The impeller is the rotating component within the centrifugal pump design, which transfers the energy from the pump's motor to the fluid. 

C.I. | C.S. | SS 304 | SS316 | S.S 410 | BRONZE

Pump casings serve to seal off the intside of the pump to atmosphere to prevent leakage and retain pressure. 

C.I | CAST STEEL | S.S 316 | S.S 304 | S.S 410 | BRONZE

Pump casings serve to seal off the intside of the pump to atmosphere to prevent leakage and retain pressure  

  C.I. | CAST STEEL | S.S 316 | S.S 304 | S.S 410 | Bronze

The pump shaft is the central component of a centrifugal pump rotor and carries the impellers. 

EN8 | EN19 | C-40 | S.S 410 | S.S 314 | S.S 316 

A shaft sleeve is a cylindrical hollow metal tube placed over the shaft to protect as it passes through the packing 

  EN8 | EN19 | C.I | S.S 410 | S.S 304 | S.S 316 | Bronze.

Pump bearing housing lubrication, constant level oiler Bearing housing is a major component of the pump Bearings  

  C.I. | CAST STEEL | S.S 316 | S.S 304 | S.S 410 | Bronze

The gland nut allows the packing material to be compressed to form a watertight seal and prevent water leaking up the shaft when the tap is turned on

  Graphite | PTFE | Cartbon | Asbestos | Cotton Yarn

An impeller is a rotating component of a centrifugal pump that accelerates fluid outward from the center of rotation, thus transferring energy from the motor that drives the pump to the fluid being pumped 

The O-ring may be used in static applications or in dynamic applications where there is relative motion between the parts and the O-ring.