The VirtuCLEAN is a two-step procedure
- The very first thing you will do is detach the tubing from your CPAP machine with the face mask/ nasal pillows still connected to the other end of the CPAP tubing.
- Next you put place the face mask/ nasal pillows part of the CPAP devices into the luggage that came with your VirtuCLEAN CPAP mask sanitizing device and zip the luggage up-- (leaving a part of the tubing lacking the travel bag). Then link the VirtuCLEAN to the other end of the tubing. --( this is the part of the tubing that was previously connected to the CPAP device.).
- Then you will turn the VirtuCLEAN CPAP and mask cleaning machine on and allow it to run its 30-minute sanitation cycle. Which will be followed up with a 5-minute fresh air flush cycle, where the gadget pushes fresh air through the CPAP tool to help dissipate any staying smell or ozone that may still be remaining.
- First you need to do is empty the humidifier chamber of its water.
- Thent you need to detach the mask part of your CPAP tool from the tubing. And attach the VirtuCLEAN CPAP and mask cleaning tool to this end of the tubing.-- (The humidifier chamber ought to still be linked to your CPAP maker; the tubing should also still be linked to the CPAP tool as well, with the VirtuCLEAN CPAP mask sanitier device linked to the other end of the tubing.).
- Now you turn the VirtuCLEAN CPAP and mask cleaner device on and allow it to run its 30-minute disinfecting cycle. Which will be followed up with a.
5 minutes fresh air flush cycle, where the tool presses fresh air through the CPAP devices to assist dissipate any staying smell or ozone that might still be remaining.
- Recommendations: We recommend that this step is done a minimum of once a week.