How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a long, stretchy coiled DJ cable that locks into Pioneer-style headphone sockets and lets you move around a booth freely, choose Voarmaks 4; if you need a shorter, everyday replacement cable built for Audio-Technica ATH-M50X (and the M40X/M50X/M60X/M70X family) that also plays nicely with phones, laptops and consoles, choose Zosvoses ATH-M50X.
• Voarmaks 4 — biggest strength: a coiled spring design that stretches to 3 meters, with a locking mechanism at the headphone end and a 3.5mm plug plus 6.3mm adapter in the box.
• Voarmaks 4 — biggest trade-off: it's built specifically around Pioneer HDJ-series sockets (HDJ-X7, X5, CUE1, S7, CX), so it's the wrong tool if your headphones use an Audio-Technica-style 2.5mm inlet.
• Zosvoses ATH-M50X — biggest strength: a 1.5m (4.9 ft) oxygen-free copper cable with 24K gold-plated connectors, strain relief at every joint, and a 6.35mm adapter for studio gear.
• Zosvoses ATH-M50X — biggest trade-off: at roughly 1.5 meters it's deliberately short, so it suits desk and handheld use far better than pacing across a stage.
• Choose Voarmaks 4 if you're a DJ or studio user with Pioneer HDJ headphones who wants reach, a locking connection and a cable that survives constant coiling.
• Choose Zosvoses ATH-M50X if you own Audio-Technica ATH-M40X/M50X/M60X/M70X headphones and want a tidy replacement lead for mixing, gaming or listening on the move.
The Voarmaks 4 is a purpose-built DJ cable, not a generic aux lead. Its defining feature is the coiled spring construction: the cable runs roughly 3–4mm in diameter and stretches up to 3 meters, which is the whole point. In a booth, that reach matters. You can set your headphones down, step to the mixer, reach for a record or a controller, and the cable follows you instead of yanking the plug out of your ear cup. When you're done, it recoils back into a compact coil instead of turning into a tangled snake on the floor.
The second thing that stands out in the spec sheet is the locking mechanism at the headphone end. Voarmaks pairs that with 24K gold-plated connectors and a twist-lock design, and rates the cable for up to 1.2 million bends. I read that figure as a durability claim about the connector and strain area rather than something a buyer should try to verify — but it tells you the design intent: this is a cable meant to be plugged in, twisted to lock, and left alone through thousands of gigs and sessions. The braided outer material backs up that same idea, since braid resists the scuffing and abrasion that a coiled cable takes when it's dragged across a table edge or coiled around a stand.
Who should skip it? Anyone whose headphones use a 2.5mm screw-in inlet — Audio-Technica's M-series, for example — because this cable isn't specified for that. I'd also steer casual listeners away. If you just want to plug headphones into a phone on the bus, a 3-meter coil is more cable than you need, and the extra bulk works against you.
Zosvoses ATH-M50X: Who It's For
Where the Voarmaks cable is about reach, the Zosvoses ATH-M50X is about control. It's a 1.5-meter (4.9 ft) cable — the spec sheet also lists 59 inches, which is the same length — and that shorter run is exactly what you want at a desk, on a couch or in front of a console. It stays tidy, it doesn't pool in your lap, and it doesn't snag on chair arms.
The headline spec here is the conductor: high-purity oxygen-free copper (OFC) with a twisted-pair structure. OFC is the standard choice for reducing signal loss, and the twisted-pair geometry is there to suppress electromagnetic and radio-frequency interference from the electronics around you — your laptop, your monitor, your console. The stated goal is clean, balanced sound with no static and no distortion, and Zosvoses describes the tuning as preserving the ATH-M50X's original character: rich bass, clear midrange, delicate treble. That's a claim about design intent rather than a measured result, but the OFC-plus-twisted-pair combination is a sensible, well-understood way to chase it.
Durability is handled differently than on the Voarmaks. Instead of a locking collar and a bend rating in the millions, Zosvoses uses protective strain relief rings at the plug, the 3.5mm jack and the adapter connectors, plus a soft PVC jacket that resists tangling, kinking and abrasion. The sheet cites over 10,000 bend tests, and the connectors are 24K gold-plated to resist oxidation and corrosion. At 5 grams, this is a light cable — the kind you forget is there.
The compatibility list is broader than you might expect from a replacement cable. It's built for Audio-Technica ATH-M40X, ATH-M50X, ATH-M60X and ATH-M70X headphones, with a 2.5mm-to-3.5mm arrangement and a 6.35mm adapter. That 3.5mm plug also works with smartphones, laptops, tablets, MP3 players, PS5 and Xbox Series X/S consoles, and portable DACs, while the 6.35mm adapter reaches studio mixers, power amplifiers, DJ consoles, home theater systems and other pro gear. So it's a two-job cable: fix your Audio-Technica headphones, and double as a general-purpose aux lead.
Who should skip it? If you're a working DJ with Pioneer HDJ headphones, this isn't your cable — the fit and the locking mechanism aren't there, and 1.5 meters won't get you across a booth. You should also skip it if you specifically want a coiled cable that stays out of the way without being managed; this one is straight and short.
• Best for cable reach and freedom of movement → Voarmaks 4. The coiled design stretches to 3 meters, which is roughly double the Zosvoses length.
• Best for a tidy desk, gaming or travel setup → Zosvoses ATH-M50X. At 1.5m it stays out of the way instead of pooling on the floor.
• Best for Pioneer HDJ-X5, X7, S7, CUE1 and CX owners → Voarmaks 4. It's specified for those models, with a locking headphone-end connection.
• Best for Audio-Technica ATH-M40X, M50X, M60X and M70X owners → Zosvoses ATH-M50X. That's the exact compatibility list.
• Best for a secure, locked connection that won't pull loose → Voarmaks 4. The twist-lock at the ear cup is the standout feature.
• Best for use with phones, laptops and PS5/Xbox → Zosvoses ATH-M50X. The 3.5mm plug is explicitly listed for those devices.
• Best for studio mixers, amps and pro gear → both, via their 6.3mm adapters. Each ships with one; the difference is cable length and connector style.
• Best for a lightweight, low-hassle cable → Zosvoses ATH-M50X. It weighs 5 grams and uses a soft PVC jacket that resists tangling and kinking.
In my opinion, the decision comes down to one question: which headphones are you plugging in? If you own Audio-Technica M-series cans, I'd buy the Zosvoses ATH-M50X. It's the cable that actually fits, the OFC and twisted-pair build is the right approach for clean signal, and the 1.5m length plus strain relief makes it a better daily driver for mixing, gaming and listening. If you're on Pioneer HDJ headphones and you work in a booth, I'd buy the Voarmaks 4 instead — the 3-meter coil and locking connector solve problems the Zosvoses cable isn't designed to solve. Buy for the socket, not the spec sheet envy.
FAQ
Yes. The 3.5mm plug is listed as compatible with PS5, Xbox Series X/S, smartphones, laptops, tablets, MP3 players and portable DACs. The included 6.35mm adapter extends that to studio mixers, amplifiers and DJ consoles.
For booth work with Pioneer HDJ headphones, I'd pick the Voarmaks 4. Its coiled design stretches to 3 meters and the headphone end locks in place, so it won't pull free while you move. The Zosvoses cable is shorter and better suited to stationary setups.
I don't list prices here because they change often. Use the "Check latest price on Amazon" button on this page to see the current price for either cable before you decide.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.