We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
Updated: 2026-09-20 · 7 min read · Independent comparison
If you want to replace a worn or too-short cable on your Pioneer HDJ500, HDJ700 or HDJ1500 headphones, choose Voarmaks Audio DJ Headphone; if you need an actual microphone for singing, streaming or recording, choose BietrunPro Xlr Usb Dynamic.
• Voarmaks Audio DJ Headphone — biggest strength: a coiled spring cable that runs about 1.06 m naturally and stretches to roughly 3 m, with a locking headphone-end connector and a 6.3 mm adapter plug. Biggest trade-off: it is a single-purpose replacement cable, not a piece of gear you can use on its own, and it only fits the listed Pioneer HDJ models.
• BietrunPro Xlr Usb Dynamic — biggest strength: one microphone with two output paths (XLR and USB-C), a 3.5 mm monitoring jack, on-body gain control, and a bundle that includes a metal desk stand, pop filter and a 16.5 ft XLR cable. Biggest trade-off: it is a dynamic unidirectional mic, so it is not a silent, plug-in-and-forget webcam-style solution, and it is corded only.
• Pick Voarmaks Audio DJ Headphone if you already own Pioneer HDJ500, HDJ700 or HDJ1500 cans and just need a longer, sturdier cable that stays locked in while you move.
• Pick BietrunPro Xlr Usb Dynamic if you are building a vocal, podcast or streaming setup from scratch and want mic, stand, filter and both cable types in one box.
• These two products are not really rivals. One is a cable. One is a microphone. The reason people search them side by side is that both sit in the DJ/pro-audio corner of the market and both get bought by people setting up a booth or a home studio. So the honest way to compare them is to figure out which gap in your setup you are actually trying to fill.
The Voarmaks Audio DJ Headphone is, despite the name, a cable — specifically a replacement cord and plug for Pioneer HDJ500, HDJ700 and HDJ1500 professional DJ headphones. The headline spec is reach: about 1.06 meters at rest, with a coiled spring structure that extends up to roughly 3 meters. That coil matters more than it sounds. A straight cable on a DJ booth gets yanked, looped around your wrist, or caught under a flight case. A coiled cable keeps the slack tidy when you are close to the mixer and still lets you step back or reach across the booth without dragging your headphones off your head.
The second thing worth knowing is the locking structure at the headphone end. If you have ever had a cable pop out mid-set because someone brushed past you, you know why this is the feature that sells the product. Combine that with the 6.3 mm adapter plug and you have a cable that goes from a 3.5 mm-style headphone connection out to a quarter-inch jack without a separate adapter rolling around in your bag. The 24K gold connectors are there for signal integrity, and the item is listed as an 80 g braided round cable.
Buy it if you own one of the three listed Pioneer models and your current cable is too short, crackly, or keeps disconnecting. Skip it if you own any other headphone brand, if you need a straight cable for studio work, or if you were expecting an actual pair of headphones — the title is easy to misread, and this is the cord only.
BietrunPro Xlr Usb Dynamic: Who It's For
The BietrunPro Xlr Usb Dynamic is a unidirectional dynamic microphone built for singing, recording, voice-over, streaming and podcasting. The core specs are a 40 Hz–20 kHz frequency response, -51 ±3 dB sensitivity, a 92 dB signal-to-noise ratio and 600-ohm impedance. In plain terms: this is a front-addressing dynamic capsule that picks up what is in front of it and pushes down what is behind and beside it. That is exactly the behavior you want in an untreated room — a bedroom, a spare office, a kitchen table — because it will not pull in as much of the room as a wide-pattern condenser would.
The part I find genuinely useful is the dual output design. There is an XLR path for audio interfaces, mixers and sound cards, and a USB-C path for desktops, laptops, MacBooks and OTG-enabled Android phones. The bundle covers both: a 16.5 ft XLR cable plus USB-A-to-C and C-to-C cables. No drivers are needed on the USB side. So the same mic can live on a proper interface today and plug straight into a laptop tomorrow when you are travelling or recording somewhere without your interface.
Around the body of the mic you get a gain knob at the bottom for mic and headphone level, and a 3.5 mm headphone jack for zero-latency monitoring. That combination is what makes it usable for singing and gaming rather than just talking — you can hear yourself in real time and adjust on the fly instead of fixing levels after the take.
It also ships as a kit rather than a bare mic: an all-metal desktop stand adjustable from 8.5 to 16 inches with a 180° tilt range, a detachable double-layer pop filter, and a mic clip with a 1/4-inch screw port so you can move it to a boom arm or floor stand later. Power is corded electric — there is no battery to manage.
Buy it if you want one microphone that works on both a traditional XLR chain and a plain USB connection, and you would rather not buy a stand, filter and cables separately. Skip it if you need a wireless mic, a multi-channel or stereo setup, or you already own a premium interface-and-mic chain and only want to upgrade one link.
• Best for replacing a broken Pioneer HDJ cable → Voarmaks Audio DJ Headphone. It is built for exactly three headphone models and nothing else.
• Best for a complete first recording setup → BietrunPro Xlr Usb Dynamic. Mic, stand, pop filter and both cable types arrive together.
• Best for reach and movement → Voarmaks Audio DJ Headphone. Roughly 1.06 m natural, extending to about 3 m on the coil.
• Best for connection flexibility → BietrunPro Xlr Usb Dynamic. XLR for interfaces and mixers, USB-C for computers and OTG Android phones.
• Best for staying plugged in under pressure → Voarmaks Audio DJ Headphone. The locking headphone-end connector plus the 6.3 mm adapter plug is the whole point of the design.
• Best for real-time self-monitoring → BietrunPro Xlr Usb Dynamic. The 3.5 mm jack gives zero-latency monitoring with its own gain control.
• Best for a fixed, tidy desk setup → BietrunPro Xlr Usb Dynamic. The adjustable metal stand and 180° tilt let you set an angle and leave it.
• Best for travel and gig bags → Voarmaks Audio DJ Headphone. At 80 g it is a spare part you can keep in a pouch; the mic kit is a desk fixture.
My Verdict
No. Despite the title, it is a replacement cable and plug for Pioneer HDJ500, HDJ700 and HDJ1500 headphones. If you need the headphones themselves, this is not that product.
Yes. The USB-C output mode is plug and play with desktops, laptops, MacBooks and OTG-enabled Android phones, with no drivers required. The XLR output is there if you later add an interface, mixer or sound card.
For a beginner building a booth or home studio, the BietrunPro bundle covers more ground because it includes the microphone, stand, pop filter and both cable types. The Voarmaks cable only makes sense if you already own the compatible Pioneer headphones.
Only if they are Pioneer HDJ500, HDJ700 or HDJ1500. It is designed around those models, and the locking connector at the headphone end is specific to that fit.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.