How We Research
We compare products from their published specs and features; the verdicts below are our independent editorial opinions.
If you want a drop-in refresh for Beats Solo 2.0/3.0 Wireless with a fast, tool-free install and a confident grip, choose Toeasor Solo 2.0/3.0; if you need replacement cushions for the Audio-Technica ATH SR50BT with a longer comfort-focused build and a stated one-year manufacturer-defect warranty, choose HTINDUSTRY ATH SR50BT.
• Toeasor Solo 2.0/3.0 — biggest strength: Purpose-built for Beats Solo 2.0/3.0 Wireless with a painless, seconds-long swap and 3M adhesive backing that keeps the pads locked on.
• Toeasor Solo 2.0/3.0 — biggest trade-off: It only fits Solo 2.0/3.0 Wireless — it explicitly does not fit Solo 2.0 Wired, so you have to check your exact model first.
• HTINDUSTRY ATH SR50BT — biggest strength: Protein leather over memory foam aimed at long listening sessions, with reduced ear pressure and strong noise isolation, plus a one-year manufacturer-defect warranty.
• HTINDUSTRY ATH SR50BT — biggest trade-off: It is locked to one headphone — the Audio-Technica ATH SR50BT — so it is useless if you own anything else.
• Who each pick is for: Toeasor for Beats Solo 2.0/3.0 Wireless owners who want a quick, secure refresh; HTINDUSTRY for ATH SR50BT owners who prioritize plush comfort and a stated warranty.
This is a replacement ear pad kit, not a headphone. You get two black pads in the box (headphones not included), and the whole point is that they restore a pair of Beats Solo 2.0 or Solo 3.0 Wireless cans that have flattened, cracked or peeled. The pad itself is soft protein leather wrapped over memory foam, and the design brief is simple: feel close to the original while isolating more of your environment. That combination matters most on a headphone like the Solo, which sits on the ear rather than around it — an on-ear pad lives or dies by how it presses against you.
The install is where Toeasor earns its keep. There are no tools and no wrestling match: peel the old pads off, press the new ones on, done. The 3M adhesive on the back is the detail I like most here. On-ear pads take a beating — they get pulled, stuffed in bags, yanked off one-handed — and an adhesive-backed pad is far less likely to migrate or peel away at the edge than a loose friction fit.
HTINDUSTRY ATH SR50BT: Who It's For
HTINDUSTRY takes the opposite approach: one headphone, done thoroughly. These cushions are made for the Audio-Technica ATH SR50BT Bluetooth wireless over-ear model and nothing else. The recipe is protein leather and memory foam, and the stated goals are comfort, a soft touch over extended listening sessions, reduced pressure on the ears and solid noise isolation. If you use the SR50BT for long stretches — workdays, gaming sessions, flights, long commutes — that pressure relief is the number worth caring about. Over-ear pads that clamp too hard are the single most common reason people stop wearing a headphone for hours at a time.
The other thing that stands out is the warranty: one year against manufacturer defects. For a consumable part whose whole failure mode is wearing out, foam collapsing or stitching letting go, that is a meaningful commitment. It signals the maker expects the pad to hold up, not just survive the unboxing.
Buy these if your ATH SR50BT pads have gone flat or flaky and you want a comfort-first replacement with a bit of backup behind it. Installation is straightforward — no special tools, just fit them onto the headphone. Skip them if you own a different Audio-Technica model or a different brand entirely; compatibility here is a single model, not a family.
• Best for Beats Solo 2.0/3.0 Wireless owners → Toeasor Solo 2.0/3.0. It is the only one of the two built for that headphone.
• Best for Audio-Technica ATH SR50BT owners → HTINDUSTRY ATH SR50BT. Same logic in reverse.
• Best for the fastest, most foolproof install → Toeasor Solo 2.0/3.0. 3M adhesive backing plus a peel-and-press swap within seconds.
• Best for long-session comfort and pressure relief → HTINDUSTRY ATH SR50BT. Protein leather over memory foam, explicitly aimed at extended listening.
• Best for noise isolation as a stated priority → HTINDUSTRY ATH SR50BT. Reduced pressure and strong isolation are called out directly; Toeasor emphasizes isolation as a byproduct of the memory foam seal.
• Best for peace of mind on a wear item → HTINDUSTRY ATH SR50BT. One-year warranty against manufacturer defects.
• Best if you want to restore the original feel as closely as possible → Toeasor Solo 2.0/3.0. Soft protein leather designed to wear like the stock pads.
• Best if you are not sure what you own → neither, yet. Confirm your exact model first: Solo 2.0 Wired is excluded from Toeasor, and HTINDUSTRY fits only the SR50BT.
My Verdict
can you sleep with over ear headphones
You can physically lie down with them on, but it is not what either of these pads is designed for. The Toeasor pads are on-ear replacements for Beats Solo 2.0/3.0 Wireless, and the HTINDUSTRY pads are over-ear cushions for the ATH SR50BT. Both use memory foam and protein leather to improve comfort during listening sessions — not as sleep gear. If you do lie down in them, expect the headband and the pad pressure to be the limiting factor, not the foam.
how to wear over ear headphones
Put them on so each earcup sits over the corresponding ear, with the headband arcing over the top of your head and the L/R markings matched to your left and right. For the HTINDUSTRY ATH SR50BT pads, the cushion should surround your ear rather than press on it — that is what lets the memory foam reduce pressure and isolate noise. For the Toeasor pads on a Beats Solo 2.0/3.0 Wireless, the pad rests against the ear by design.
how to wear over ear headphones properly
Proper fit means the headband rests on the crown of your head, not your forehead or the back of your skull, and both pads sit at equal height so the clamping force is even. Adjust the sliders a notch at a time until the seal feels snug but not pinching. With the HTINDUSTRY cushions, the goal is a full seal around the ear so the memory foam can do its isolation work; with the Toeasor pads, you want the adhesive-backed pad sitting flat and centered on the cup.
how should over ear headphones fit
They should feel secure enough to stay put when you tilt your head, without pressing hard enough to ache after an hour. The HTINDUSTRY pads are built to reduce pressure for extended sessions, so if you feel constant squeeze, the fit is too tight — widen the headband. On the Toeasor pads, check that the edges are fully seated against the cup; a lifted edge breaks the seal and costs you both bass and isolation. Either way, a good fit is one you forget about.
As an Amazon Associate I earn from qualifying purchases.
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon and affiliated sites.
When you buy through links on this page, we may earn a commission from qualifying purchases at no extra cost to you.
Amazon and the Amazon logo are trademarks of Amazon or its affiliates. This site is an independent third-party review and is not affiliated with, endorsed by, or sponsored by Amazon or the product brands mentioned.
See also: YOOZER Go ANC vs QXUFV Earbuds: Transparent Mode Headphones, Retevis Walkie Talkie Headset vs Skullcandy Ink'd, TOZO T10 vs TOKANI Earbuds: True Wireless Stereo Earbuds, JVC HAFX5A vs EarFun S1