XT
Remote extension module that allows to connect 16 signals (audio, CV, gate or whatever) between large or spread-out cases.
To avoid bleeding, signals are isolated with a ground line between them (both in the ribbon cable and the printed circuit).
The bundle consists in two XT modules and two ribbon cables (1, 1.5 or 2 meters depending on the option selected).
This is a passive module, it does not draw any current.
5 HP
Bill Of Materials for DIY option:
4x PCBs - included in the partial kit
2x header box, 2x8 pin (2,54mm pitch)
32x Thonkiconns PJ398SMÂ
2x 16p ribbon cable