Water Treatment Plant Manufacturers in Udaipur
water Treatment Plant Manufacturer in Bangalore - AlbionEcoTech.com - Water Recycling Company +91 99245 68279. water Treatment Plant in India
X-Flocs operates on the principle of biological/ bacterial treatment. Raw untreated wastewater is sent to X-Flocs reactor using a pre filter screen to prevent any larger debris, plastics etc clogging the reactor . X-Flocs module is a bio reactor fitted with necessary air diffuser and filtration membrane with a pore size ranging from 0.1 micron to 0.06 micron. Residence time of waste water within the reactor is controlled by drawing rate from the membrane module.
Treated water is drawn from the reactor using suitable pump. As the pore size of the membrane is too small to allow any bacteria or other contaminants to pass through, the treated water at the outlet of the membrane is clean with reduced organic content. This water is thereafter is dosed with necessary chlorine and sent for eventual reuse or discharge.
Membrane Bio Reactor Sewage Treatment Plant (MBR)
Moving Bed Bio Reactor Sewage Treatment Plant (MBBR)
Sequence Batch Reactor Sewage Treatment Plant (SBR)
Dissolved Air Flotation System Effluent Treatment Plant (DAF)
Chemical Based Effluent Treatment Plant
Textile Waste water Treatment Plant
Pharmaceutical Waste water treatment plant
Industrial Effluent Treatment Plant
Membrane Bio Reactor Membranes (MBR)
Water Treatment Plant Manufacturer in Hyderabad
Applications
Sewage Treatment
Effluent Treatment
Drinking Water Treatment Plants
Compac Sewage Treatment Plants
Food industries
Water Treatment Plant Manufacturer in Ahmedabad
Advantages
Better COD/BOD reduction compared to ASP, MBBR, FAB and others
Lower sludge production
Higher nutrieAn removal compared to convhAnional process
Lower footprint
Better Treated Water Quality
Advantages of A.MBBR as per its properties
Water Treatment Plant Manufacturer in Chennai
Applications
Textile Industries (Weaving / Dyeing)
Pharmaceutical Industries
Automobile Industries
Sewage Water Treatment
Removal of Heavy Metal
Removal of Ammonia and Nitrates
Up-gradation of Existing plant with minor changes
Water Treatment Plant Manufacturer in Pune
Advantages
Smaller foot print and reduced CAPEX
Remarkable process stability against toxic shock loads
50-400 % higher process efficiency compared to conventional technologies
Lower Energy Consumption
Reduced Sludge Production
Improved clarifier operation
Better results under varying operating conditions
Moving Bed Bio Reactor Process (MBBR)
M-Flocs technology employs thousands of polyethylene bio film carriers operating in mixed motion within an aerated wastewater treatment basin. Each individual bio carrier increases productivity through providing protected surface area to support the growth of heterotrophic and autotrophic bacteria within its cells. It is this high-density population of bacteria that achieves high-rate biode gradation within the system, while also offering process reliability and ease of operation.
This technology provides cost-effective treatment with minimal maintenance since MBBR processes self-maintain an optimum level of productive bio film. Additionally, the bio film attached to the mobile bio carriers within the system automatically responds to load fluctuations.
Water Treatment Plant Manufacturer in Jaipur
Applications
Sewage Treatment
Effluent Treatment
Food industries
Nominal Parmeter Industry
Water Treatment Plant Manufacturer in Lucknow
Advantages
Compact units with small size.
Increased treatment capacity.
Complete solids removal.
Improved settling characteristics.
Operation at higher suspended biomass.
Concentrations leading to long sludge retention times.
Enhanced process stability.
Low head loss.
No filter channelling.
No need of periodic back washing.
Reduced sludge production and no problems with Sludge bulking.
Life of carrier media up to 10 years.
Sequencing Batch Reactor (SBR)
Sequencing Batch Reactor (SBR) is an advanced technology that uses a fill and draws activated sludge system for wastewater treatment. It is best for treating both industrial and municipal wastes. The main difference between SBR technology and other STP technologies is that SBR uses a single batch reactor/single tank to process the equalization, aeration, and clarification compared to other technologies that use different batch reactors for various processes.
Water Treatment Plant Manufacturer in Kanpur
Applications
Effluent with a wide range of inflow and/or organic loadings
Effluent that require minimal operator attention
Effluent that require extremely close control of effluent quality, such as for removal of nutrients
Sewage in small to medium size communities
Effluent in industries with high BOD loadings such as food processing, dairies and chemical plants.
Water Treatment Plant Manufacturer in Nagpur
Advantages
Because SBR technology uses storage and batching system, the effluent can be stored at peak periods and treated in smaller batches throughout the course of any given day. This means each batch is given full treatment time and peak surges are avoided.
An SBR tank is operated by air power generated by blower/compressor, which means there are no moving parts of electrical components inside the tank itself. This reduces maintenance and replacement costs and makes for a more efficient operation.
There is no need for final sedimentation tanks or return activated sludge pumping as everything is conducted within a single tank. This also means SBR systems take up a smaller footprint as fewer tanks are required.
Check out gallery
