Trezor®.io Start — Starting® Up Your Device Trezor Setting up a hardware wallet is an important first step for anyone who wants to take greater responsibility for managing cryptocurrency. Unlike a software wallet that operates primarily through a computer or smartphone, a hardware wallet is designed to keep sensitive wallet operations separated from the internet-connected environment. The setup process should therefore be approached carefully, with attention to authenticity, recovery information, and device security. Trezor provides a dedicated setup experience for users beginning with a compatible hardware wallet. The process is designed to help users initialize their device, connect it with the appropriate management software, and prepare it for cryptocurrency transactions. Begin With a Genuine Device Before starting the setup, make sure your Trezor hardware wallet was obtained through a trusted source. Inspect the device and packaging for anything unusual. If you purchased the wallet from an authorized source, follow the recommended setup process rather than relying on instructions from unknown websites or social-media accounts. Never use a device that appears to have been modified or tampered with. Security begins before the device is even connected. Visit the Correct Setup Resource When beginning the setup process, carefully verify that you are using the genuine Trezor website. Phishing websites can imitate cryptocurrency wallet services and may use similar names, logos, or page designs. Never enter sensitive wallet information into a website simply because someone sends you a link. If you receive an unexpected message claiming that your Trezor requires verification or recovery, independently navigate to the trusted source instead of following the provided link. Connect Your Trezor Once you have confirmed that you are using the correct setup process, connect your hardware wallet according to the manufacturer's instructions. The setup interface should guide you through the necessary steps. Pay attention to instructions shown on both your computer and the physical Trezor device. The hardware wallet is an important security component, so users should become comfortable checking information directly on the device. Do not rush through the setup simply to begin trading. Taking a few extra minutes to understand each step can help prevent mistakes later. Initialize Your Wallet During the initial setup, you may be guided through the process of creating a new wallet or restoring an existing one. If you are creating a new wallet, the device may generate recovery information. This information is extremely important because it can potentially be used to restore access to your wallet. Write it down carefully using the recommended method. Keep the recovery information offline and store it in a secure place. Never share it with anyone. Do not enter it into online forms, websites, emails, or messaging applications. A legitimate support representative should never ask you to reveal your recovery phrase. Protect Your Recovery Phrase Your recovery phrase should be treated as the backup key to your wallet. Anyone who obtains it may potentially be able to restore the wallet on another compatible device. For this reason, avoid storing the phrase digitally. Do not save it in cloud storage. Do not take a screenshot. Do not photograph it with your phone. Instead, keep the written backup in a secure location that is protected from unauthorized access, physical damage, and loss. Consider your recovery backup as important as the hardware wallet itself. Create Your Device PIN Depending on your Trezor model and setup process, you may be asked to configure a PIN. Choose a PIN that is difficult for another person to guess. Avoid obvious patterns and easily identifiable numbers. The PIN helps protect access to the physical device, but it should not be confused with the recovery phrase. Both pieces of information have different purposes and should be protected carefully. Install or Access the Management Software After initializing your device, you may need to use the appropriate Trezor management software to manage supported cryptocurrency accounts. Always obtain software from trusted official sources. Avoid downloading wallet applications from third-party websites or links shared through unsolicited messages. Once connected, the software can provide an interface for viewing accounts, checking balances, reviewing transactions, and preparing cryptocurrency transfers. Receive Your First Cryptocurrency Receiving cryptocurrency generally involves providing the correct wallet address to the sender. Before sharing an address, verify that it belongs to the intended account and supports the correct cryptocurrency and network. For larger transfers, carefully confirm the address before proceeding. When supported by the workflow, checking important information directly on the hardware wallet can provide an additional verification step. If you are using a particular blockchain network for the first time, make sure the sender is using the compatible network. Sending Your First Transaction When sending cryptocurrency, review every detail before approving the transaction. Check the destination address. Confirm the amount. Review the network. Examine the transaction fee. Your hardware wallet may display transaction information for confirmation. Compare what appears on the device with what you intended to send. If the information does not match, stop immediately. Blockchain transactions can be irreversible, so careful verification is essential. Stay Alert After Setup Completing the initial setup does not mean security is finished. Keep your software updated through trusted sources. Protect your computer and mobile devices. Avoid suspicious browser extensions. Be cautious of fake support accounts. Never reveal your recovery phrase or private keys. If someone contacts you claiming that your wallet is compromised and asks for sensitive information, treat the request as suspicious. Final Thoughts Starting a new Trezor device is more than simply connecting hardware and installing software. It is the beginning of a personal security routine for managing digital assets. Take time to verify your device and use authentic setup resources. Create a secure PIN. Protect your recovery phrase. Learn how your wallet works before transferring significant funds. Always verify transaction details directly on your hardware device when applicable. With careful preparation and responsible security habits, users can establish a strong foundation for managing cryptocurrency through a Trezor hardware wallet. The most important principle is simple: take control of your digital assets without sacrificing caution, privacy, or security.

Trezor®.io Start — Starting® Up Your Device Trezor

Setting up a hardware wallet is an important first step for anyone who wants to take greater responsibility for managing cryptocurrency. Unlike a software wallet that operates primarily through a computer or smartphone, a hardware wallet is designed to keep sensitive wallet operations separated from the internet-connected environment. The setup process should therefore be approached carefully, with attention to authenticity, recovery information, and device security.

Trezor provides a dedicated setup experience for users beginning with a compatible hardware wallet. The process is designed to help users initialize their device, connect it with the appropriate management software, and prepare it for cryptocurrency transactions.

Begin With a Genuine Device

Before starting the setup, make sure your Trezor hardware wallet was obtained through a trusted source.

Inspect the device and packaging for anything unusual. If you purchased the wallet from an authorized source, follow the recommended setup process rather than relying on instructions from unknown websites or social-media accounts.

Never use a device that appears to have been modified or tampered with.

Security begins before the device is even connected.

Visit the Correct Setup Resource

When beginning the setup process, carefully verify that you are using the genuine Trezor website.

Phishing websites can imitate cryptocurrency wallet services and may use similar names, logos, or page designs.

Never enter sensitive wallet information into a website simply because someone sends you a link.

If you receive an unexpected message claiming that your Trezor requires verification or recovery, independently navigate to the trusted source instead of following the provided link.

Connect Your Trezor

Once you have confirmed that you are using the correct setup process, connect your hardware wallet according to the manufacturer's instructions.

The setup interface should guide you through the necessary steps.

Pay attention to instructions shown on both your computer and the physical Trezor device.

The hardware wallet is an important security component, so users should become comfortable checking information directly on the device.

Do not rush through the setup simply to begin trading.

Taking a few extra minutes to understand each step can help prevent mistakes later.

Initialize Your Wallet

During the initial setup, you may be guided through the process of creating a new wallet or restoring an existing one.

If you are creating a new wallet, the device may generate recovery information.

This information is extremely important because it can potentially be used to restore access to your wallet.

Write it down carefully using the recommended method.

Keep the recovery information offline and store it in a secure place.

Never share it with anyone.

Do not enter it into online forms, websites, emails, or messaging applications.

A legitimate support representative should never ask you to reveal your recovery phrase.

Protect Your Recovery Phrase

Your recovery phrase should be treated as the backup key to your wallet.

Anyone who obtains it may potentially be able to restore the wallet on another compatible device.

For this reason, avoid storing the phrase digitally.

Do not save it in cloud storage.

Do not take a screenshot.

Do not photograph it with your phone.

Instead, keep the written backup in a secure location that is protected from unauthorized access, physical damage, and loss.

Consider your recovery backup as important as the hardware wallet itself.

Create Your Device PIN

Depending on your Trezor model and setup process, you may be asked to configure a PIN.

Choose a PIN that is difficult for another person to guess.

Avoid obvious patterns and easily identifiable numbers.

The PIN helps protect access to the physical device, but it should not be confused with the recovery phrase.

Both pieces of information have different purposes and should be protected carefully.

Install or Access the Management Software

After initializing your device, you may need to use the appropriate Trezor management software to manage supported cryptocurrency accounts.

Always obtain software from trusted official sources.

Avoid downloading wallet applications from third-party websites or links shared through unsolicited messages.

Once connected, the software can provide an interface for viewing accounts, checking balances, reviewing transactions, and preparing cryptocurrency transfers.

Receive Your First Cryptocurrency

Receiving cryptocurrency generally involves providing the correct wallet address to the sender.

Before sharing an address, verify that it belongs to the intended account and supports the correct cryptocurrency and network.

For larger transfers, carefully confirm the address before proceeding.

When supported by the workflow, checking important information directly on the hardware wallet can provide an additional verification step.

If you are using a particular blockchain network for the first time, make sure the sender is using the compatible network.

Sending Your First Transaction

When sending cryptocurrency, review every detail before approving the transaction.

Check the destination address.

Confirm the amount.

Review the network.

Examine the transaction fee.

Your hardware wallet may display transaction information for confirmation.

Compare what appears on the device with what you intended to send.

If the information does not match, stop immediately.

Blockchain transactions can be irreversible, so careful verification is essential.

Stay Alert After Setup

Completing the initial setup does not mean security is finished.

Keep your software updated through trusted sources.

Protect your computer and mobile devices.

Avoid suspicious browser extensions.

Be cautious of fake support accounts.

Never reveal your recovery phrase or private keys.

If someone contacts you claiming that your wallet is compromised and asks for sensitive information, treat the request as suspicious.

Final Thoughts

Starting a new Trezor device is more than simply connecting hardware and installing software. It is the beginning of a personal security routine for managing digital assets.

Take time to verify your device and use authentic setup resources.

Create a secure PIN.

Protect your recovery phrase.

Learn how your wallet works before transferring significant funds.

Always verify transaction details directly on your hardware device when applicable.

With careful preparation and responsible security habits, users can establish a strong foundation for managing cryptocurrency through a Trezor hardware wallet. The most important principle is simple: take control of your digital assets without sacrificing caution, privacy, or security.