TP-link Router App Setup Guide

In this article, we guide you how can you setup your Tp-link router easily. 

This set guide make your installation easier. 

1. First, download TP-link Router App from the play store for Android users or use App Store for Apple device users.

2. Unpack the router box and find these in your product packaging. Install antennas if provided and check for the router, power adapter and Ethernet cable.

3. Unplug your modem, remove and reinsert the backup battery if it uses one, and plug the modem back in. 

4. Use an Ethernet cable to connect your modem to the yellow Internet port on the router.

5.  Connect your router to a power source. Power light on the router turn lights green. If the Power LED does not light, press the Power On/Off button.

6. Wait about 2 minutes for the router to start up.

7. Wait about 1 minute until all the WiFi LEDs are solid on.

8. When WiFi router lights turn on, get the WiFi info find SSID Find SSID and Password on the product label at the back of the router and then connect your mobile device to the router's network

9. Come back to your TP-link Router App.

10. And you can check your network setting and easily access here.

Disclaimer

The information provided by tp-link router app setup guide. (“we,” “us” or “our”) on this mobile application is for general informational purposes only. All information is provided in good faith, however we make no availability or completeness of any information.