M. Tech. Theses Supervision at I. I. T. Kanpur
1. Parameswari G, Design And Development Of Mrf Process For Nanofinishing Of Ti6al4v Discs, March-2017, (Co-supervisor: Dr. J. Ramkumar)
2. Akash Tyagi, Experimental Investigation into Wire Electrochemical TurningProcess, (supervisor: Dr. J. Ramkumar) (To be submitted)
3. Prachi Dixit, Modeling and experimental verificationof tool wear inElectric discharge micro drilling, July 2016.
4. Jayant, Modeling and simulation of MRAFF process, June 2016.
5. Ankit Kumar Choukesey, Modeling of electrolyte conductivity during electrochemical machining, July 2015.
6. Sahil Kajal, Investigations into internal magnetic abrasive finishing of a revolver barrel, August 2015. (Dr. J. Ramkumar as a co-supervisor).
7. Jitendra Kumar, Fabrication of circuits using electrochemical micromachining on PCB, (Co-supervisor: Prof. J. Ramkumar), Dec. 2013.
8. Mithun Sarkar, Nanofinishing of freeform surfaces by abrasive flow finishing (AFF) process, Sep. 2013.
9. Satish Kumar, Nanofinishing of freeform surfaces by magnetorheological abrasive flow finishing process, August 2013.
10. Vishnu Suthar, Fabrication of Micro Tapered Pillars on Titanium Using Electric Discharge Micromachining, August 2012.
11. Pawan Kumar, Magnetorheological finishing of helicopter bearing races, July 2012.
12. C.S. Sathua, “Magnetic abrasive finishing with a ball –end tool and force analysis, (Co-supervisor: Prof. J. Ramkumar), Nov. 2011.
13. Sweta Singh, “Experimental investigations into electrochemical microdrilling using insulated tool and masked workpiece”, (Co-supervisor:Prof. SKChoudhury), Dec. 2011.
14. Dileep Gehlot, Anode shape prediction in through-mask-ECMM using FEM, July 2011.
15. Anurag Thakur, Fabrication of micro moulds using electrochemical micromachining,,January 2011.
16. Prabhat Ranjan, Development of Nanofinishing Technology for Si Substrate, August, 2009 (Dr. V.K.Suri, Co-supervisor)
17. A.K.S.Chauhan, “micro tool fabrication using electrochemical micromachining”, August 2009.
18. Pankaj Singh, Experimental Investigations into Magnetorheological Abrasive Finishing (MRAF) Process, July 2008.
19. Puneet Kumar, Modeling of Surface Finish in Magnetorheological Abrasive Finishing (MRAF) Process, July 2008.
20. Rajesh D. Madharker “Investigations into Magnetic Abrasive Deburring (MADe)”. November 2007.
21. Priyadarshani Deepshikha “Generation of micro channels on ceramics using Electrochemical Spark Machining”. June 2007.
22. Aatish Chavan, “Investigation into Contoured Hole Drilling using Shaped Tube Electrochemical Drilling (STED) Process” , October2006. (Mrs. Anjali Kulkarni, Co-supervisor)
23. Ashish Nayak, “Investigations into machining of Superalloys (Inconel and Titanium-alloy) using Abrasive Waterjet Cutting”, August 2006 (Dr. V. Raghuram, Co-supervisor).
24. S.Seshank "Micro fabrication using Electric Discharge Deposition Process", July 2005
25. Vinod Kumar "Force and surface roughness analysis of Magnetic Abrasive Finishing process (MAF) using non-ferromagnetic and ferromagnetic workpiece materials", July 2005.
26. K.K Saren, “Force Analysis of Magnetic Abrasive Finishing Process of non-Ferromagnetic Materials”, Aug. 2004 (Co-Supervisor : Dr. V. Raghuram).
27. Manas Das, “Analysis of Magnetorheological Abrasive Flow Finishing (MRAFF) Process”, July 2004.
28. Sanjoy Adhikary, “Some new observations in Elector-Chemical Spark Machining (ECSM) of Quartz”, May 2003.
29. Hirak Jyoti Gayen, "Computer Aided Process Planning for rotational parts using Genetic Algorithms", July, 2002 (with Prof. K. Deb as co-supervisor)
30. Rakesh G. Mote " Electro-Discharge Abrasive Grinding (EDAG) Process ", March 2002.
31. Amitabh Parashar, “ Interactive Computer Assisted Part Programming for CNC lathe”, Feb.2002.
32. G. Benu Madhav, "Finite Element Analysis of Magnetic Abrasive Finishing Process", June 2000 (Co-supervisor: Prof. P. M. Dixit, ME).
33. Santosh P. Sharma, "Deep Hole Drilling in High Speed Steel Using Electro-Chemical Machining", May 2000 (Supervisor: Dr. Rajiv Shekhar, MME).
34. Pabitra K. Behra, "Experimental Investigations into Magnetic Abrasive Finishing Process", Dec. 1999 (Co-supervisor: Prof. Prashant Kumar, ME).
35. D. Sridhar Sastry, "Electro-Stream Drilling of High Speed Steel", July 1999 (Co-supervisor: Dr. Rajiv Shekhar, MME).
36. Amreesh Agrawal, "On the Determination of the Viscosity of AFM Media", March 1999 (Co-supervisor: Prof. K. Murlidhar, ME).
37. K. M. Ramesh, "Electro Chemical Spark Machining Using Abrasive Cutting Tools", Nov. 1998 (Co-Supervisor: Prof. S.K.Choudhury)
38. N. Shiva Rama Krishna, "On-line Monitoring of Tool Wear and Control of Dimensional Inaccuracy in Turning", Aug. 1998 (Supervisor: Prof. S. K.Choudhury, ME).
39. T. Rajani Kumar, "Theoretical and Experimental Investigations into Abrasive Flow Machining Process", July 1998 (Co-supervisor: Prof. P. M.Dixit, ME).
40. Arvind Shukla, "Measurement of Hydrogen content using nuclear technique and evaluation of its effects on EDM’d components", 1998 (Co-supervisor: Dr. V. N. Kulkarni, PHY).
41. Bikram K. Gupta, "Tool Selection and Bend Sequencing for Air Bending of Sheet Metal Components", April 1998
42. Vivek Kumar, "Electric Discharge Abrasive Drilling of Cemented Carbide and HSS", April 1998
43. Ch. V. V. Ramarao, "On-line Monitoring of Tool Wear in Turning Using Neural Network", Feb. 1997 (Supervisor: Prof. S. K.Choudhury, ME).
44. Sunil Jha, "On the Abrasive Flow Machining (AFM) Process Performance", April 1998 (Co-supervisor: Prof. S. K.Choudhury, ME).
45. Subodh Kulkarni, "Effect of Strain Acceleration on Plastic Deformation Behavior of Aluminium", Jan. 1999 (Co-supervisor: Dr. Om Prakash, ME).
46. C. Rangnath, "On the Evaluation of Rheological Properties of Media Used in Abrasive Flow Machining (AFM)", Oct. 1997.
47. M. S. Ankulkar, "Electric Discharge Diamond Drilling of Cemented Carbides", Aug. 1997.
48. Manoj Singh, "Effect of Porosity and Glass Content on Machining of Alumina Ceramics by Electro Chemical Spark Machining (ECSM)", July 1997 (Co-supervisor: Prof. D. C. Agrawal, MSP).
49. H. Rammohan, "Object Oriented Feature Based Tool Selection System for Sheet Metal Components", April 1997 (Co-supervisor: Prof. Kripa Shanker, IME).
50. Sanjay Kumar Chak, "Electro-Chemical Spark Machining (ECSM) of Alumina and Quartz", May 1996.
51. Shashikant G. Adsul, "Experimental Investigations into Abrasive Flow Machining (AFM) at Low Pressure", Feb. 1996
52. Pulak Mohan Pandey, "On the Mechanism of Sparking and Finite Element Simulation of ECSM Process", March 1995 (Co-supervisor: Prof. P. M. Dixit, ME).
53. Anand Satyadev, "Flat Pattern Development for Bent and Deep-drawn Sheet Metal Components", March 1995.
54. Naveen Gautam, "Experimental Investigations for the Enhancement of ECDM Process Capabilities Using Various Tool Kinematics", Jan. 1995.
55. Vivek V. Nesarikar, "Travelling Wire Electro-Chemical Spark Machining of Kevlar-Epoxy Composites", July 1994 (Co-supervisor: Prof. S. K.Choudhury, ME). [Paper based on this thesis won the Best Paper Award in 16th AIMTDR Conference held in Banglore in Dec. 1994]
56. Chordia Yogenrda D., "Automatic Feature Extraction and Process Planning for 3-D Machining of Prismatic Components", March 1994 (Co-supervisor: Prof. J. L. Batra, IME).
57. A. K. Garg, "Computer Aided Process Planning (CAPP) for Eletro Discharge Machining (EDM)", April 1993 (Co-supervisor: Prof. J. L. Batra, IME).
58. Prem Shankar, "Analysis of Spark Discharge in EDM Process", April 1994 (Co-supervisor: Dr. T. Sundararajan, ME).
59. Yatinder Pratap Singh, "Design and Fabrication of Travelling-Wire Electro-Chemical Spark Machine and Machining of Piezoelectric Ceramics (PZT)", July 1993 (Co-supervisor: Prof. D. C. Agrawal, MSP).
60. Piyush Agarwal, "On Two-dimensional Nesting Problems", April 1992 (Co-supervisor: Prof. S. G. Dhande, ME).
61. Lt. Pravin Dixit, "On the Feasibility of Application of Fiber-Optics in Profile Measurement", Feb. 1992 (Co-supervisor: Prof. S. K.Choudhury, ME).
62. Lt. V. Ravindranath, "Experimental Investigations into Reproduction of Profiles in Electrochemical Drilling", Feb. 1992 (Co-supervisor: Prof. J. L. Batra, IME).
63. Ranen Bhattacharya, "Numerical Simulation of EDM Process", Jan. 1992 (Co-supervisor: Dr. P. S. Ghoshdastidar).
64. Philip Koshy, "A Study on Rotating Disk Type of Tool for EDM", Sep. 1989 (Co-supervisor: Prof. G. K. Lal, ME).
65. Sanjay Kumar Verma, "Effect of Shear Strain Acceleration on Material Properties of Aluminium", Aug. 1989 (Co-supervisor: Prof. Prashant Kumar, ME).
66. G. Sankara Narayana, "Computer Aided Process Planning for Machining of Rotational and Prismatic Parts", March 1989 (Co-supervisor: Prof. Kripa Shanker, IME).
67. V. Srinivas Anand, "Multi-objective Optimization of Electro-Discharge Machining (EDM) Process", March 1989 (Co-supervisor: Prof. J. L. Batra, IME).
68. Gurusaran, "Computer Aided Process Planning for Electrochemically Machined Components", Feb. 1989 (Co-supervisor: Prof. J. L. Batra, IME).
69. M. Radhakrishnan, "Design and Development of Process Planning System and Cutter Path Simulation for Rotational Components", Jan. 1989 (Co-supervisor: Prof. Kripa Shanker, IME).
70. Anuj Sanjanwala, "On-line Wear Sensing and Compensation during Turning Operations", Jan. 1989 (Co-supervisor: Prof. S. K. Choudhury, ME).
71. P. Madhu, "Finite Element Analysis of Electro-Discharge Machining Process", Nov. 1988 (Co-supervisor: Dr. T. Sunararajan, ME).
72. P. Sreenivasa Rao, "Application of Travelling Wire-ECSM Process for Machining of Composites", Sep. 1988 (Co-supervisor: Prof. S. K. Choudhury, ME).
73. M. Satheesha, "Machining of Fibre Composites and Development of a Quick Stop Device", Sep. 1988 (Co-supervisor: Prof. Prashant Kumar, ME).
74. Girish Thakar, "Design and Development of Database for Process Planning and NC Part Program Generation for Rotation Components", June 1988 (Co-supervisor: Prof. Kripa Shanker, IME).
75. Ajay Kumar Chitta, "A Decision Support System for Process Planning", July 1987 (Co-supervisor: Prof. Kripa Shanker, IME).
76. Vilas S. Joshi, "Viscoplastic Analysis of Metal Cutting by Finite Element Metjod", July 1987 (Co-supervisor: Prof. P. M. Dixit, ME).
77. Sanjiv Tandon, "Machining of Composites- A New Approach", July 1987 (Co-supervisor: Prof. Prashant Kumar, ME).
78. Yashwant Kanetkar, "Stray Current and Stagnation Zone Analysis in ECD During Outward Mode of Electrolyte Flow", July 1987 (Co- supervisor: Prof. G. K. Lal, ME).
79. V. N. Vittal, "A Computer Aided Process Planning System for Rotational Parts in FMS Environment", March 1987 (Co-supervisor: Prof. Kripa Shanker, IME).
80. K. Ravi Raju, "Two-dimensional Finite Element Analysis for Tool Design in ECM", March 1987 (Co-supervisor: Prof. G. K. Lal, ME).
81. Gajendra Kumar Adil, "Temperature Analysis of Accelerated Cutting: Finite Element Approach", March 1987 (Co-supervisor: Dr. T. Sunararajan, ME).
82. Sachindra Kumar Purwar, "Analysis of Plastic Deformation Characteristics During Metal Cutting by Finite Element Method", March 1987 (Co-supervisor: Dr. T. Sunararajan, ME).
83. Sanjay Kumar, "Investigations into Microhardness of Chips During Accelerated Cutting", Jan. 1987 (Co-supervisor: Prof. G. K. Lal, ME).
84. Gopal Indurkhya, "Some Investigations into Electro Discharge Drilling Process", May 1985.
85. S. Murugan, "Prediction of Anode Profile in ECBD and ECBB Operations", April 1985.
86. P. G. Yogindra, "Two-dimensional Finite Element Analysis of Electro Chemical Drilling Process for Anode Shape Prediction", March 1985.
87. B.K.Gupta, (Co-Advisor: Late Prof. H.C.Agrawal):
88. Girish Acrarya, "Multi-objective Optimization of Electro-Chemical Machining (ECM)", Dec. 1984 (Co-supervisor: Prof. J. L. Batra, IME).