During a heavy rainstorm, municipal sewers can become overloaded. When that happens, sewage can flow backwards into homes through the lowest drain, usually the basement floor drain. A backwater valve stops it.
How it works
A backwater valve is installed on the main sewer line inside your home. It has a flap that stays open to let waste flow out. If sewage starts flowing back in, the flap closes and blocks it.
Normally open vs normally closed
Most residential backwater valves are normally open, allowing air and waste to move freely, and only close when backflow occurs.
Installation
The basement floor is cut open near where the sewer line leaves the house. The valve is installed in the line, with an access cover so it can be inspected and cleaned.
Things to know
• While the valve is closed during a backup, avoid using water in the house, as your own waste cannot leave either.
• The valve needs periodic inspection to make sure debris does not stop it closing.
• A permit may be required.
Subsidies
Some municipalities offer subsidies for backwater valve installation. Check with the City of Vaughan for current programs.
Learn more about backwater valve installation.