When The Light is Turned On

A problem in the system may be indicated under the following conditions. Make an appointment at your nearest Authorised Mazda Service Centre for further inspection.

• The light does not turn on when the ignition is switched ON.

• The light continues to remain on even though the i-stop OFF switch has been pressed while the engine is running.

When The Light is Flashing

The light continues to flash if the system has a malfunction. Make an appointment at your nearest Authorised Mazda Service Centre for further inspection.

When the LAS & LDWS is turned off, press the LAS & LDWS OFF switch.

In the following cases, the LAS & LDWS is cancelled automatically and the LAS & LDWS OFF indication is displayed in the multi-information display.

• There is a malfunction in the power steering.

• There is a malfunction in the TCS.

• There is a malfunction in the Forward Sensing Camera (FSC).

The light illuminates if there is a malfunction in the LED headlight. Make an appointment at your nearest Authorised Mazda Service Centre for further inspection. 

If the windscreen area in front of the Forward Sensing Camera (FSC) is fogged or obstructed, the light turns on temporarily. If the (amber) light remains turned on, there may be a problem with the system. Make an appointment at your nearest Authorised Mazda Service Centre for further inspection. 

The SBS system can be temporarily deactivated. When the SBS system is turned off, the SBS OFF indicator (amber) light turns on. If the Smart City Brake Support (SCBS)   is operating, the indicator light (red) flashes. 

This indicator light stays on for a few seconds when the ignition is switched ON. If the TCS or DSC is operating, the indicator light flashes.

If the light stays on, the TCS, DSC or the brake assist system may have a malfunction and they may not operate correctly. Take your vehicle to an Authorised Mazda Service Centre for further inspection.

This indicator light stays on for a few seconds when the ignition is switched ON. It also illuminates when the TCS OFF switch is pressed and TCS is switched off. If the light remains illuminated and the TCS is not switched off, take your vehicle to an Authorised Mazda Service Centre for further inspection. 

If the ABS warning light stays on while you're driving, the ABS control unit has detected a system malfunction. If this occurs, your brakes will function normally as if the vehicle had no ABS. Should this happen, consult to an expert and take your vehicle to an Authorised Mazda Service Centre for further inspection. 

If this light illuminates while driving, the vehicle may have a problem. It is important to note the driving conditions when the light is illuminated and consult an expert repairer. The check engine light may illuminate in the following cases:

• The engine's electrical system has a problem.

• The emission control system has a problem.

• The fuel tank level being very low or approaching empty.

If the check engine light remains on, or it flashes continuously, do not drive at high speeds and take your vehicle to an Authorised Mazda Service Centre for further inspection.

Mazda’s battery light might pop up as a result of a malfunctioning battery or problems with your vehicle’s voltage regulator or internal wiring. Take your vehicle to an Authorised Mazda Service Centre for further inspection. 

This warning light indicates low engine oil pressure. If the light remains illuminated even though the oil level is normal or after adding oil, stop the engine immediately and have your vehicle towed to the nearest Mazda Authorised Service Centre. 

This warning light indicates that the engine oil level is around the MINIMUM mark. 

The light flashes when the engine coolant temperature is extremely high and illuminates when the engine coolant temperature increases further.

• Flashing light - Drive slowly to reduce engine load until you can find a safe place to stop the vehicle and wait for the engine to cool down.

• Illuminated light- This indicates the possibility of overheating. Park the vehicle in a safe place immediately and stop the engine.

When illuminated

The wrench indicator light turns on under the following conditions:

• When the preset maintenance period has arrived.

• When it’s time to replace the engine oil.

When flashing (SKYACTIV-D 2.2)

The sedimentor separates water from the fuel. If water accumulates in this filter, the warning light will flash. When it does, take your vehicle to an Authorised Mazda Service Centre for further inspection.

If the tyre pressure monitoring system warning light illuminates or flashes, or the tyre pressure warning beep sound is heard, decrease vehicle speed immediately and avoid sudden manoeuvring and braking. To determine if you have a slow leak or a flat, pull over to a safe position where you can check the visual condition of the tyre and determine if you have enough air to proceed to a place where air may be added and the system monitored again by an expert. 

Master Warning Indication

Displays when notification of the system malfunction is required. Check the message indicated in the display and consult with an expert repairer at Mazda Authorised Service Centre.

Master Warning Light

The master warning light displays when a warning message occurs. This indicates a malfunction with the vehicle system. Consult with an expert repairer at Mazda Authorised Service Centre.

This red alert is meant to notify you that the airbags system malfunction in your Mazda might not be working in an accident. It’s important to bring your vehicle to an Authorised Mazda Service Centre for further inspection. 

This warning has the following functions:

Parking brake warning/Indicator light inspection

The light illuminates when the electric parking brake (EPB) is applied with the ignition switched to START or ON. It turns off when the electric parking brake (EPB) is released.

When The Light is Turned On

If the light remains turned on even if the Electric Parking Brake (EPB) switch is released, take your vehicle to the nearest Mazda Authorised Service Centre for further inspection.

When The Light is Flashing

The light flashes if the electric parking brake (EPB) has a malfunction. If the light remains flashing even if the electric parking brake (EPB) switch is operated, take your vehicle to the nearest Mazda Authorised Service Centre for further inspection as soon as possible.

The Auto Hold (ACTIVE) indicator light illuminates in the information display when the system holds your vehicle stationary. 

If the engine does not start with the correct key, and the security indicator light remains illuminated or flashing, try the following:

• Make sure the key is within the operational range for signal transmission.

• Switch the ignition off, and then restart the engine.

If the engine does not start after 3 or more tries, contact Mazda Authorised Service Centre for further inspection.

The light turns on if any door/liftgate is not closed securely. 

Turn and Lane-Change Signals

The direction indicators in the instrument cluster flash according to the operation of the direction indicator lever to show which signal is working.

Hazard Warning Flasher

The hazard warning flashers warn other road users using all of the car's direction indicator lamps flashing simultaneously when this function is activated. Both direction indicator symbols in the combined instrument panel flash when the hazard warning flashers are used.

When the headlight high-beams are on, the headlight high-beam indicator light is turned on. The headlight high-beam indicator light in the instrument cluster illuminates simultaneously. The lever will return to the normal position when released. 

When the lights are turned on, the lights-on indicator light in the instrument cluster will turn on. 

If the brake system warning light remains illuminated even though the parking brake is released, the brake fluid may be low or there could be a problem with the brake system. Park the vehicle in a safe place immediately and contact Mazda Authorised Service Centre for further inspection. 

When the lights are turned on, the rear fog lights indicator light in the instrument cluster turns on. 

This message is displayed if the advanced keyless entry & push-button start system has a problem. Contact Mazda Authorised Service Centre for further inspection.

"Set Power to OFF" is displayed

This message is displayed when the driver's door is opened without switching the ignition off.

"Key not found" is displayed

This message is displayed when any of the following operations is performed with the key out of the operational range or placed in areas inside the cabin where it is difficult for the key to be detected.

• The push-button start is pressed with the ignition switched off.

• The ignition is switched on.

• All doors are closed without switching the ignition off.

If the key warning indicator light illuminates (RED), there is could be any malfunction in the advance keyless entry system. Have the vehicle inspected at an Authorised Mazda Service Centre.

当灯亮的时候

以下情况可能表明系统存在问题。请预约就近的马自达授权服务中心进行进一步检查。 

• 点火开关打开时，指示灯不亮。

• 即使在发动机运转时按下 i-stop OFF 开关，指示灯仍亮着。

指示灯闪烁时

如果系统出现故障，指示灯会继续闪烁。请预约就近的马自达授权服务中心进行进一步检查。

当 LAS & LDWS 关闭时，按下 LAS & LDWS OFF 开关。

在以下情况下，LAS & LDWS 会自动取消，并且多信息显示屏上会显示 LAS & LDWS OFF 指示。

• 动力转向出现故障。

• TCS 出现故障。

• 前向感应摄像头 (FSC) 出现故障。

如果 LED 大灯出现故障，该灯会亮起。请预约就近的马自达授权服务中心进行进一步检查。

如果前向感应摄像头 (FSC) 前方的挡风玻璃区域起雾或被遮挡，该灯会暂时亮起。如果 (琥珀色) 灯一直亮着，则系统可能有问题。请预约就近的马自达授权服务中心进行进一步检查。

SBS 系统可暂时停用。当 SBS 系统关闭时，SBS OFF 指示灯（琥珀色）亮起。如果智能城市制动支持 (SCBS) 正在运行，指示灯（红色）会闪烁。

点火开关打开时，此指示灯会亮起几秒钟。如果 TCS 或 DSC 正在运行，指示灯会闪烁。

如果指示灯一直亮着，则 TCS、DSC 或制动辅助系统可能出现故障，无法正常运行。请将您的车辆送至马自达授权服务中心进行进一步检查。

当点火开关打开时，此指示灯会亮起几秒钟。当按下 TCS OFF 开关并关闭 TCS 时，此指示灯也会亮起。如果指示灯持续亮起且 TCS 未关闭，请将您的车辆送至马自达授权服务中心进行进一步检查。

如果在驾驶过程中 ABS 警告灯一直亮着，则表明 ABS 控制单元检测到系统故障。如果发生这种情况，您的刹车将正常工作，就像车辆没有 ABS 一样。如果发生这种情况，请咨询专家并将您的车辆送至授权马自达服务中心进行进一步检查。

如果此灯在行驶过程中亮起，则车辆可能有问题。注意灯亮时的驾驶条件并咨询专业维修人员非常重要。检查引擎灯可能在以下情况下亮起：

• 发动机的电气系统有问题。

• 排放控制系统有问题。

• 油箱油位非常低或接近空。

如果检查引擎灯一直亮着，或持续闪烁，请勿高速行驶，并将您的车辆送至授权马自达服务中心进行进一步检查。

马自达的电池灯可能会因电池故障或车辆电压调节器或内部线路问题而亮起。请将您的车辆送至马自达授权服务中心进行进一步检查。

此警告灯表示发动机油压低。如果油位正常或加油后灯仍然亮起，请立即停止发动机并将车辆拖至最近的马自达授权服务中心。

此警告灯表示发动机油位处于最低标记附近。

当发动机冷却液温度极高时，灯会闪烁，当发动机冷却液温度进一步升高时，灯会亮起。

• 闪烁灯 - 缓慢行驶以减少发动机负荷，直到找到安全的地方停车并等待发动机冷却。

• 亮灯 - 表示可能过热。立即将车辆停在安全的地方并停止发动机。

亮起时

扳手指示灯在以下情况下亮起：

预设保养期已到。

需要更换发动机油时。

闪烁时（SKYACTIV-D 2.2）

沉淀器将水与燃料分离。如果此过滤器中积聚了水，警告灯将闪烁。如果出现这种情况，请将您的车辆送至授权马自达服务中心进行进一步检查。

如果轮胎压力监测系统警告灯亮起或闪烁，或听到轮胎压力警告蜂鸣声，请立即降低车速并避免突然操纵和制动。要确定轮胎是缓慢漏气还是爆胎，请将车停在安全位置，在那里您可以检查轮胎的视觉状况并确定是否有足够的空气前往可以充气的地方，然后由专家再次监测系统。

主警告指示

当需要通知系统故障时显示。检查显示屏上显示的信息并咨询马自达授权服务中心的专业维修人员。

主警告灯

当出现警告信息时，主警告灯会显示。这表示车辆系统出现故障。咨询马自达授权服务中心的专业维修人员。

此红色警报旨在通知您，您的马自达汽车的安全气囊系统可能因故障无法在事故中工作。请务必将您的车辆送至马自达授权服务中心进行进一步检查。

此警告具有以下功能：

驻车制动器警告/指示灯检查

当点火开关切换至 START 或 ON 且使用电子驻车制动器 (EPB) 时，指示灯亮起。当松开电子驻车制动器 (EPB) 时，指示灯熄灭。

指示灯亮起时

如果即使松开电子驻车制动器 (EPB) 开关，指示灯仍亮起，请将您的车辆送至最近的马自达授权服务中心进行进一步检查。

指示灯闪烁时

如果电子驻车制动器 (EPB) 出现故障，指示灯会闪烁。如果即使操作电子驻车制动器 (EPB) 开关，指示灯仍闪烁，请尽快将您的车辆送至最近的马自达授权服务中心进行进一步检查。

当系统保持您的车辆静止时，自动保持（ACTIVE）指示灯会在信息显示屏上亮起。

如果发动机无法使用正确的钥匙启动，且安全指示灯持续亮起或闪烁，请尝试以下操作：

• 确保钥匙在信号传输的操作范围内。

• 关闭点火开关，然后重新启动发动机。

如果尝试 3 次或更多次后发动机仍未启动，请联系马自达授权服务中心进行进一步检查。

如果任何门/后尾门未关紧，则灯会亮起。

前照灯远光灯打开时，前照灯远光灯指示灯亮起。组合仪表中的前照灯远光灯指示灯同时亮起。松开控制杆后，控制杆将返回正常位置。

当车灯打开时，组合仪表上的车灯开启指示灯会亮起。

如果即使松开驻车制动器，制动系统警告灯仍然亮着，则制动液可能不足或制动系统可能有问题。立即将车辆停放在安全的地方，并联系马自达授权服务中心进行进一步检查。

当打开灯光时，仪表盘上的后雾灯指示灯亮起。

如果高级无钥匙进入和按钮启动系统出现问题，则会显示此消息。请联系马自达授权服务中心进行进一步检查。

显示“将电源设置为关闭”

当驾驶员车门打开且未关闭点火开关时，会显示此消息。

显示“未找到钥匙”

当钥匙超出操作范围或放置在车厢内难以检测到钥匙的区域时，会显示此消息。

• 在关闭点火开关的情况下按下按钮启动。

• 打开点火开关。

• 在未关闭点火开关的情况下关闭所有车门。

如果钥匙警告指示灯亮起（红色），则高级无钥匙进入系统可能存在任何故障。请将车辆送至马自达授权服务中心进行检查。