How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a more technically ambitious in-ear built around a dual-driver design and a wider frequency range, choose TRUTHEAR x Crinacle Zero; if you need a simpler single-driver IEM with a detachable OFC cable and a no-fuss wired setup, choose Linsoul 7Hz.
• TRUTHEAR x Crinacle Zero — biggest strength: A dual dynamic-driver architecture with a DLP-3D printed cavity, a hybrid two-way frequency division, and a rated frequency range out to 39,500Hz. In my opinion this is the more ambitious, more "engineered" earphone of the two.
• TRUTHEAR x Crinacle Zero — biggest trade-off: It is the fussier ownership experience: a recessed 0.78 2-pin socket, a 10-ohm impedance, and a design story built around construction processes rather than simplicity.
• Linsoul 7Hz — biggest strength: A straightforward, current-generation single 10mm dynamic driver in an in-ear shell, paired with an OFC cable and a plain 3.5mm wired connection. Easy to live with.
• Linsoul 7Hz — biggest trade-off: A 20Hz–20,000Hz rating and a single driver mean less headroom and less flexibility than the dual-driver TRUTHEAR on paper.
• Who each pick is for: TRUTHEAR x Crinacle Zero for the listener who cares about driver topology, phase consistency and cable rolling; Linsoul 7Hz for the listener who wants a clean, simple wired IEM for music and gaming without thinking about it.
The TRUTHEAR x Crinacle Zero is the earphone you buy when the inside matters to you. It runs two dynamic drivers per side, each with a polyurethane suspension composite liquid-crystal dome diaphragm and an N52 magnet in a double-cavity internal magnetic circuit. The two drivers are split by what TRUTHEAR describes as a hybrid double frequency division, formed from a filtered acoustic nozzle and a calculated RC network, so each driver handles its own slice of the range instead of both trying to do everything.
The housing is the other half of the story. The cavity is DLP-3D printed — the kind of process usually reserved for high-end multi-driver models and custom earphones — and finished with a glue-dropping capping process that is UV-cured, hand-polished and varnish-sprayed. The result is a sandwich structure (front cavity, decorative panel, capped top) in blue, with a red carrying case in the box. The rated range runs from 20Hz to 39,500Hz, impedance is 10 ohm, the nozzle is a recessed 0.78 2-pin female socket, and the stock cable is four strands of silver-plated copper.
Linsoul 7Hz: Who It's For
The Linsoul 7Hz x Crinacle Zero takes the opposite approach: one updated 10mm dynamic driver, one job, done. The shell is an in-ear design with rounded tips in metal and plastic, finished in silver, and it connects over a standard 3.5mm wired jack with a remote on the cable. The rated frequency range is 20Hz to 20,000Hz — the full audible band, stated plainly, with no attempt to claim extension beyond what you can hear.
The headline accessory is the cable. Linsoul ships it with an OFC IEM cable, and the product name itself references the brand's Tripowin Zonie cable line, which tells you the cable is treated as part of the product rather than an afterthought. For a musician or a gamer who is going to be plugging into a phone, a controller, a laptop or a small interface, that matters more than exotic driver topology.
Buy it if you want a single-driver IEM with a copper cable included, a silver metal-and-plastic shell, and a wired 3.5mm connection that works with basically anything. It's aimed at musicians, gamers and everyday listeners who want one dependable pair. Skip it if you specifically want multiple drivers per side, a detachable 2-pin cable you can swap, or a rated range that extends past 20kHz. Those aren't failures — they're just not what this earphone is built to do.
• Best for driver design and technical ambition → TRUTHEAR x Crinacle Zero. Two dynamic drivers per side with a hybrid frequency division versus one 10mm driver.
• Best for simplicity and plug-and-play → Linsoul 7Hz. One driver, one 3.5mm jack, one remote, no connector decisions to make.
• Best for cable swapping and upgrades → TRUTHEAR x Crinacle Zero. The recessed 0.78 2-pin socket lets you change cables; the included four-strand silver-plated copper cable is just the starting point.
• Best for a cable you won't need to replace → Linsoul 7Hz. The OFC cable is part of the package and matches the earphone.
• Best rated frequency range → TRUTHEAR x Crinacle Zero. 20Hz–39,500Hz versus 20Hz–20,000Hz on the Linsoul.
• Best for low-impedance sources and easy drive → TRUTHEAR x Crinacle Zero on paper, at a rated 10 ohm — though that same low figure means it's more sensitive to what you plug it into.
• Best for musicians and gamers who want one wired pair → Linsoul 7Hz. The design and included cable are pointed squarely at that use case.
• Best for build-story enthusiasts → TRUTHEAR x Crinacle Zero. DLP-3D printed cavity, medical-grade high-transparency resin, glue-dropping capping, hand polishing, varnish spray.
My Verdict
"Better" depends on what you want. The TRUTHEAR has two dynamic drivers per side, a hybrid frequency division, a 0.78 2-pin detachable cable and a rated range to 39,500Hz. The Linsoul 7Hz uses one 10mm driver, an OFC cable and a 3.5mm jack, rated to 20,000Hz. More drivers and a wider rated range don't automatically mean you'll prefer the sound — it depends on tuning and your source.
The 7Hz x Crinacle Zero ships with an OFC IEM cable, but the spec sheet doesn't list a detachable connector the way the TRUTHEAR does with its recessed 0.78 2-pin socket. If swapping cables matters to you, the TRUTHEAR is the one with the confirmed standard interface.
The TRUTHEAR x Crinacle Zero is rated at 10 ohm, which is a low impedance figure, so it doesn't demand much voltage — but low-impedance earphones can be pickier about the output they're paired with. The Linsoul 7Hz doesn't list an impedance figure in its specs, so I can't compare the two on that number directly.
Both are marketed as gaming-capable wired in-ears. The TRUTHEAR's dual-driver split and its emphasis on consistent phase across the full range are aimed at keeping the stereo image coherent, which is what you want for positional cues. The Linsoul 7Hz is the simpler option here and, in my opinion, the easier one to just plug into a controller.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: Linsoul INAWAKEN Dawn Ms vs CCA Rhapsody 4-Mode, Rockville DJ1500 vs Linsoul TANGZU Wan'er S.G: Dj Monitor, Linsoul KZ ZS10 vs Tatybo Gaming Headset