2012.

23. Cheng Jung Yang*; Jahau Lewis Chen, “Accelerating Preliminary Eco-innovation Design for Products that Integrates Case-Based Reasoning and TRIZ method,” Journal of Cleaner Production, Vol.19, No. 9-10, pp. 998-1006, 2011.

1. 曾啟源、洪楚洋、林憲為、楊政融， “以逆向工程技術加速取得複雜曲面不同製程零件的品質驗收資訊”，2020馬路科技-3D量測應用技術大賽-佳作。

2. 吳欣璇、楊政融， “排水散熱磁磚及其排水與補水系統”，108年度國立屏東科技大學學生實務專題製作競賽工程科技類-第二名。

3. Guan-Lin Chen, Cheng-Jung Yang, Syin-Syuan Wu; “Water-Discharging tile with Heat Dissipation Function and Water Discharging and Replenishing System of the Same”, Silver Medal of 2019 10th International Innovation and Invention Competition.

4. 王啟豪、蕭啟俊、楊政融， “風力發電葉片量測與3D列印之發電效率比對” ，2019馬路科技-3D量測應用技術大賽-冠軍。

5. 賴冠霖、張書熏、蘇建富、楊政融， “應用3D掃描與3D成型技術於古代瓷器修復” ，2019馬路科技-3D量測應用技術大賽-佳作。

6. 劉玄堂、留起家、張育堯、楊政融， “3D列印光固化成型耳道式藍牙耳機之精度檢測分析” ，2019馬路科技-3D量測應用技術大賽-佳作。

7. 周鈺斐、林盈兆、張育堯、楊政融， “利用田口方法探討下照式光固化三維列印機台列印最佳化參數-以人字齒輪為例”，2018馬路科技-3D量測應用技術大賽-優勝。

8. 劉玄堂、張智評、黃柏誠、楊政融， “利用田口方法探討FDM對於列印圓形模型的佳參數化-以球型關節為例”，2018馬路科技-3D量測應用技術大賽-佳作。

9. 楊政融、林育昇， “三維列印機”，2018台灣創新技術博覽會參展-銅牌。

10. 劉玄堂、楊政融， “汽車發電機”，2018經濟部工業局: 3D列印主題創作競賽-品味造型組(A)-佳作。

11. 楊政融， “可調分離力之光固化製程三維列印機器開發”，107年度屏科大教師研發成果競賽智慧生活類-特優。

12. 劉玄堂、張智評、黃柏誠、林宏偉、陳弈均、楊政融， “FDM 3D列印遠端監控系統”，107年度國立屏東科技大學學生實務專題製作競賽工程科技類-第二名。

13. 賴宇勛、張毓麟、林盈兆、楊政融， “3D掃描定位、公差比對與補正研究”，2017馬路科技-3D量測應用技術大賽-佳作。

14. 賴宇勛、張毓麟、林盈兆、楊政融， “應用3D掃描與3D列印技術進行鳥禽類鳥喙修復”，2017全國實務專題創新創意競賽(崑山科大)-佳作。

15. 張育堯、張智評、黃柏誠、林盈兆、周鈺斐、劉玄堂、楊政融， “以工業4.0架構開發之自動化簡易輸送機器”， 106年度國立屏東科技大學學生實務專題製作競賽工程科技類-佳作。