Traffic Symbols In Hindi Pdf Download !!INSTALL!!

A school zone sign is five-sided and has a fluorescent yellow/green background with black symbols. It warns that you are coming to a school zone. Slow down, drive with extra caution and watch for children.

These signs mean lanes are only for specific types of vehicles, either all the time or during certain hours. Different symbols are used for the different types of vehicles. They include: buses, taxis, vehicles with three or more people and bicycles.

Traffic Symbols In Hindi Pdf Download

Download File 🔥 https://geags.com/2y2DQe 🔥

These signs warn of unusual temporary conditions such as road work zones, diversions, detours, lane closures or traffic control people on the road. They are usually diamond-shaped with an orange background and black letters or symbols.

EDR signs are used during the unscheduled closure of a provincial highway when OPP detour all traffic off the highway. The EDR markers are located along alternative routes and provide direction to motorists around the closure and back onto the highway.

Traffic Signs or Road Signs are signs erected at the side of roads to provide information to road users. Pictorial signs are used as symbols in place of words. As control devices for traffic, signs need full attention, respect and adequate driver's response. There are three basic types of traffic signs:-

MEANING: Come to a full stop, yield the right-of-way to vehicles and pedestrians in or heading toward the intersection. Go when it is safe. You must come to a stop before the stop line, if there is one. If not, you must stop before you enter the crosswalk. (See "Stop and Crosswalk Lines" under the "Pavement Markings" section of this chapter.) If there is no stop line or crosswalk, you must stop before you enter the intersection, at the point nearest the intersection that gives you a view of traffic on the intersecting roadway.

MEANING: Decrease speed as you reach the intersection. Prepare to stop and yield the right-of-way to vehicles and pedestrians in or heading toward the intersection. You must come to a full stop at a YIELD sign if traffic conditions require it. When you approach a YIELD sign, check carefully for traffic and be prepared to stop.

Some regulation signs have a red circle with a slash over a symbol. This indicates that an action, like a right turn, is not allowed or that some vehicles are restricted from the road. Rectangular white signs with black or red letters or symbols are indications to be alert for special rules.

MEANING: People are at work on or near the roadway and traffic can be controlled by a flag person. A work area speed limit as low as 25 MPH (40 km/h) can be posted. Even if no speed limit is provided, you must drive at a reduced speed through the work zone and you must always obey the flag persons. These illustrations show some signals a flag person will use. Know and obey them.

Traffic lights are normally red, yellow and green from the top to bottom or left to right. At some intersections, there are lone red, yellow or green lights. Some traffic lights are steady, others flash. Some are round, and some are arrows. State law requires that if the traffic lights or controls are out of service or does not operate correctly when you approach an intersection, you must come to a stop as you would for a stop sign. You must then continue according to the rules of right-of-way, unless you are told to continue by a traffic officer.

You can make a right turn at a steady red light after you come to a full stop and yield the right-of-way to oncoming traffic and pedestrians. You can make a left turn at a steady red light when you turn from a one-way road into another one-way road after you come to a full stop and yield the right-of-way to oncoming traffic and pedestrians.

Lines and symbols on the roadway divide lanes and tell you when you can pass other vehicles or change lanes. They also tell you which lanes to use for turns and where you must stop for signs or traffic signals. The arrows on these illustrations show the direction of traffic.

Solid lines along the side of the road tell you where its edge is - where the travel lane ends and the shoulder begins. It is illegal to drive across the edge line, except when told to by a police officer or other authorized official or when allowed by an official sign. An edge line that angles toward the center of the road shows that the road is narrower ahead. Lines that separate lanes of traffic that moves in the same direction are white.

Lines that separate traffic that moves in opposite directions are yellow. There may be two lines between lanes and lines can be solid or broken. Read Chapter 6 for the rules on how to pass other vehicles.

Solid line with broken line: If you are on the side with the solid line, you cannot pass other vehicles or go across the line except to make a left turn into a driveway. If you are on the side with the broken line, you can pass if it is safe to and you will not interfere with traffic.

Stop and Crosswalk Lines: At an intersection controlled by a STOP sign, YIELD sign or traffic light, there can be a white stop line painted across the lane (called a Stop Line), and/or two parallel lines painted across the road (called a Crosswalk). When required to stop because of a sign or light, you must stop before you reach the stop line, if there is one, or the crosswalk. You need only stop at a stop line or crosswalk if required to by a light, sign or traffic officer, or to yield to a pedestrian, in-line skater or scooter at a marked or unmarked crosswalk. A single stop line may be placed at intersections to allow room for larger vehicles (such as tractor-trailers, buses and trucks) to turn without forcing other traffic to back up. It's important that you stop before you reach this stop line. (See "Pedestrians" in Chapter 11).

Directions given by traffic officers take precedence over signs, signals or pavement markings. If a traffic officer signals you to stop at a green light, for example, you must stop. If an officer signals you to drive through a red light or stop sign, you must do it.

Regulatory signs are rectangular with black words or symbols on a white background and tell you what to do. They are posted at or near where the requirement applies. Not all regulatory signs are shown here.

Traffic signals control the right of way and provide for a smooth, orderly flow of traffic. If a signal appears dark, such as during a power failure, you should stop as if there are stop signs in all directions. When a traffic signal is out of order and flashes yellow or red, you must obey that signal.

A flashing yellow arrow means that you may make the movement indicated by the arrow, but first you must yield to pedestrians and oncoming traffic. Oncoming traffic has a steady green signal.

Traffic signs, installations, and symbols used in Germany are prescribed by the Road Traffic Regulation (StVO) (German: Straenverkehrs-Ordnung) and the Traffic Signs Catalog (VzKat) (German: Verkehrszeichenkatalog).[1][2]

39 to 43 of the StVO regulate the effect of traffic signs and installations. Annexes 1 to 3 illustrate most danger, regulatory, and directional signs and annex 4 illustrates the traffic installations. Other traffic signs and installations not specified in the StVO, primarily specific supplementary signs, are published in the VzKat.[1]

The Operations and Maintenance Division performs maintenance on all traffic signs, pavement markings, and lane line striping throughout the City. All of these are commonly referred to as non-electrical traffic control devices. Examples of these devices are listed below:

Please refer to the Engineering Services Division and the Traffic Engineering section for information on requesting new traffic signs or pavement markings. Or, feel free to call our maintenance hot line and our customer service staff will transfer your call to the Traffic Engineering section.

If an intersection needs a signal, these disadvantages are offset by the benefits. If however, engineers determine a traffic signal is unnecessary but is nevertheless installed, the following adverse effects may happen:

Traffic control devices such as signs and markings are the primary means of regulating, warning and guiding traffic on all streets and highways. The need for well designed, adequately maintained devices grows in proportion to the density of traffic, speed of operation, and complexity of maneuvering areas on highways and at intersections.

Signs and markings regulate, warn, guide and channel traffic. To be effective, each device should fulfill a need, command attention, convey a clear, simple meaning, command respect of road users and give adequate time to respond.

This study investigated the role of age, marital status, gender, nationality, educational background and monthly income in drivers' comprehension of traffic signs. The populations sampled here were from five Arabian Gulf Countries. A total of 28 symbolic warning and regulatory signs were investigated. A questionnaire specially prepared to collect the necessary data was distributed to over 9000 drivers in the five countries; 4774 responded (53%). The results indicated substantial problems with the level of comprehension among the drivers about the traffic signs. The percentages of drivers who correctly identified the regulatory signs and warning signs were around 55 and 56%, respectively. Age, gender, education and income played major roles in determining drivers' comprehension of signs, whereas marital status showed no significant effect. Drivers who are young, female, those with lower levels of education or lower incomes understand the signs significantly worse than drivers who are older, male, with higher levels of education or higher incomes. Drivers from Europe and USA are significantly better than Asian and Arab drivers. These findings are believed to be important for the designers of road signs for international applications. ff782bc1db