109. Kim, T., Na, U., Lee, G., & Jo, H. (2026). High-resolution spatiotemporal measurement of local heat transfer coefficient in a microchannel under boiling-induced oscillations. International Journal of Heat and Mass Transfer, 271, 129291.
108. Chung, S., & Jo, H. (2026). Approximate model of thermoeconomic optimization for printed-circuit heat exchangers in sodium–nitrogen dispatchable nuclear power systems. International Journal of Energy Research, 2026(1), 5565504. https://doi.org/10.1155/er/5565504
107. Choi, N., & Jo, H. (2026). Parametric study on the effect of power-to-volume ratio on long-term core cooling during small-break loss-of-coolant accidents in compact integral pressurized water reactors. [Pre-proof manuscript; journal information not provided].
106. Serrao, B. P., Na, U., Jo, H., & Duarte, J. P. (2026). Model-free solution estimation of critical heat flux using genetic programming. Nuclear Technology, 1–19.
105. Lee, Y., Lim, S., Na, U., Lee, G., Hwang, D., Kwon, S., & Jo, H. (2026). Experimental investigation of multi-swirl inserts for enhancing high-heat-flux subcooled flow boiling under one-sided heating conditions. Energies, 19(15), 3591. https://doi.org/10.3390/en19153591
104. Chung, S., Choi, J. H., & Jo, H. (2026). Control evaluation of a nitrogen cycle for a decoupled sodium-dispatchable system. Applied Thermal Engineering, 306, 133088. https://doi.org/10.1016/j.applthermaleng.2026.133088
103. Kim, T., Na, U., Lee, G., & Jo, H. (2026). High-resolution spatiotemporal measurement of local heat transfer coefficient in a microchannel under boiling-induced oscillations. International Journal of Heat and Mass Transfer, 271, 129291. https://doi.org/10.1016/j.ijheatmasstransfer.2026.129291
102. Na, U., Serrao, B. P., Seo, J. Y., Fitrony, M. A., Suh, Y., Kwon, S., Duarte, J. P., Won, Y., & Jo, H. (2026). Extracting bubble information from high-pressure nucleate boiling using a deep learning approach. Nuclear Engineering and Technology, 58(9), 104400. https://doi.org/10.1016/j.net.2026.104400
101. Kang, T. H., Park, S. Y., Hyer, H., Yang, D. H., Sohn, Y., Jo, H., Kim, N., & Lee, K. A. (2026). Topology-driven compressive behavior of Inconel 718 lattice structures with Z-strut reinforcement fabricated by laser powder bed fusion. Journal of Materials Research and Technology, 42, 6182–6190.
100. Choi, Y., Han, T., Kwon, S., & Jo, H. (2026). Enhancing condensation heat transfer via engineered water film channel configuration. International Journal of Heat and Mass Transfer, 261, 128513. https://doi.org/10.1016/j.ijheatmasstransfer.2026.128513
99. Eldem, C., Hwang, D., Choi, N., & Jo, H. (2026). Development of a one-dimensional system code for evaluating CRUD morphology effects on safety margins during LBLOCA. Nuclear Engineering and Design, 453, 114912.
98. Cha, M., Lee, Y., & Jo, H. (2026). Experimental study on filmwise condensation of convective steam on helical tubes with film visualization. Applied Thermal Engineering, 290, 129974.
97. Na, U., Serrao, B. P., Seo, J. Y., Suh, Y., Duarte, J. P., Won, Y., & Jo, H. (2026). Bubble segmentation and heat flux estimation in nucleate boiling using a resource-efficient deep learning framework. Energy and AI, 23, 100668. https://doi.org/10.1016/j.egyai.2025.100668
96. Oh, J. H., & Jo, H. (2025). Blast furnace waste heat recovery: Case study and optimization of finned-tube heat exchanger incorporating fouling model. Case Studies in Thermal Engineering, 76, 107426.
95. Kim, D., Han, T., Seo, J., & Jo, H. (2025). Effective water management through microporous-layer wettability control for high power density in low-temperature fuel cells. Journal of Power Sources, 660, 238524.
94. Yoo, J. S., Choi, J. H., Park, J. Y., Song, J. Y., Chang, J. Y., Kang, D.-W., Kwon, S. U., Jo, H. J., & Kim, B. J. (2025). Proximal and distal middle cerebral artery diameter ratio and lenticulostriate artery infarction. PLOS ONE, 20(8), e0329677. https://doi.org/10.1371/journal.pone.0329677
93. Hwang, D., Choi, N., & Jo, H. (2025). Modeling of thin liquid film drainage governing the lifetime of a single mini-scale surface bubble. Physics of Fluids, 37(8).
92. Woo, H., & Jo, H. (2025). Geometry and wall shear stress of the contralesional middle cerebral artery are associated with the burden of cerebral small vessel disease in acute ischemic stroke. Journal of Clinical Neurology, 21, 294–304.
91. Oh, H., & Jo, H. (2025). Effect of wetting methods of the pseudopotential lattice Boltzmann model on boiling phenomena. Applied Thermal Engineering, 269, 126037.
90. Lee, S. W., Kim, D. E., Seo, J. Y., & Jo, H. (2025). Economic evaluations of hydrogen production and storage systems coupled with high-temperature gas-cooled reactors. International Journal of Hydrogen Energy, 124, 191–203. https://doi.org/10.1016/j.ijhydene.2025.04.046
89. Chung, S. S., Kim, N., & Jo, H. (2025). Effect of flow distribution on heat transfer in printed circuit heat exchangers using conjugate heat transfer model with a modified porous media approach. Applied Thermal Engineering, 266, 125540.
88. Choi, J., Cha, M., Shin, S., Kim, J., Kim, H. G., Kim, B., & Jo, H. (2025). Maximum admittance method for cerebrovascular outlet boundary conditions and importance of stenosis severity as a dominant factor on hemodynamics. Scientific Reports, 15, 11395.
87. Lee, J., Kim, N., Yoon, J., Im, G., Eoh, J., Jo, H., & Kim, H. (2025). Design evaluation of serpentine-tube integrated steam generator for sodium-cooled fast reactor. Annals of Nuclear Energy, 213, 111133.
86. Lee, S., Lee, Y., Lee, Y., & Jo, H. (2025). Condensation heat transfer and applicability assessment of a printed circuit heat exchanger as a condenser in a cryogenic CO2 capture and storage system. Applied Thermal Engineering, 261, 125133. https://doi.org/10.1016/j.applthermaleng.2024.125133
85. Na, U., Lee, S., Park, S., Choi, M., & Jo, H. (2025). Thermal field predictions and boiling curve reconstruction from bubble dynamics using conditional generative adversarial networks. Applied Thermal Engineering, 261, 125100. https://doi.org/10.1016/j.applthermaleng.2024.125100
84. Na, U., Seo, J. Y., Kim, T., Jeon, B. G., & Jo, H. J. (2025). Decrypting the temperature field in flow boiling with latent diffusion models [Preprint]. arXiv. https://arxiv.org/abs/2501.16510
83. Lee, S., Choi, J., Lee, S., & Jo, H. (2025). Theoretical modeling of liquid film and force effects in a printed circuit heat exchanger. Applied Thermal Engineering, 266, 125630.
82. Oh, H., & Jo, H. (2025). Numerical study of turbulent flow boiling heat transfer in structured cooling channels using lattice Boltzmann method with advanced outlet boundary conditions. Physics of Fluids, 37, 013349.
81. Lee, S., Na, U., & Jo, H. (2025). Development of integrated CHF model for heater geometries and surface characteristics and further CHF enhancement with controlled heating timescale. Applied Thermal Engineering, 258, 124642.
80. Shin, S., Lee, S., Chung, S., Kim, N., Kim, M., & Jo, H. (2024). Mitigation of fouling with swirling flow induced in 3D double-sided straight channel for printed circuit heat exchanger. International Journal of Heat and Mass Transfer, 233, 125982. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125982
79. Choi, Y., Han, T., & Jo, H. (2024). Long-lasting enhanced condensation with highly drainable water film channels. International Journal of Heat and Mass Transfer, 232, 125908. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125908
78. Kim, T., Lee, Y., Hwang, D., Jung, W., Choi, N., Chung, S., Kim, J., Park, J., Son, H., Song, K., Kim, H., & Jo, H. (2024). High fidelity core flow measurement experiment for an advanced research reactor using a real scale mockup. Nuclear Engineering and Technology, 56(9), 3700–3716. https://doi.org/10.1016/j.net.2024.04.019
77. Oh, H., & Jo, H. (2024). Turbulent flow boiling simulation based on pseudopotential lattice Boltzmann method with developed wall boundary treatments and unit conversion. Applied Thermal Engineering, 248, 123148. https://doi.org/10.1016/j.applthermaleng.2024.123148
76. Kim, E., Chun, C., Kim, M. H., & Jo, H. (2024). Effect of thermal properties and thickness for various metals on the Leidenfrost temperature. International Journal of Thermal Sciences, 196, 108697.
75. Hwang, D., Kang, S. H., Choi, N., & Jo, H. (2024). Development of a one-dimensional system code for the analysis of downward air-water two-phase flow in large vertical pipes. Nuclear Engineering and Technology, 56(1), 19–33.
74. Na, U., Choi, M., & Jo, H. (2023). Critical heat flux diagnosis using conditional generative adversarial networks [Preprint]. arXiv. https://arxiv.org/abs/2305.02622
73. Lee, S. W., Lee, Y., Kim, N., & Jo, H. (2023). Design of heat pipe cooled microreactor based on cycle analysis and evaluation of applicability for remote regions. Energy Conversion and Management, 288, 117126.
72. Choi, J. H., Yoon, J., Chung, S., Kim, N., & Jo, H. (2023). Off-design performance evaluation of multistage axial gas turbines for a closed Brayton cycle of sodium-cooled fast reactor. Nuclear Engineering and Technology, 55(7), 2697–2711.
71. Lim, J. H., Oh, H., Lee, S. W., Park, M., Lee, S., & Jo, H. (2023). A novel integrated PDB-FDB model for the prediction of flow boiling heat transfer under high sub-cooling and very high heat flux conditions. International Journal of Heat and Mass Transfer, 208, 124051.
70. Kim, E., Ko, D., Jung, T. S., Chun, C., & Jo, H. (2023). Impact of oxidized HANA™ and Zircaloy-4 cladding materials under high temperature on the coolability of light water reactors. Journal of Nuclear Materials, 584, 154567. https://doi.org/10.1016/j.jnucmat.2023.154567
69. Lee, S., Na, U. J., & Jo, H. (2023). Techno-economic assessment of green hydrogen production via two-step thermochemical water splitting using microwave. International Journal of Hydrogen Energy, 48(29), 10706–10723.
68. Kim, N., Yoon, J., Eoh, J., Kim, M. H., Jo, H., & Kim, H. (2023). Design and thermal-hydraulic evaluation of integrated steam generator with serpentine-tube configuration for prevention of sodium-water reaction. International Journal of Energy Research, 2023.
67. Hwang, D., Choi, N., Jung, W., Kim, T., Lee, Y., & Jo, H. (2023). Plant-scale experiments of an air inflow accident under sub-atmospheric pressure by pipe break in an open-pool type research reactor. Nuclear Engineering and Technology.
66. Chung, S., Lee, S. W., Kim, N., Shin, S. M., Kim, M. H., & Jo, H. (2023). Experimental study of printed-circuit heat exchangers with airfoil and straight channels for optimized recuperators in nitrogen Brayton cycle. Applied Thermal Engineering, 218, 119348.
65. Lee, S., Na, U. J., & Jo, H. (2022). Techno-economic assessment of green hydrogen production via two-step thermochemical water splitting using microwave. International Journal of Hydrogen Energy.
64. Lee, Y., Cha, M., Kim, H., & Jo, H. (2022). Film condensation heat transfer of high-pressure and low-mass-flux steam in inclined tube. International Journal of Heat and Mass Transfer, 189, 122714.
63. Lee, S., Kim, T. K., Park, C. M., Kim, M. H., & Jo, H. (2022). The effect of heater dimensions with different liquid penetration lengths to dry spots on critical heat flux. Applied Thermal Engineering, 213, 118754. https://doi.org/10.1016/j.applthermaleng.2022.118754
62. Wang, J., Corradini, M. L., & Jo, H. (2022). Accident tolerant fuels (ATF) coating and cladding thermal hydraulic properties evaluation by MELCOR yu 1.8. 6: Benchmark for SURRY short term station black out. Nuclear Science and Engineering.
61. Kim, M., Noh, H., Lee, G. C., Yeom, H., Kim, T. K., Kim, J. M., Kim, T. H., Jo, H., Park, H. S., Sridharan, K., & Kim, M. H. (2022). Flow boiling critical heat flux enhancement in ZrSi2 accident-tolerant fuel cladding with porous structures. Applied Thermal Engineering, 207, 118164.
60. Lee, S. W., Shin, S. M., Chung, S., & Jo, H. (2022). Evaluation of thermal-hydraulic performance and economics of printed circuit heat exchanger (PCHE) for recuperators of sodium-cooled fast reactors (SFRs) using CO2 and N2 as working fluids. Nuclear Engineering and Technology, 54(5), 1874–1889.
59. Duarte, J. P., Jo, H., & Corradini, M. L. (2022). Pre- and post-CHF study at the high pressure heat transfer facility. Nuclear Science and Engineering.
58. Wang, J., Corradini, M. L., & Jo, H. (2022). Sensitivity analysis of water pool depth and mixing time for ex-vessel fuel-coolant interaction (FCI) steam explosion simulation. Nuclear Science and Engineering.
57. Hwang, D., Park, M., Oh, H., Lim, J. H., Kim, M. H., Chai, K. B., & Jo, H. (2022). Development of a high heat flux electric joule heating system for testing a one-side heated cooling channel. Fusion Science and Technology, 78(3), 220–242.
56. Kang, J. W., Han, T., Moriyama, K., Park, H. S., & Jo, H. (2022). Internal condensation heat transfer in a hydrophobic near-horizontal tube with high pressure and low mass flux. International Journal of Heat and Mass Transfer, 182.
55. Kim, T. K., Ferreira, J., Jo, H., & Kaviany, M. (2021). Flow-boiling canopy wick capillary-viscous limit. International Journal of Heat and Mass Transfer, 181.
54. Lim, J. H., Lee, S. W., Oh, H., Park, M., Hwang, D., Kim, M. H., & Jo, H. (2021). Heat-transfer characteristics of screw tube in one-side high heat load condition for fusion reactor divertor application. International Journal of Advanced Nuclear Reactor Design and Technology, 3.
53. Lim, J. H., Lee, S. W., Oh, H., Hwang, D., Park, M., Kim, M. H., & Jo, H. (2021). Development of a novel two-phase pressure drop multiplier correlation of screw tube for fusion reactor safety. IEEE Transactions on Plasma Science.
52. Kim, N., Kim, H., Eoh, J., Kim, M. H., & Jo, H. (2021). Thermal-hydraulic design of natural circulation integrated steam generator using design map. Applied Thermal Engineering, 197, 117389.
51. Lim, J. H., Lee, S. W., Park, M., Oh, H., Hwang, D., Kim, M. H., & Jo, H. (2021). New correlation to predict the onset of flow instability (OFI) heat flux of one-side heated hypervapotron channel for fusion reactor application. Physica Scripta.
50. Lim, J. H., Lee, S. W., Hwang, D., Oh, H., Park, M., Kim, M. H., & Jo, H. (2021). Two-phase pressure drop analysis of swirl tube in one-side high heat load condition for plasma facing component application. Physica Scripta, 96(12), 125606.
49. Choi, J. H., Yoon, J., Eoh, J., Kim, M. H., & Jo, H. (2021). Performance and size comparison of two-stage and three-stage axial turbines for a nitrogen gas Brayton cycle coupled with a sodium-cooled fast reactor. Nuclear Engineering and Design, 380, 111309.
48. Lee, S. W., Kwon, J. G., Kim, M. H., & Jo, H. (2021). Cycle analysis and economic evaluation for seawater-LNG organic Rankine cycles. Energy, 121259.
47. Park, J. H., Kwon, J. G., Kim, M. H., Cha, J. E., & Jo, H. J. (2021). Experimental investigation of buoyancy effects on local heat transfer of supercritical pressure CO2 in horizontal semicircular tube. International Journal of Heat and Mass Transfer, 164, 120496.
46. Oh, H. G., Lim, J. H., Park, M. G., Kim, M. H., & Jo, H. J. (2020). Design and assessment of a new divertor plasma facing component containing the hypervapotron cooling channel and monoblock-type armor. Fusion Engineering and Design, 162, 112101.
45. Jung, W. H., Park, H. S., Oh, J. H., Hwang, B. C., Lee, M. E., & Kim, M. H. (2020). Minimum diameter limit of particle size distribution and its effect on coolability of debris bed. Nuclear Engineering and Design, 363, 110606.
44. Lim, J. H., Park, M. G., Oh, H. G., Hwang, D. G., Lee, G. C., Kim, M. H., & Jo, H. J. (2020). Experimental study of hypervapotron channel with square fin structure for divertor cooling by one-side, electric joule heating system. Fusion Engineering and Design, 161, 112072.
43. Choi, M., Chu, I. C., Kim, S., Jeon, B. G., & Jo, H. J. (2020). Direct observation of rewetting failure mechanism at CHF under different subcooled flows. International Journal of Heat and Mass Transfer, 163, 120465.
42. Kim, N., Kim, H., Eoh, J., Kim, M. H., & Jo, H. J. (2020). One-dimensional design approach to integrated steam generator with helical-coil tube bundles for a sodium-cooled fast reactor. Nuclear Engineering and Design, 361, 110554.
41. Park, J. H., Kwon, J. G., Kim, T. H., Kim, M. H., Cha, J. E., & Jo, H. J. (2020). Experimental study of a straight channel printed circuit heat exchanger on supercritical CO2 near the critical point with water cooling. International Journal of Heat and Mass Transfer, 150, 119364.
40. Lee, G. C., Kim, S. H., Kang, J., Kim, M. H., & Jo, H. J. (2019). Leidenfrost temperature on porous wick surfaces: Decoupling the effects of the capillary wicking and thermal properties. International Journal of Heat and Mass Transfer, 145, 118809.
39. Lee, G. C., Kim, T. K., Kang, J., Jo, H. J., & Kim, M. H. (2019). Development of anodization technique on zirconium silicide material for reproducing micro/nanosurface structure: Application to nuclear accident tolerant fuel cladding. Surface and Coatings Technology, 374, 171.
38. Jo, H. J., Yeom, H., Gutierrez, E., Sridharan, K., & Corradini, M. L. (2019). Evaluation of critical heat flux of ATF candidate coating materials in pool boiling. Nuclear Engineering and Design, 354, 1.
37. Lee, G. C., Noh, H., Yeom, H., Jo, H. J., Kim, T. K., Kim, M., Sridharan, K., & Park, H. J. (2019). Zirconium-silicide coating on Zircaloy-4 substrate for accident tolerance: Effects on oxidation resistance and boiling. Annals of Nuclear Energy, 126, 350.
36. Kang, J., Kim, T. K., Lee, G. C., Jo, H. J., Kim, M. H., & Park, H. J. (2019). Impact of system parameters on quenching heat transfer in the candidate materials for accident tolerant fuel-cladding in LWRs. Annals of Nuclear Energy, 129, 375.
35. Jo, H. J., Wang, J., & Corradini, M. L. (2019). Stratified steam explosion energetics. Nuclear Engineering and Technology, 51, 95.
34. Jo, H. J., Yeom, H., Yoon, D. S., Duarte, J. P., & Corradini, M. L. (2018). Minimum heat flux (MHF) behavior with different surface characteristics including structured surfaces and different surface energies. International Journal of Heat and Mass Transfer, 127, 414.
33. Duarte, J. P., Zhao, D., Jo, H. J., & Corradini, M. L. (2018). Critical heat flux experiments and a post-CHF heat transfer analysis using 2D inverse heat transfer. Nuclear Engineering and Design, 337, 17.
32. King, J. L., Jo, H. J., Shahsafi, A., Blomstrand, K., Sridharan, K., & Kats, M. A. (2018). Impact of corrosion on the emissivity of advanced reactor structural alloys. Journal of Nuclear Materials, 508, 465.
31. Noh, H., Kim, J. M., Jo, H. J., Park, H. S., Hwang, D. K., & Kim, M. H. (2018). Effect of surface structure and coating on the heat transfer deflection behavior in the early stage of nucleate boiling. International Journal of Heat and Mass Transfer, 126, 1315.
30. Wang, J., Jo, H. J., & Corradini, M. (2018). Potential recovery actions from a severe accident in a PWR: MELCOR analysis of a station blackout scenario. Nuclear Technology.
29. Yoon, D. S., Jo, H. J., & Corradini, M. (2018). CFD modeling of filmwise steam condensation with noncondensable gas with modified boundary condition. International Journal of Heat and Mass Transfer, 125, 485.
28. Yeom, H., Jo, H. J., Johnson, G., Sridharan, K., & Corradini, M. (2018). Transient pool boiling heat transfer of oxidized and roughened Zircaloy-4 surfaces during water quenching. International Journal of Heat and Mass Transfer, 120, 435.
27. Jo, H. J., King, J. L., Blomstrand, K., & Sridharan, K. (2017). Spectral emissivity of oxidized and roughened metal surfaces. International Journal of Heat and Mass Transfer, 115, 1065.
26. King, J. L., Jo, H. J., Tirawat, R., Blomstrand, K., & Sridharan, K. (2017). Effects of surface roughness, oxidation, and temperature on emissivity for reactor pressure vessel alloys. Nuclear Technology, 200, 1.
25. King, J. L., Jo, H. J., Loyalka, S. K., Tompson, R. V., & Sridharan, K. (2017). Computation of total hemispherical emissivity from directional spectral models. International Journal of Heat and Mass Transfer, 109, 894.
24. Yoon, D. S., Jo, H. J., & Corradini, M. L. (2017). Assessment of MELCOR condensation models with the presence of non-condensable gas in natural convection flow regime. Nuclear Engineering and Design, 317, 110.
23. Yoon, D. S., Jo, H. J., Fu, W., Mullin, M. M., & Corradini, M. L. (2017). MELCOR analysis of OSU multi-application small light water reactor (MASLWR) experiment on containment condensation. Nuclear Technology, 198, 277.
22. Jo, H. J., Park, H. S., & Kim, M. H. (2016). Single bubble dynamics on hydrophobic-hydrophilic mixed surfaces. International Journal of Heat and Mass Transfer, 93, 554.
21. Hwang, K. W., Kim, D. H., Jo, H. J., Park, H. S., Moriyama, K., & Kim, M. H. (2016). Effects of heat flux on dropwise condensation on a superhydrophobic surface. Journal of Mechanical Science and Technology, 30, 2141.
20. Kang, J., Kim, S. H., Jo, H. J., Park, G., Ahn, H. S., Moriyama, K., Kim, M. H., & Park, H. S. (2016). Film boiling heat transfer on a completely wettable surface with atmospheric saturated distilled water quenching. International Journal of Heat and Mass Transfer, 93, 67.
19. Jo, H. J., Hwang, K. W., Kim, D. H., Kiyofumi, M., Park, H. S., Kim, M. H., & Ahn, H. S. (2015). Loss of superhydrophobicity of hydrophobic micro/nano structures during condensation. Scientific Reports, 5, 9901.
18. Jo, H. J., Yu, D. I., Noh, H., Park, H. S., & Kim, M. H. (2015). Boiling on spatially controlled heterogeneous surfaces: Wettability patterns on microstructures. Applied Physics Letters, 106, 181602.
17. Jo, H. J., Kim, J. M., Yeom, H., Lee, G. C., Park, H. S., Kiyofumi, M., Kim, M. H., Sridharan, K., & Corradini, M. (2015). Boiling performance and material robustness of modified surfaces with multi scale structures for fuel cladding development. Nuclear Engineering and Design, 291, 204–211.
16. Jo, H. J., Noh, H., Kaviany, M., Kim, J. M., Kim, M. H., & Ahn, H. S. (2015). Tunable, self-assembled 3D reduced graphene oxide structures fabricated via boiling. Carbon, 81, 357–366.
15. Jo, H. J., Kaviany, M., Kim, S. H., & Kim, M. H. (2014). Heterogeneous bubble nucleation on ideally-smooth horizontal heated surface. International Journal of Heat and Mass Transfer, 71, 149–157.
14. Jo, H. J., Kim, S. H., Park, H. S., & Kim, M. H. (2014). Critical heat flux and nucleate boiling on several heterogeneous wetting surfaces: Controlled hydrophobic patterns on a hydrophilic substrate. International Journal of Multiphase Flow, 62, 101–109.
13. Ahn, H. S., Kim, J. M., Kim, J. M., Park, S. C., Hwang, K., Jo, H. J., Kim, T. J., Jerng, D. W., Kaviany, M., & Kim, M. H. (2014). Boiling characteristics on the reduced graphene oxide films. Experimental Thermal and Fluid Science, 60, 361–366.
12. Ahn, H. S., Kim, J. M., Kim, T., Park, S. C., Kim, J. M., Park, Y., Yu, D. I., Hwang, K. W., Jo, H. J., Park, S. H., Kim, H., & Kim, M. H. (2014). Enhanced heat transfer is dependent on thickness of graphene films: The heat dissipation during boiling. Scientific Reports, 4.
11. Kim, S. H., Kang, J. Y., Ahn, H. S., Jo, H. J., & Kim, M. H. (2013). Study of Leidenfrost mechanism in droplet impacting on hydrophilic and hydrophobic surfaces. International Journal of Air Conditioning and Refrigeration, 21.
10. Jo, H. J., Kim, S. H., Kim, H., Kim, J., & Kim, M. H. (2012). Nucleate boiling performance on nano/microstructures with different wetting surfaces. Nanoscale Research Letters, 7, 242.
9. Jo, H. J., Ahn, H. S., Kang, S. H., & Kim, M. H. (2011). A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces. International Journal of Heat and Mass Transfer, 54, 5643–5652.
8. Ahn, H. S., Jo, H. J., Kang, S. H., & Kim, M. H. (2011). Effect of liquid spreading due to nano/microstructures on the critical heat flux during pool boiling. Applied Physics Letters, 98, 071908.
7. Ahn, H. S., Kang, S. H., Jo, H. J., Kim, H., & Kim, M. H. (2011). Visualization study of the effects of nanoparticles surface deposition on convective flow boiling CHF from a short heated wall. International Journal of Multiphase Flow, 37, 215–228.
6. Kim, S., Kim, H. D., Kim, H., Ahn, H. S., Jo, H. J., Kim, J., & Kim, M. H. (2010). Effects of nano-fluid and surfaces with nano structure on the increase of CHF. Experimental Thermal and Fluid Science, 34, 487–495.
5. Ahn, H. S., Kim, H., Jo, H. J., Kang, S. H., Chang, W. P., & Kim, M. H. (2010). Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface. International Journal of Multiphase Flow, 36, 375–384.
4. Ahn, H. S., Lee, C., Kim, H., Jo, H. J., Kang, S. H., Kim, J., Shin, J. S., & Kim, M. H. (2010). Pool boiling CHF enhancement by micro/nanoscale modification of Zircaloy-4 surface. Nuclear Engineering and Design, 240, 3350–3360.
3. Jo, H. J., Kim, H., Ahn, H. S., Kang, S. H., Kim, J., Shin, J. S., & Kim, M. H. (2010). Experimental study of pool boiling for enhancing the boiling heat transfer by hydrophobic dots on silicon surface. Transactions of KSME B, 6, 655–663.
2. Ahn, H. S., Kim, H. D., Jo, H. J., Kang, S. H., & Kim, M. H. (2009). Experimental investigation on the pool boiling critical heat flux of water-based alumina and titania nanofluids on a flat plate heater. Transactions of KSME B, 10, 729–736.
1. Kang, S. H., Ahn, H. S., Jo, H. J., Kim, M. H., Kim, H., & Kim, J. (2009). Experimental investigation of CHF enhancement on the modified surface under pool boiling. Transactions of KSME B, 11, 840–848